| 查看: 1179 | 回复: 7 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
[交流]
关于化学实验的翻译求助
|
|||
|
2.1. Synthesis of cobalt ferriteCoFe2O4 (sample CFO) was synthesized by chemical coprecipitationby the following procedure. A 0.2 M solutionwas prepared by dissolving Co(NO3)26H2O (A.C.S.reagent, Aldrich) and Fe(NO3)39H2O (puriss, Fluka) in deionized water. The precipitating agent was a 5 M NaOH(reagent grade, Aldrich) solution with 100% molar excess. Both solutions were heated separately to 65 C and thenmixed under constant stirring. The temperature was raised to 80 C for 20 min, to completely crystallize the spinel phase. The precipitate was centrifuged and thoroughly washed with distilled water. The cobalt ferrite was kept in a water suspension. One small portion was dried at 80 C for characterization. 2.2. Preparation of a ferrofluid The cobalt ferrite/water suspension was heated to 80 C under gentle stirring. Oleic acid (reagent grade, Sigma– Aldrich) was added to the suspension at 30 wt.% with respect to the cobalt ferrite. The temperature was raised to 90 C for 30 min and then cooled to 60 C. Octane (reagent grade, Sigma–Aldrich) was added and the mixture was stirred for another 30 min. During this process, the nanoparticles were transferred from the aqueous phase to the organic phase, thus forming the ferrofluid. Prior to its collection, the ferrofluid was washed with distilled water in a separatory funnel to remove the non-modified particles. A gravimetric study of a 2.5 g aliquot was carried out to determine the content of inorganic material in the ferrofluid by weight difference before and after calcination at 700 C. A sample of the surface-modified ferrite was reserved before the addition of octane to determine the amount of oleic acid that reacted with the particles. The sample was dried at 80 C before performing a thermogravimetric analysis on a TGA Q500 by TA Instruments, from room temperature to 700 C at 5 min1. 2.3. Synthesis of cobalt ferrite–barium titanate core–shelltype nanostructures Core–shell-like nanostructures of CoFe2O4–BaTiO3 were synthesized by the sol–gel technique. Ba(C2H3O2)2 (A.C.S. reagent, Sigma–Aldrich) was mixed with titanium (IV) n-butoxide (reagent grade, Sigma–Aldrich), stearic acid (95%, Sigma–Aldrich) and glacial acetic acid (Aldrich) at 90 C to form a sol. The ferrofluid was added to the sol at an adequate amount so that the final nanostructures have a content of 20, 30, 40, 50 and 60 wt.% of cobalt ferrite with respect to the barium titanate, namely samples Co20, Co30, Co40, Co50 and Co60, respectively. Anhydrous 2-methoxyethanol (Aldrich) was added to promote the gel formation. The obtained gels were dried overnight at 80 C and sintered at 700 C for 2 h under the following conditions: (a) heating rate of 1.8 C min1 from room temperature to 350 C; (b) heating rate of 1.5 C min1 from 350 C to 700 C and (c) cooling rate of 4 C min1 from 700 C to room temperature, to avoid cracking of the barium titanate, which is the shell in the nanostructures and is expected to be subjected to high stresses. One additional sample without ferrofluid was also prepared as a reference (sample BTO). All samples were washed with a 0.1 M acetic acid solution to dissolve impurities such as barium carbonate [18]. We note that if the stearic acid, glacial acetic acid and 2-methoxyethanol were omitted from the preparation, the resulting material consisted of a simple mixture of individual cobalt ferrite and barium titanate nanoparticles. |
回复此楼» 猜你喜欢
售SCI一区T0P文章，我:8O.55.1.O.5.4,科目齐全,可+急
已经有3人回复
-
售SCI文章，我:8O5.5.1.O.54,科目齐全,可+急
已经有3人回复
-
售SCI一区T0P文章，我:8.O55.1.O.54,科目全,可十急
已经有3人回复
-
售SCI一区T0P文章，我:8.O55.1.O.54,科目全,可十急
已经有9人回复
-
说走就走，走到哪便是哪
已经有10人回复
-
亲密关系
已经有13人回复
-
27秋申博自荐
已经有4人回复
-
郑州大学申博
已经有8人回复
» 抢金币啦！回帖就可以得到:
-
安徽工程大学徐珍珍课题组招聘博士后
+1/380
-
澳门大学智慧城市物联网国重“基础设施智能监测”及“智慧城市”研究方向博士后招聘
+1/186
-
澳门大学智慧城市物联网国重”基础设施智能监测“及”智慧城市“研究方向博士生招生
+1/183
-
经济危机不是生产过剩
+1/135
-
92年男生，身高179，体重73公斤，老家西安，985本科毕业，外企
+1/112
-
热分析测试
+1/86
-
南开大学环境科学与工程学院 环境与人体健康方向 招博士研究生、硕士研究生各1名
+1/75
-
中国科学院大学陈凯凯课题组招收2027级博士生
+2/44
-
华南师范大学（211）- 光电科学与工程学院招收物理学（一流学科）2027级博士
+1/44
-
Claudin-2 重组蛋白来啦
+1/41
-
华南理工大学黄哲昊课题组招收博士研究生
+2/40
-
香港城市大学（东莞）雷进程课题组博士研究生、研究助理招聘
+1/38
-
郑州招聘博士
+1/35
-
澳大利亚皇家墨尔本理工招收phd
+1/32
-
电子科技大学（深圳）高等研究院Beng Hau Tan 课题组现面向海内外公开招聘多名博士后
+1/32
-
中国科学院精密测量院招收2027级博士（冷冻电镜、生化和核磁共振方向）
+1/30
-
北京化工大学杨琪教授 邱介山教授，招收博士1-2名，2027年秋季入学
+1/29
-
华南理工大学 郎超课题组 招收2027级博士研究生
+1/28
-
社科后期
+1/5
-
【细胞生物学/衰老】中国科学院大学-郭玉婷课题组招收博士研究生
+1/1
2楼2011-02-12 21:33:29
3楼2011-02-12 21:34:37
4楼2011-02-12 21:53:23
5楼2011-02-13 07:57:57
6楼2011-02-13 08:52:50
|
其实主要只有一段话不明白，During this process, the nanoparticles were transferred from the aqueous phase to the organic phase, thus forming the ferrofluid. Prior to its collection, the ferrofluid was washed with distilled water in a separatory funnel to remove the non-modified particles. Prior to its collection不知道指的是什么，前后的逻辑关系不是很明白，其他的我还是能看明白的。第一次求助翻译，不知道多少金币翻译多少字合适，我想既然求助了，就粘过来了 |
7楼2011-02-13 09:24:55
lidan0123(金币+5, 翻译EPI+1): 2011-02-14 08:18:13
lidan0123(金币+5): 2011-02-14 08:19:00
lidan0123(金币+5): 2011-02-14 08:19:00
|
指纳米磁流体收集前！ During this process, the nanoparticles were transferred from the aqueous phase to the organic phase, thus forming the ferrofluid. Prior to its collection, the ferrofluid was washed with distilled water in a separatory funnel to remove the non-modified particles. 在此过程中，纳米粒由水相转入有机相，形成纳米磁流体。在纳米磁流体收集前，在分液漏斗中用蒸馏水进行清洗除去未磁化的纳米粒！ |
8楼2011-02-13 17:47:01