| 查看: 1658 | 回复: 13 | |||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | |||
wangcody木虫 (小有名气)
|
[交流]
第一篇文章等了3个月的审稿意见，怎么修改，还有戏吗？急急急！跪求指点。
|
||
|
Reviewer(s)' Comments to Author: Referee: 1 Comments to the Author This paper reports the preparation of a poly(propylene fumarate) (PPF) -based polymer. The polymer is prepared by radical polymerization of PPF and PPF-diacrylate (PPF-DA) macromers under UV radiation. The authors claim that this polymer is suitable for LED encapsulants due to its high transparency (90%), high refractive index (n = 1.54) and good thermal properties (stable below 270 °C). The paper is original within the reviewer’s knowledge. However, after comparing with a current LED encapsulant solution - silicone, the reviewer does not think that the polymer reported in this paper present advantages over the current solution. Comparing with commercially available silicone products, for example, Dow Corning® Silicone Optical Encapsulant (abbreviated as “silicone” below) [1]: 1. Transparency: one of the most important characteristic of an LED encapsulant is its transparency. Silicone has a transparency of greater than 99% at 450 nm, 1 mm thick; while the reported polymer only has a transparency of 90%. A 10%-absorption is non-trivial in LED applications. 2. Refractive index: Phenyl silicone has a refractive index of 1.53 – 1.54; the reported polymer has a refractive index of 1.54. 3. Thermal stability: Silicone has an operational temperature range of -45 to 200 °C; the reported polymer does have a higher maximum operational temperature (270 °C). However, given the fact that current LED chips usually have a maximum operating temperature around 150 °C [2], better thermal stability at a temperature that is higher than 200 °C does not provide any practical benefits. Thus, the reviewer would not suggest the publication of this paper. Reference: [1] http://www.dowcorning.com/applic ... tk=ProductFinder_en [2] http://www.cree.com/xlamp_app_notes/thermal_management Referee: 2 Comments to the Author LED encapsulant is one of critical components in LED packaging. Epoxy or silicone base resins have been used used in industry. In this article, the author introduced poly(propylene fumarate based resin encapsulant and analyzed it's material property as an alternative. Co-polymer between PPF and PPF-DA has been used as a base material. The result showes promising optical property and thermo-mechanical properties, thus, indicating that PPF and PPF-DA polymeric material can be a good candidate for LED encapsulation. Overall it is an interesting article for both industry and academia but there is a couple of comments need to be addressed to make the manuscript more beneficial. 1. In the introduction part, the author mentioned about bio-compatible and environment-friendly degradability of PPF as one of it's advantage. However, as a LED encapsulant material, it has to survive through extreme external environmental conditions. So I recommend the authors to rephrase it more carefully. For instance, upon the copolymerization with PPF-DA, how it forms thermoset polymeric structure and it's corresponding mechanical properties. 2. Light transmittance. The result shows transmittance of 90% in visible light but many commercially available material shows higher than 98%. Is there a way to improve the transmittance? 3. Thermal stability. The author applied temperature scan upto 1000C. It is one of ways to show thermal stability of thermoset resin; however, more effective ways (used in industry) is to store the resin at 150C for a long period of time (i.e. 250hr or 500hr) and compare it's light transmittance changes before/after. The result will demonstrate the degree of deterioration and yellowing of materials. 