| 查看: 1044 | 回复: 7 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
[交流]
求摘要翻译(12月15日晚21点前)
|
|||
|
A 1-D Infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the Infiltration flow front position as a function of time. The model also predicts the final panel thickness, fiber volume fraction, and resin mass for full saturation as a function of compaction pressure. Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total Infiltration times by a factor of 2.NTIS controlled terms: Composite materials - Composite structures - Epoxy resins - Fabrics - Forming techniques - Temperature distribution - Casting - Compacting - Infiltration - Permeability - Preforms - Simulation - Time [ Last edited by 科学狂牛 on 2010-12-15 at 14:28 ] |
回复此楼» 猜你喜欢
材料工程专硕求调剂
已经有5人回复
-
296求调剂
已经有10人回复
-
332求调剂
已经有5人回复
-
318求调剂
已经有7人回复
-
求调剂 有机化学考研356分
已经有10人回复
-
279求调剂
已经有5人回复
-
283求调剂（080500）
已经有12人回复
-
考研调剂
已经有4人回复
-
300求调剂，材料科学英一数二
已经有14人回复
-
化学308分调剂
已经有6人回复
» 抢金币啦！回帖就可以得到:
-
南方科技大学纳米-飞秒-超快动力学课题组---诚聘博士后/助理研究员
+1/188
-
多通道数据采集/线性功率放大器租赁｜自动化控制实验
+1/94
-
广东医科大学 陈胜昔教授团队（国家级人才；AI医药创新研发平台）高薪聘请博士后
+1/87
-
[b]【材料表征】成分含量丨微观形貌丨分子结构丨材料加工丨预存服务[/b]
+1/71
-
坐标广州，征女友
+2/44
-
招收2名土木工程方向硕士研究生
+1/37
-
重庆大学李延军课题组招聘有机方向科研助理
+1/35
-
【分享】招收08工学硕士（要求过国家线）
+1/34
-
济南大学水利与环境学院赵艳侠教授简介
+1/27
-
【哈工程】核学院某课题组招收全日制调剂研究生
+1/19
-
西南科技大学李永升老师接收材料和化工类研究生调剂
+1/18
-
三峡大学材化学院能源环保晶态材料课题组接收调剂，招收化学类硕士
+1/8
-
【博士招生】广东工业大学国家优青课题组招收2026年环境方向博士生
+1/7
-
三峡大学材料与化工学院调剂
+1/7
-
欢迎各位同学申请参加澳门大学健康科学学院的2026年夏令营，报名截止4月12号
+1/4
-
浙江农林大学光学工程调剂
+1/4
-
各种IgG抗体表达系统
+1/3
-
福建师范大学国家级人才团队招收2026年博士研究生
+1/3
-
基于机器学习和人工智能的结构/合金设计-西安交大
+1/3
-
岭南大学（香港）诚招Research Talent Hub人才（创新及科技基金研究人才库）
+1/1
2楼2010-12-15 19:16:22
|
The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the Infiltration flow front position as a function of time。 模拟模型与实际温度和处理循环的压力有关，并且与织物预成型的实验测量的凝结和渗透性能联系起来，包括温度分布，树脂凝固与粘度，以及前端随时间变化的渗透流等因素。 |
3楼2010-12-15 19:32:54
4楼2010-12-15 19:33:54
5楼2010-12-15 19:41:24
|
Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total Infiltration times by a factor of 2. 制备复合板使用针织，针织/缝合和RTM（树脂传递成型）膜渗透技术的两维机织碳纤维预成品及Hercules 3501-6树脂。在不同压制压力和温度循环时制作了织物复合材料，以确定对性能的处理效果。该复合材料进行C-扫描和进行显微观察以确定每个面板的质量。从RTM仿真模型中得到优异的凝固周期，被用来减少3倍的凝固周期，总渗透周期减少2倍。 |
6楼2010-12-15 19:54:17
科学狂牛(金币+20, 翻译EPI+1):非常感谢 2010-12-17 07:58:19
|
Composite materials - Composite structures - Epoxy resins - Fabrics - Forming techniques - Temperature distribution - Casting - Compacting - Infiltration - Permeability - Preforms - Simulation - Time 复合材料 -复合材料结构 -环氧树脂- 布料- 成型技术- 温度分布- -铸造-充填-渗透 -渗透性-预制- 仿真-时间 翻译完毕！！ |
7楼2010-12-15 19:56:47
8楼2010-12-17 08:00:28
