应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台 » 材料区 » 微米和纳米 » 前沿热点 » 纳米材料研究动态系列报道专栏
181/2返回列表12下一页
查看: 998  |  回复: 17
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看
当前主题已经存档。

wshk1980

木虫 (著名写手)

[交流] 纳米材料研究动态系列报道专栏

希望大家多多分享好资料，了解纳米材料最新进展！！！
如有支持者将资料发到此主题，谢谢！！！！
希望大家多多支持！！！！
我先抛砖引玉！！！！

美化学家发现金纳米棒自发地将自己组装成一种环状超结构
Science Daily — Rice University chemists have discovered that tiny building blocks known as gold nanorods spontaneously assemble themselves into ring-like superstructures.
链接：http://www.SciEI.com/news/science/Chemistry/Index.html
This finding, which will be published the chemistry journal Angewandte Chemie, could potentially lead to the development of novel nanodevices like highly sensitive optical sensors, superlenses, and even invisible objects for use in the military.

“Finding new ways to assemble nano-objects into superstructures is an important task because at the nanoscale, the properties of those objects depend on the arrangement of individual building blocks,” said principal investigator Eugene Zubarev, the Norman Hackerman-Welch Young Investigator and assistant professor of chemistry at Rice.

Although ring-like assemblies have been observed in spherical nanoparticles and other symmetrical molecules, until now such structures had not been documented with rod-shaped nanostructures.

Like many nanoscale objects, gold nanorods are several billionths of a meter, or 1,000 times smaller than a human hair. Zubarev used hybrid nanorods for this research because attached to their surface are thousands of polymer molecules, which are flexible chainlike structures. The central core of the nanorods is an inorganic crystal, but the polymers attached to the outside are organic species. The combination of the inorganic and organic features resulted in a hybrid structure that proved to be critical to the study.

英文全文：http://www.sciencedaily.com/releases/2007/03/070310145606.htm

[ Last edited by popsheng on 2007-4-28 at 18:12 ]
回复此楼

» 猜你喜欢

» 本主题相关商家推荐: (我也要在这里推广)
1楼 2007-03-22 20:49:37
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wshk1980

木虫 (著名写手)
Aberration-Corrected Imaging of Active Sites on Industrial Catalyst
Nanoparticle

Lionel Cervera Gontard, Lan-Yun Chang, Crispin J. D. Hetherington, Angus I. Kirkland,
Dogan Ozkaya, and Rafal E. Dunin-Borkowski

Angew. Chem. Int. Ed. 2007, 46, 1 – 4

http://www3.interscience.wiley.c ... /114199478/PDFSTART
赞一下 回复此楼
2楼2007-03-24 14:00:24
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wshk1980

木虫 (著名写手)
评价一下啊！！！！！！！！！！！！！
回复此楼
3楼2007-03-29 16:27:40
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

604gq

木虫 (职业作家)

学历太低不辨东西南北
不错的资源!
回复此楼
坚决贯彻“灌水有理，一灌到底，乱灌不上税，灌死不负责”的大无畏精神。
4楼2007-03-29 18:47:14
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zhaokelun1975

木虫 (著名写手)
IBM将摩尔定律推进到三维时代


赛迪网2007年4月27日讯    日前，IBM宣布在制造环境中实现了一种突破性的芯片堆叠技术，此举为制造三维芯片扫清了障碍，摩尔定律也将因此而突破原来预期的极限。这种被称为“穿透硅通道（through-silicon vias）”的技术可以大大缩小不同芯片组件之间的距离，从而设计出速度更快、体积更小和能耗更低的系统。

    IBM的这项突破实现了从二维芯片设计到三维芯片堆叠的转变，将传统上并排安装在硅圆片上的芯片和内存设备以堆叠的方式相互叠加在一起，最终实现了一种紧凑的组件层状结构，大大减小了芯片的体积，并提高了数据在芯片上各个功能区之间的传输速度。

    IBM半导体研发中心副总裁Lisa Su表示：“这一突破性的进展是IBM开展十多年探索研究的成果。我们可以将三维芯片从实验室走向制造生产环节，来支持各种各样的应用。”

    这种IBM新方法是依靠新的穿透硅通道技术而非长金属电线来连接目前的二维芯片，这实际上是在硅圆片上蚀刻出来的垂直连接通道，并在其中注满金属。这些通道可以使多个芯片堆叠在一起，同时支持芯片之间更大信息量的传输。