4. Any residual heat of reaction. The manuscript does not show the degree of completion of the reaction. It is very important to achieve high reaction conversion because any unreacted functional groups in the polymeric network have potential to alter the material properties (modulus, adhesion, refractive index, etc.) later once they have chance to resume reaction. It is highly recommended to include DSC analysis. For instance, 1st temperature scan showing the heat of reaction and followed by 2nd temp. scan to verify any residual heat of reaction. Referee: 3 Comments to the Author A novel UV-crosslinkable poly(propylene fumarate) (PPF) based polymer composite with good thermal stability and high refractive index (n=1.54) was explored, which can be used for encapsulation of light emitting diodes (LEDs). Polymer composite have been prepared by radical polymerization using PPF and poly(propylene fumarate)-diacrylate (PPF-DA) macromers. Detailed measurement, include thermal gravity analysis, refractive index, transparency and mechanical properties (bonding strength and tensile-shear strength) of the polymer composite with different PPF/PPF-DA ratio, have been provided and proved its suitability for encapsulation of LEDs. There is one problem: Part 2.4, paragraph 2: “The bonding strengths of …… was found to be significantly stronger than ……. However, no significant difference was found in the bonding strengths among …….” The content makes confusion. |
回复此楼» 猜你喜欢
又一批高校组建人工智能学院 师资行吗 不是骗人吗
已经有7人回复
-
国自然面上和省基金B类撒花
已经有18人回复
-
有没有学校收留
已经有3人回复
-
312求调剂
已经有3人回复
-
华师大读博
已经有5人回复
-
急需审稿人！！！
已经有3人回复
-
申博/考博
已经有8人回复
-
295分求调剂
已经有6人回复
-
085600材料与化工调剂
已经有6人回复
-
有没有接收比较快的sci期刊呀，最好在一个月之内的，研三孩子求毕业
已经有7人回复
» 本主题相关价值贴推荐，对您同样有帮助:
- OE 投稿一个月，只有一个审稿人审稿，这种情况编辑会继续找新的审稿人吗？
已经有4人回复
- 只有一个审稿人 三行意见 大修
已经有22人回复
- PCCP投稿后20天说需要多一个审稿人
已经有11人回复
- SCI期刊小修修回3个月啦~~~~~~~我该怎么办？
已经有48人回复
- 第一篇sci大修，审稿人一因创新性不够要求拒稿，该怎么回复
已经有6人回复
- 三个外审专家，一个拒稿，还有戏吗？
已经有12人回复
- 大修审稿意见，重金求教如何回复
已经有49人回复
- sci审稿意见求助？
已经有13人回复
- 文章已收，大家帮忙看看编辑部返回的修改意见？
已经有14人回复
- 审稿意见求助(是小修还是大改？)
已经有13人回复
- 会议论文一个审稿接受，一个建议修改，另一个直接拒绝，录用的可能性还大吗
已经有4人回复
- 一个审稿人建议小修，另一个审稿人拒稿，最后编辑拒稿，怎么办？
已经有15人回复
- 三个审稿人,一个直接拒掉,两个要大修,各位看看还有戏没?
已经有15人回复
- 第一次投稿，中文核心CSSCI，退修，流程是在编辑部，但含审稿专家意见，请问有戏吗
已经有12人回复
- 审稿人提的意见不合适怎么办
已经有8人回复
- 修改后回复审稿人建议格式问题
已经有6人回复
- 投JAFC的文章，这样的回复该进行什么程度的修改？
已经有4人回复
- 3个审稿人，2个同意录用，1个审稿人始终拒稿，结果会如何？
已经有74人回复
- 技术审查后，文章修改地方过多，怎么在respone里面回答，急急急？
已经有17人回复
- 【已解决】急问啊，国际会议一个审稿意见接受一个审稿意见拒绝、
已经有9人回复
- 一审意见回来了，一个审稿人竭力推荐发表，另一个认为无新意...
已经有34人回复
- 投稿三个月了，还是没有消息
已经有7人回复
- 会议论文同意接收后，怎么对待审稿意见？
已经有9人回复
wangcody
木虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 2084
- 散金: 3
- 帖子: 291
- 在线: 113小时
- 虫号: 1129315
- 注册: 2010-10-22
- 性别: GG
- 专业: 生物医用高分子材料
|
编辑开头的一段话： Thank you for your submission to RSC Advances. Again, please accept my apologies for the delay in returning a decision on this manuscript. This was due to the initial information provided that the was a resubmission of a previously submitted manuscript, which delayed the initial review stages, followed by further delays due to the need to obtain a third adjudicative report in order to come to an informed decision. We have now received all the reviewers’ reports on your manuscript, which are copied below. The reviewers feel that some modifications are necessary before publication can be considered. However providing that the comments of the reviewers are addressed in full I will be pleased to consider a revised manuscript. The manuscript will be subject to further peer review prior to reaching a final decision on acceptance. |
3楼2015-04-14 10:07:21
wangcody
木虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 2084
- 散金: 3
- 帖子: 291
- 在线: 113小时
- 虫号: 1129315
- 注册: 2010-10-22
- 性别: GG
- 专业: 生物医用高分子材料
|
编辑开头的一段话如下： Thank you for your submission to RSC. Again, please accept my apologies for the delay in returning a decision on this manuscript. This was due to the initial information provided that the was a resubmission of a previously submitted manuscript, which delayed the initial review stages, followed by further delays due to the need to obtain a third adjudicative report in order to come to an informed decision. We have now received all the reviewers’ reports on your manuscript, which are copied below. The reviewers feel that some modifications are necessary before publication can be considered. However providing that the comments of the reviewers are addressed in full I will be pleased to consider a revised manuscript. The manuscript will be subject to further peer review prior to reaching a final decision on acceptance. |
4楼2015-04-14 10:08:50
5楼2015-04-14 13:42:53
chenbaorui
金虫 (职业作家)
- 应助: 2 (幼儿园)
- 金币: 1459.1
- 散金: 1601
- 红花: 4
- 帖子: 3073
- 在线: 175.8小时
- 虫号: 3083184
- 注册: 2014-03-24
- 专业: 无机非金属基复合材料
6楼2015-04-14 13:51:38
5