| 查看: 1618 | 回复: 8 | |||
| 当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖 | |||
[交流]
聚合物溶解存在饱和点吗?
|
|||
|
近来在做一些聚合物的溶解实验,突然想到一个问题,聚合物是否像小分子一样存在溶解度的概念?也就是存在一个饱和点。我记得以前学习过一篇英文课文,把他找出来了,如下 Another striking difference with respect to the behavior of a polymer and that of a low molecular weight compound concerns the dissolution process. Let us take, for example, sodium chloride and add it slowly to s fixed quantity of water. The salt, which represents a low molecular weight compound, dissolves in water up to s point (called saturation point) but, thereafter, any further quantity added does not go into solution but settles at the bottom and just remains there as solid. The viscosity of the saturated salt solution is not very much different from that of water. But if we take a polymer instead, say, polyvinyl alcohol, and add it to a fixed quantity of water, the polymer does not go into solution immediately. The globules of polyvinyl alcohol first absorb water, swell and get distorted in shape and after a long time go into solution. Also, we can add a very large quantity of the polymer to the same quantity of water without the saturation point ever being reached. As more and more quantity of polymer is added to water, the time taken for the dissolution of the polymer obviously increases and the mix ultimately assumes a soft, dough-like consistency. Another peculiarity is that, in water, polyvinyl alcohol never retains its original powdery nature as the excess sodium chloride does in a saturated salt solution. In conclusion, we can say that (1) the long time taken by polyvinyl alcohol for dissolution, (2) the absence of a saturation point, and (3) the increase in the viscosity are all characteristics of a typical polymer being dissolved in a solvent and these characteristics are attributed mainly to the large molecular size of the polymer. The behavior of a low molecular weight compound and that of a polymer on dissolution are illustrated in Fig.1.2. 发现另一种不同的聚合物行为和低分子量化合物行为是关于溶解过程。例如,让我们研究一下,将氯化钠慢慢地添加到固定量的水中。盐,代表一种低分子量化合物,在水中达到点(叫饱和点)溶解,但,此后,进一步添加盐不进入溶液中却沉到底部而保持原有的固体状态。饱和盐溶液的粘度与水的粘度不是十分不同,但是,如果我们用聚合物替代,譬如说,将聚乙烯醇添加到固定量的水中,聚合物不是马上进入到溶液中。聚乙烯醇颗粒首先吸水溶胀,发生形变,经过很长的时间以后进入到溶液中。同样地,我们可以将大量的聚合物加入到同样量的水中,不存在饱和点。将越来越多的聚合物加入水中,认为聚合物溶解的时间明显地增加,最终呈现柔软像面团一样粘稠的混合物。另一个特点是,在水中聚乙烯醇不会像过量的氯化钠在饱和盐溶液中那样能保持其初始的粉末状态。总之,我们可以讲(1)聚乙烯醇的溶解需要很长时间,(2)不存在饱和点,(3)粘度的增加是典型聚合物溶于溶液中的特性,这些特性主要归因于聚合物大分子的尺寸。 上文说聚乙烯醇在水中的溶解没有饱和点,那我想问其他聚合物在他的良溶剂的溶解也没有饱和点吗? |
» 猜你喜欢
材料科学与工程求调剂
已经有5人回复
一志愿北京化工大学材料与化工(085600)296求调剂
已经有17人回复
考研调剂
已经有7人回复
343求调剂085601
已经有3人回复
08工科求调剂286
已经有3人回复
337求调剂
已经有3人回复
329求调剂,一志愿西北工业大学,材料工程(085601)
已经有10人回复
291求调剂
已经有6人回复
299求调剂
已经有10人回复
面上5B能上会吗?
已经有4人回复
» 本主题相关商家推荐: (我也要在这里推广)
» 本主题相关价值贴推荐,对您同样有帮助:
硝酸铵饱和水溶液加入丙酮后会不会影响它的溶解结晶啊。
已经有3人回复
为什么在DMF 中溶解的聚合物在氯仿中不完全溶解?
已经有8人回复
氧的饱和百分比读数转换为溶解氧的浓度
已经有5人回复
测药物在PEG400中的饱和溶解度,为什么60h的药物溶解度远远小于12h的溶解度???
已经有6人回复
等密度下超临界CO2对聚合物的溶解性
已经有10人回复
浓硫酸溶解聚合物后是黑色 是碳化了吗
已经有33人回复
不饱和聚酯 怎么溶解
已经有20人回复
过饱和的间隙固溶体和置换固溶体的回火行为
已经有13人回复
吸收乙烯时,为什么用的是溴溶解于被(溴化钾饱和的冰醋酸溶液)
已经有8人回复
四氢呋喃和饱和食盐水的溶解
已经有30人回复
请问:亚硝酸钙能溶解在饱和氯化钙的乙醇溶液中吗
已经有3人回复
地表水溶解氧的实测值大于饱和溶解氧的值,怎么处理啊?
已经有7人回复
均匀成核和非均匀成核一定是在过饱和溶液中吗?
已经有6人回复
聚合物在溶解时怎样才能减少气泡的产生?
已经有13人回复
[讨论]聚合物在溶解过程中,搅拌会断链降低分子量么?
已经有14人回复
【求助】在室温下如何抑制氯化钙饱和溶液结晶
已经有8人回复
【求助】饱和食盐水 还能溶解碳酸钠吗?
已经有9人回复
【求助】乙酸乙酯在水中的饱和溶解度
已经有6人回复
【资源】常见聚合物溶解度参数
已经有16人回复
【求助】在哪里可以查到各种有机溶剂的饱和蒸汽压?
已经有10人回复
» 抢金币啦!回帖就可以得到:
南方科技大学纳米-飞秒-超快动力学课题组---诚聘博士后/助理研究员
+1/193
三峡大学生态学招硕士调剂
+2/156
中国水产科学研究院黄海水产研究所张旭志课题组招聘 柔性传感器研究 科研助理
+2/136
东莞理工土木工程和土木水利专业硕士接受调剂,名额充足!
+1/95
中山大学附属医院实验和生信科研助理招聘
+1/77
球差相关知识
+1/37
福建师范大学环境与资源学院环境电化学课题组招收2026硕士(调剂,4月8号线上面试)
+1/29
澳大利亚昆士兰大学化工学院招收全奖博士生2名
+1/26
【实战型】【生物医药】2026青岛大学招博士生 含少数民族骨干计划2名!
+1/14
博士招生 | 青岛科技大学(高分子、化学、材料、力学、航天、机电工程、计算机仿真)
+1/13
中山大学(深圳)柔性电子学院2026级博士生招聘
+1/12
NTU招聘生物微机电系统/微流控/3D打印/可穿戴器件方向全奖博士
+1/9
08开头有调剂需求的同学
+3/7
同济大学环境学院 肖倩特聘研究员课题组 招聘硕士/博士(长期有效)
+1/6
中国科学院大学纳米科学与技术学院-罗聃课题组诚招硕士研究生
+1/5
昆工 轻工 招收调剂
+1/5
武汉纺织大学全国重点实验室吕永钢教授课题组招收材料、化学、生物相关专业硕士研究生
+1/4
5科大招收材料专业硕士
+1/3
吉林建筑大学张老师接收调剂硕士
+1/3
一志愿西南交大机械专硕343求调剂
+1/1
6楼2013-09-06 13:35:07
2楼2013-09-05 21:08:21
3楼2013-09-06 08:32:22
5楼2013-09-06 10:10:30














回复此楼
