| 查看: 1850 | 回复: 8 | |||
| 当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖 | |||
[交流]
聚合物溶解存在饱和点吗?
|
|||
|
近来在做一些聚合物的溶解实验,突然想到一个问题,聚合物是否像小分子一样存在溶解度的概念?也就是存在一个饱和点。我记得以前学习过一篇英文课文,把他找出来了,如下 Another striking difference with respect to the behavior of a polymer and that of a low molecular weight compound concerns the dissolution process. Let us take, for example, sodium chloride and add it slowly to s fixed quantity of water. The salt, which represents a low molecular weight compound, dissolves in water up to s point (called saturation point) but, thereafter, any further quantity added does not go into solution but settles at the bottom and just remains there as solid. The viscosity of the saturated salt solution is not very much different from that of water. But if we take a polymer instead, say, polyvinyl alcohol, and add it to a fixed quantity of water, the polymer does not go into solution immediately. The globules of polyvinyl alcohol first absorb water, swell and get distorted in shape and after a long time go into solution. Also, we can add a very large quantity of the polymer to the same quantity of water without the saturation point ever being reached. As more and more quantity of polymer is added to water, the time taken for the dissolution of the polymer obviously increases and the mix ultimately assumes a soft, dough-like consistency. Another peculiarity is that, in water, polyvinyl alcohol never retains its original powdery nature as the excess sodium chloride does in a saturated salt solution. In conclusion, we can say that (1) the long time taken by polyvinyl alcohol for dissolution, (2) the absence of a saturation point, and (3) the increase in the viscosity are all characteristics of a typical polymer being dissolved in a solvent and these characteristics are attributed mainly to the large molecular size of the polymer. The behavior of a low molecular weight compound and that of a polymer on dissolution are illustrated in Fig.1.2. 发现另一种不同的聚合物行为和低分子量化合物行为是关于溶解过程。例如,让我们研究一下,将氯化钠慢慢地添加到固定量的水中。盐,代表一种低分子量化合物,在水中达到点(叫饱和点)溶解,但,此后,进一步添加盐不进入溶液中却沉到底部而保持原有的固体状态。饱和盐溶液的粘度与水的粘度不是十分不同,但是,如果我们用聚合物替代,譬如说,将聚乙烯醇添加到固定量的水中,聚合物不是马上进入到溶液中。聚乙烯醇颗粒首先吸水溶胀,发生形变,经过很长的时间以后进入到溶液中。同样地,我们可以将大量的聚合物加入到同样量的水中,不存在饱和点。将越来越多的聚合物加入水中,认为聚合物溶解的时间明显地增加,最终呈现柔软像面团一样粘稠的混合物。另一个特点是,在水中聚乙烯醇不会像过量的氯化钠在饱和盐溶液中那样能保持其初始的粉末状态。总之,我们可以讲(1)聚乙烯醇的溶解需要很长时间,(2)不存在饱和点,(3)粘度的增加是典型聚合物溶于溶液中的特性,这些特性主要归因于聚合物大分子的尺寸。 上文说聚乙烯醇在水中的溶解没有饱和点,那我想问其他聚合物在他的良溶剂的溶解也没有饱和点吗? |
» 猜你喜欢
某些机构,以效率低为荣,以效率低作为存在感
已经有10人回复
今天务委会开完了,明天出结果吗
已经有11人回复
有没有大神帮我看看基金代码
已经有9人回复
2026国自然函评费到账
已经有23人回复
在坚冰还盖着北海的时候,我看到了怒放的梅花。
已经有8人回复
今日不放榜?网传国自然预计 8 月 27 日可查结果
已经有22人回复
放榜前的不淡定
已经有18人回复
什么时候开奖?
已经有13人回复
如果此刻你正在为国基感到焦虑,不妨来听听这首《基金之外》
已经有8人回复
没有任何消息-是不是就凉了
已经有10人回复
» 本主题相关商家推荐: (我也要在这里推广)
» 本主题相关价值贴推荐,对您同样有帮助:
硝酸铵饱和水溶液加入丙酮后会不会影响它的溶解结晶啊。
已经有3人回复
为什么在DMF 中溶解的聚合物在氯仿中不完全溶解?
已经有8人回复
氧的饱和百分比读数转换为溶解氧的浓度
已经有5人回复
测药物在PEG400中的饱和溶解度,为什么60h的药物溶解度远远小于12h的溶解度???
已经有6人回复
等密度下超临界CO2对聚合物的溶解性
已经有10人回复
浓硫酸溶解聚合物后是黑色 是碳化了吗
已经有33人回复
不饱和聚酯 怎么溶解
已经有20人回复
过饱和的间隙固溶体和置换固溶体的回火行为
已经有13人回复
吸收乙烯时,为什么用的是溴溶解于被(溴化钾饱和的冰醋酸溶液)
已经有8人回复
四氢呋喃和饱和食盐水的溶解
已经有30人回复
请问:亚硝酸钙能溶解在饱和氯化钙的乙醇溶液中吗
已经有3人回复
地表水溶解氧的实测值大于饱和溶解氧的值,怎么处理啊?
已经有7人回复
均匀成核和非均匀成核一定是在过饱和溶液中吗?
已经有6人回复
聚合物在溶解时怎样才能减少气泡的产生?
已经有13人回复
[讨论]聚合物在溶解过程中,搅拌会断链降低分子量么?
已经有14人回复
【求助】在室温下如何抑制氯化钙饱和溶液结晶
已经有8人回复
【求助】饱和食盐水 还能溶解碳酸钠吗?
已经有9人回复
【求助】乙酸乙酯在水中的饱和溶解度
已经有6人回复
【资源】常见聚合物溶解度参数
已经有16人回复
【求助】在哪里可以查到各种有机溶剂的饱和蒸汽压?
已经有10人回复
» 抢金币啦!回帖就可以得到:
告别流水线爽文!108万字完结仙侠《女娲石之灵石奇缘(仙界篇)》值得细品
+1/5021
2026年工程管理与智慧城市国际会议 (EMSC 2026)
+1/590
小木虫认识的老公在一起11年,去世快100天了。
+2/354
真诚征友
+1/174
基金祈福
+1/153
[IEEE出版|EI检索|推荐至SCI专刊]第22届国际电子商务工程会议征稿3天倒计时!
+1/98
从反复试错到智驱突破:固态电池研发的效率跃迁之路
+1/89
华中科技大学罗志强教授课题组招收2027年秋季入学博士研究生
+2/54
武汉,诚征男友,不异地,年龄大了
+1/35
祈福基金得中,科研生涯顺利圆满
+1/14
中山大学具身智能方向招2027届考核制博士生
+1/8
中山大学智能传感仪器方向招2027届考核制博士生
+1/6
中科院大连化学物理研究所 招聘 催化剂研发方向 科研助理 2名
+1/4
南京大学 智能驱动与感知材料实验室 诚招申请考核博士生/科研助理/博士后
+1/4
祈祷老公中国基
+1/3
新审查指南施行半年,AI方向的专利申请是不是更看"技术味"了?
+1/2
南方医科大学深圳医院陈烨/余涛教授课题组联合培养博士后招聘
+1/2
出全新蔡司 Plan?APOCHROMAT 20×/0.8 平场复消色差物镜
+1/2
2027年博士申请
+1/1
博士后申请基金命中的概率有多大?
+1/1
5楼2013-09-06 10:10:30
2楼2013-09-05 21:08:21
3楼2013-09-06 08:32:22
6楼2013-09-06 13:35:07









回复此楼