    这项工艺将信息在芯片上传输的距离缩短了1000倍，与二维芯片相比可以增加最多100倍的信息通道或路径。

    IBM已经在自己的生产线上运行使用这种穿透硅通道技术的芯片，并将在2007年下半年开始为客户提供使用这种方法制造的芯片样本，同时在2008年投入生产。这种穿透硅通道技术最早将被用于无线通信芯片领域，这些芯片将被安装在无线LAN和蜂窝应用所使用的功率放大器之中。另外，三维技术也将应用于更广泛的芯片应用领域，包括目前那些运行在IBM高性能服务器和超级计算机中的芯片，这些服务器和超级计算机支持着全球的商业活动、政府和科学研究工作。
赞一下 回复此楼
5楼2007-04-28 17:06:23
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zhaokelun1975

木虫 (著名写手)
New nanocomposite processing technique creates more powerful capacitors

9X"M-a(n4d4x:cS|Scanning electron micrographs of barium titanate (BaTiO3) nanocomposites with polycarbonate (left, top and bottom) and Viton (right, top and bottom) polymer matrices. The images show the dramatic improvement in film uniformity through the use of phosphonic acid coated BaTiO3 nanoparticles (bottom images) as compared to uncoated nanoparticles (top images). Credit: Image courtesy of Joe PerryA new technique for creating films of barium titanate (BaTiO3) nanoparticles in a polymer matrix could allow fabrication of improved capacitors able to store twice as much energy as existing devices. The improved capacitors could be used in consumer devices such as cellular telephones – and in defense applications requiring both high energy storage and rapid current discharge.
Because of its high dielectric properties, barium titanate has long been of interest for use in capacitors, but until recently materials scientists had been unable to produce good dispersion of the material within a polymer matrix. By using tailored organic phosphonic acids to encapsulate and modify the surface of the nanoparticles, researchers at the Georgia Institute of Technology’s Center for Organic Photonics and Electronics were able to overcome the particle dispersion problem to create uniform nanocomposites.

Our team has developed nanocomposites that have a remarkable combination of high dielectric constant and high dielectric breakdown strength," said Joseph W. Perry, a professor in the Georgia Tech School of Chemistry and Biochemistry and the Center for Organic Photonics and Electronics. "For capacitors and related applications, the amount of energy you can store in a material is related to those two factors."

The new nanocomposite materials have been tested at frequencies of up to one megahertz, and Perry says operation at even higher frequencies may be possible. Though the new materials could have commercial application without further improvement, their most important contribution may be in demonstrating the new encapsulation technique – which could have broad applications in other nanocomposite materials.

"This work opens a door to effectively exploit this type of particle in nanocomposites using the coating technology we have demonstrated," explained Perry. "There are many ways we can envision making advances beyond what we’ve done already."
www.nanost.net
The results were reported in the April 2007 edition (Vol. 19, issue 7) of the journal Advanced Materials. The research was supported by the Office of Naval Research and the National Science Foundation. Georgia Tech has filed a patent application on the nanoparticle encapsulation technique.
Because of their ability to store and rapidly discharge electrical energy, capacitors are used in a variety of consumer products such as computers and cellular telephones. And because of the increasing demands for electrical energy to power vehicles and new equipment, they also have important military applications.

Key to developing thin-film capacitor materials with higher energy storage capacity is the ability to uniformly disperse nanoparticles in as high a density as possible throughout the polymer matrix. However, nanoparticles such as barium titanate tend to form aggregates that reduce the ability of the nanocomposite to resist electrical breakdown. Other research groups have tried to address the dispersal issue with a variety of surface coatings, but those coatings tended to come off during processing – or to create materials compatibility issues.

The Georgia Tech research team decided to address the issue by using organic phosphonic acids to encapsulate the particles. The tailored organic phosphonic acid ligands, designed and synthesized by a research group headed by Seth Marder – a professor in the Georgia Tech School of Chemistry and Biochemistry – provide a robust coating for the particles, which range in size from 30 to 120 nanometers in diameter.

"Phosphonic acids bind very well to barium titanate and to other related metal oxides," Perry said. "The choice of that material and ligands were very effective in allowing us to take the tailored phosphonic acids, put them onto the barium titanate, and then with the correct solution processing, to incorporate them into polymer systems. This allowed us to provide good compatibility with the polymer hosts – and thus very good dispersion as evidenced by a three- to four-fold decrease in the average aggregate size."

gThough large crystals of barium titanate could also provide a high dielectric constant, they generally do not provide adequate resistance to breakdown – and their formation and growth can be complex and require high temperatures. Composites provide the necessary electrical properties, along with the advantages of solution-based processing techniques.

"One of the big benefits of using a polymer nanocomposite approach is that you combine particles of a material that provide desired properties in a matrix that has the benefits of easy processing," Perry explained.

Though the new materials may already offer enough of an advantage to justify commercializing, Perry believes there are additional opportunities for boosting their performance. The research team also wants to scale up production to make larger samples – now produced in two-inch by three-inch films – available to other researchers who may wish to develop additional applications.

