| 查看: 1117 | 回复: 7 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
[交流]
关于化学实验的翻译求助
|
|||
|
2.1. Synthesis of cobalt ferriteCoFe2O4 (sample CFO) was synthesized by chemical coprecipitationby the following procedure. A 0.2 M solutionwas prepared by dissolving Co(NO3)26H2O (A.C.S.reagent, Aldrich) and Fe(NO3)39H2O (puriss, Fluka) in deionized water. The precipitating agent was a 5 M NaOH(reagent grade, Aldrich) solution with 100% molar excess. Both solutions were heated separately to 65 C and thenmixed under constant stirring. The temperature was raised to 80 C for 20 min, to completely crystallize the spinel phase. The precipitate was centrifuged and thoroughly washed with distilled water. The cobalt ferrite was kept in a water suspension. One small portion was dried at 80 C for characterization. 2.2. Preparation of a ferrofluid The cobalt ferrite/water suspension was heated to 80 C under gentle stirring. Oleic acid (reagent grade, Sigma– Aldrich) was added to the suspension at 30 wt.% with respect to the cobalt ferrite. The temperature was raised to 90 C for 30 min and then cooled to 60 C. Octane (reagent grade, Sigma–Aldrich) was added and the mixture was stirred for another 30 min. During this process, the nanoparticles were transferred from the aqueous phase to the organic phase, thus forming the ferrofluid. Prior to its collection, the ferrofluid was washed with distilled water in a separatory funnel to remove the non-modified particles. A gravimetric study of a 2.5 g aliquot was carried out to determine the content of inorganic material in the ferrofluid by weight difference before and after calcination at 700 C. A sample of the surface-modified ferrite was reserved before the addition of octane to determine the amount of oleic acid that reacted with the particles. The sample was dried at 80 C before performing a thermogravimetric analysis on a TGA Q500 by TA Instruments, from room temperature to 700 C at 5 min1. 2.3. Synthesis of cobalt ferrite–barium titanate core–shelltype nanostructures Core–shell-like nanostructures of CoFe2O4–BaTiO3 were synthesized by the sol–gel technique. Ba(C2H3O2)2 (A.C.S. reagent, Sigma–Aldrich) was mixed with titanium (IV) n-butoxide (reagent grade, Sigma–Aldrich), stearic acid (95%, Sigma–Aldrich) and glacial acetic acid (Aldrich) at 90 C to form a sol. The ferrofluid was added to the sol at an adequate amount so that the final nanostructures have a content of 20, 30, 40, 50 and 60 wt.% of cobalt ferrite with respect to the barium titanate, namely samples Co20, Co30, Co40, Co50 and Co60, respectively. Anhydrous 2-methoxyethanol (Aldrich) was added to promote the gel formation. The obtained gels were dried overnight at 80 C and sintered at 700 C for 2 h under the following conditions: (a) heating rate of 1.8 C min1 from room temperature to 350 C; (b) heating rate of 1.5 C min1 from 350 C to 700 C and (c) cooling rate of 4 C min1 from 700 C to room temperature, to avoid cracking of the barium titanate, which is the shell in the nanostructures and is expected to be subjected to high stresses. One additional sample without ferrofluid was also prepared as a reference (sample BTO). All samples were washed with a 0.1 M acetic acid solution to dissolve impurities such as barium carbonate [18]. We note that if the stearic acid, glacial acetic acid and 2-methoxyethanol were omitted from the preparation, the resulting material consisted of a simple mixture of individual cobalt ferrite and barium titanate nanoparticles. |
回复此楼» 猜你喜欢
澳大利亚 Murdoch University 全奖博士招生（3个名额）地质化工冶金领域
已经有5人回复
-
欢迎发来filecode的Mz6后的代码验证其规律
已经有6人回复
-
不应该看fileCode
已经有9人回复
-
Filecode 又变了，巨变
已经有4人回复
-
分享一下我之前已中青C的计划书的filecode
已经有5人回复
-
FileCode能看出啥？
已经有26人回复
-
关于Filecode分析方法
已经有11人回复
-
重要来源：本周末出结果
已经有9人回复
-
我的国基提前知道中了，可是同事的操作让我实在接受不了，怎么会有这样的人
已经有14人回复
-
结合人工智能，周易传统文化，filecode打分制来了，3分以上希望很大。
已经有4人回复
» 抢金币啦！回帖就可以得到:
-
2026年生物学、大数据与信息工程国际会议 (BSBIE 2026)
+1/600
-
真诚找女友
+1/186
-
毛细管流变仪，DSC, 力学性能，注塑、挤出、平板硫化机等成型与测试
+1/88
-
中国科学院空天院精密干涉测量团队 精密机械结构工程师招聘启事
+1/86
-
威格科技：为化学合成打造全流程惰性气氛解决方案
+1/85
-
中国科学院空天院精密干涉测量团队 精密机械结构工程师招聘启事
+1/84
-
中国科学技术大学-苏州国家实验室联培招生-本科直博/硕博连读/申请考核三种方式
+1/79
-
香港理工大学PhD/RA/PostDoc in OR/AI/OM
+1/79
-
广东医科大学博士后招聘-基础医学，生信等方向
+1/38
-
天津大学环境学院童银栋教授招收博士后（生源要素循环/温室效应/新污染物方向）
+1/30
-
浙江大学医学院附属第一医院招聘科研助理
+1/11
-
深圳理工大学招收生物医用高分子材料方向客座研究生
+1/6
-
中山大学李国强课题组招收博士生（柔性电子方向）
+1/4
-
中山大学计算数学方向招2027届考核制博士生
+1/3
-
国家级人才团队诚聘生物信息相关专业的科研助理
+1/3
-
中国科学技术大学环境学院招聘招生
+1/2
-
中科院理化所热声热机团队招聘电气工程专业(电机方向)博士后/特别研究助理
+1/2
-
请大家抽空欣赏一下我们网站的配图
+1/1
-
北京理工大学-集成电路与电子学院杰青团队-招博士后
+1/1
-
说同济非升即走那是毛毛雨，青岛理工大学（原青岛建工学院）那才叫变态非升即走呢！
+1/1
2楼2011-02-12 21:33:29
3楼2011-02-12 21:34:37
4楼2011-02-12 21:53:23
5楼2011-02-13 07:57:57
6楼2011-02-13 08:52:50
|
其实主要只有一段话不明白，During this process, the nanoparticles were transferred from the aqueous phase to the organic phase, thus forming the ferrofluid. Prior to its collection, the ferrofluid was washed with distilled water in a separatory funnel to remove the non-modified particles. Prior to its collection不知道指的是什么，前后的逻辑关系不是很明白，其他的我还是能看明白的。第一次求助翻译，不知道多少金币翻译多少字合适，我想既然求助了，就粘过来了 |
7楼2011-02-13 09:24:55
lidan0123(金币+5, 翻译EPI+1): 2011-02-14 08:18:13
lidan0123(金币+5): 2011-02-14 08:19:00
lidan0123(金币+5): 2011-02-14 08:19:00
|
指纳米磁流体收集前！ During this process, the nanoparticles were transferred from the aqueous phase to the organic phase, thus forming the ferrofluid. Prior to its collection, the ferrofluid was washed with distilled water in a separatory funnel to remove the non-modified particles. 在此过程中，纳米粒由水相转入有机相，形成纳米磁流体。在纳米磁流体收集前，在分液漏斗中用蒸馏水进行清洗除去未磁化的纳米粒！ |
8楼2011-02-13 17:47:01