Perry and Marder are working with Bernard Kippelen, a professor in the Georgia Tech School of Electrical and Computer Engineering, on the use of these new nanocomposites in organic thin-film transistors in which solution-based techniques are used to fabricate inexpensive electronic components.

"Beyond capacitors, there are many areas where high dielectric materials are important, such as field-effect transistors, displays and other electronic devices," Perry added. "With our material, we can provide a high dielectric layer that can be incorporated into those types of applications."

Source: Georgia Institute of Technology
赞一下 回复此楼
6楼2007-04-28 17:32:30
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zhaokelun1975

木虫 (著名写手)
Scientists Hand-Make Devices Smaller than 10 Nanometers
by Laura Mgrdichian

Two intersecting nanowires (left panel) were made into a four-terminal nanogap transistor (right panel) using the TEBAL method.A research team from the University of Pennsylvania has used an electron beam to hand-carve ultra-small metal structures and devices, all with dimensions below 10 nanometers, from very thin metal sheets. Their technique could impact the development of many nanotechnologies, including nanoelectronics.

Among the structures created by the two scientists, professor Marija Drndić and graduate student Michael Fischbein, the paper's lead author, are nanodisks, nanorings, nanowires, nanoholes, and multi-terminal nano-transistors.

“Many different approaches have been undertaken to fabricate the small structures needed to probe the phenomena that take place at the nanoscale, but the most widely used and versatile techniques are limited to tens of nanometers,” Drndić said to PhysOrg.com. “Reliably and consistently fabricating devices at the sub-10-nanometer scale from the top down is generally still challenging, but our technique offers a route to this regime.”
“It’s like using a magnifying glass and sun rays to sculpt an ice cube,” says Fischbein. “However, using an electron beam instead of sun rays allows for precision on the atomic scale.”

Among its advantages over other techniques, Drndić and Fischbein say, is the fact that theirs uses the imaging beam of a transmission electron microscope, which means the structures can be imaged with atomic resolution and inspected in real time as they are created. These characteristics result in structures with smooth surfaces (atomically speaking) and high reproducibility – creating nearly identical copies of the same structure.

Additionally, the technique (referred to as TEBAL, for transmission electron beam ablation lithography) allows the contacts between a nanostructure and its leads to be resistance-free, and thus more efficient. Structures made from bottom-up techniques, i.e., assembled from smaller components, typically first need to be placed on a chip and then connected to larger circuitry. TEBAL avoids these steps.

All of the structures created using TEBAL were done so by hand, with a human user guiding the electron beam and watching each structure take shape. “Computer control should offer an even higher degree of precision than we've demonstrated and produce highly intricate patterns over a wide area,” said Fischbein.

TEBAL has many potential applications in nanoscience because it has the ability to produce a wide variety of nanostructures. Running a current through TEBAL-created nanowires could allow them to be used as nanomagnets. Or, the wires could be used to test the effects of wire shape and size on their conductivity, using both regular and superconducting wires. The tiny transistors Drndić and Fischbein created have many uses in molecular electronics. Nanogap-nanohole devices can be used in the manufacture of single-molecule detectors and provide new opportunities for DNA nanopore sequencing.

This research is described in detail in the April 17, 2007, online edition of Nano Letters.

Citation: Michael D. Fischbein and Marija Drndić, “Sub-10 nm Device Fabrication in a Transmission Electron Microscope.” Nano Lett. ASAP Article, DOI: 10.1021/nl0703626

Copyright 2007 PhysOrg.com.
赞一下 回复此楼
7楼2007-04-28 17:43:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zhaokelun1975

木虫 (著名写手)
Nano Structures Can Pose Big Measurement Problems
Materials scientists will tell you that to best understand, characterize and eventually utilize the properties of a specific material, you have to be able to define how the atoms within it are arranged. In the case of common crystals, there are numerous methods, such as X-ray diffraction, by which this can be done.

Not so for nanostructured materials (structures with atomic arrangements at a scale of 1-100 nanometers, or between 5 to 1,000 atoms in size) where the inability to determine atomic order with high precision has been dubbed the “nanostructure problem.”

In a paper published in the April 27 Science, researchers Igor Levin at the National Institute of Standards and Technology and Simon J.L. Billinge at Michigan State University reviewed various classes of nanostructured materials, listed the array of methods currently used to study their atomic makeup and defined the problems inherent with each one.

Overall, the authors state that while many methods exist for probing the atomic structure on the nanoscale, no single technique can provide a unique structural solution.

The authors conclude their paper by calling for a coordinated effort by researchers to develop a coherent strategy for a comprehensive solution of the “nanostructure problem” using inputs from multiple experimental methods and theory.

Citation: S.J.L. Billinge and I. Levin. The problem with determining atomic structure at the nanoscale. Science, 316: 5823, April 27, 2007.

Source: National Institute of Standards and Technology
赞一下 回复此楼
8楼2007-04-28 17:44:30
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zhaokelun1975

木虫 (著名写手)
Placing single nanowires: NIST makes the connection

Schematic of NIST single nanowire manipulation system. Credit: NISTResearchers at the National Institute of Standards and Technology have devised a system for manipulating and precisely positioning individual nanowires on semiconductor wafers. Their technique, described in a recent paper, allows them to fabricate sophisticated test structures to explore the properties of nanowires, using only optical microscopy and conventional photolithographic processing in lieu of advanced (and expensive) tools such as focused ion or electron beams.

Nanowires and nanotubes are being studied intensively as essential elements for future nanoscale electronics, but some fundamentals remain to be worked out—among them, how to put wires only a handful of atoms in diameter where you want them. The smallest-diameter nanowires today are built in a “bottom-up” fashion, assembled atom-by-atom through a chemical growth process such as chemical vapor deposition.

Scanning electron microscope image shows a single silicon nanowire positioned in an etched trench using NIST's nanowire manipulation technique. The trench helps keep the nanowire in position during the fabrication of the rest of the test structure, which measures metal/nanowire contact resistance. The scale bar is 20 micrometers long. Credit: NISTThis is essentially a bulk process; it produces haystacks of jumbled nanowires of varying lengths and diameters. “The normal research approach,” explains NIST electronics engineer Curt Richter, “is to throw a whole bunch of these down on the test surface, hunt around with a microscope until you find a good-looking wire in about the right place, and use lithography to attach electrical contacts to it.”
To achieve better control, the NIST engineers modified a standard probe station used to test individual components in microelectronic circuits. The station includes a high-resolution optical microscope and a system for precisely positioning work surfaces under a pair of customized titanium probes with tips less than 100 nanometers in diameter.

In a two-step process, silicon nanowires suspended in a drop of water are deposited on a special staging wafer patterned with a grid of tiny posts, and dried. Resting on the tops of the posts, selected nanowires can be picked up by the two probe tips, which they cling to by static electricity. The test structure wafer is positioned under the probes, the nanowire is oriented by moving either the probe tips or the wafer, and then placed on the wafer in the desired position.

Although not at all suited to mass production, the technique’s fine level of control allows NIST engineers to place single nanowires wherever they want to create elaborate structures for testing nanowire properties. They’ve demonstrated this by building a multiple-electrical-contact test structure for measuring the resistance of a nanowire independent of contact resistance, and a simple electromechanical “switch” suitable for measuring the flexibility of nanowires. They’ve used the technique successfully with nanowires greater than about 60 nm in diameter, and say sharper probe tips and high-resolution microscopes could push the limit lower.

Citation: Q. Li, S. Koo, C.A. Richter, M.D. Edelstein, J.E. Bonevich, J.J. Kopanski, J.S. Suehle and E.M. Vogel. Precise alignment of single nanowires and fabrication of nanoelectromechanical switch and other test structures. IEEE Transactions on Nanotechnology. V.6, No.2. March 2007.

Source: National Institute of Standards and Technology
赞一下 回复此楼
9楼2007-04-28 17:45:41
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zhaokelun1975

木虫 (著名写手)
Optoelectronic tweezers push nanowires around
In efforts that can improve studies of biological objects and the construction of nanotech materials, researchers at the University of California-Berkeley have invented "optoelectronic tweezers," a new way of controlling nanometer-scale objects. The research will be presented at the upcoming CLEO/QELS meeting in Baltimore.

In the design, the researchers reflect light from a digitally controlled array of mirrors, sending the light through a magnifying lens, and then into a sandwich of semiconductor planes, creating (at the interface between two of the planes) as many as 15,000 traps that can be addressed separately. In each of the traps, objects such as biological cells can be studied

Optoelectronic tweezers, which use optical energy to create powerful electric forces in carefully prescribed places, differ from ordinary optical tweezers, which use optical energy to create mechanical forces that can push things around, helping to make the technique potentially easier for laboratories to implement.

According to Berkeley's Aaron Ohta, the optoelectronic approach uses much less power than optical tweezers and doesn't need to be as carefully focused. In recent months the Berkeley group has had some success in using their locally controlled electric fields to manipulate the positions of tiny nanorods (100 nanometers in diameter and 1-50 microns long). The rods are suspended in a thin layer of water by sound waves and then transferred to the tweezer apparatus. Ohta says that the lateral-field optoelectronic device will possibly be used to place rods for the sake of building 3-D circuitry or for positioning oblong-shaped cells or cell protrusions with micron-level precision.

Source: Optical Society of America
赞一下 回复此楼
10楼2007-04-28 17:46:33
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 wshk1980 的主题更新
181/2返回列表12下一页
普通表情 龙 兔 虎 猫 高级回复 (可上传附件)
信息提示
关闭
请填处理意见
关闭