| 查看: 1223 | 回复: 7 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
[交流]
求摘要翻译(12月15日晚21点前)
|
|||
|
A 1-D Infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the Infiltration flow front position as a function of time. The model also predicts the final panel thickness, fiber volume fraction, and resin mass for full saturation as a function of compaction pressure. Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total Infiltration times by a factor of 2.NTIS controlled terms: Composite materials - Composite structures - Epoxy resins - Fabrics - Forming techniques - Temperature distribution - Casting - Compacting - Infiltration - Permeability - Preforms - Simulation - Time [ Last edited by 科学狂牛 on 2010-12-15 at 14:28 ] |
回复此楼» 猜你喜欢
欢迎发来filecode的Mz6后的代码验证其规律
已经有69人回复
-
有时候，自然基金真的不能太认真 （我的申报经验）
已经有11人回复
-
时间戳又变了8-15
已经有23人回复
-
filecode=后面第一个是大写字母
已经有7人回复
-
filecode
已经有12人回复
-
小木虫上这么多卖论文的，真有人买论文么？感觉没必要啊
已经有13人回复
-
哪位老哥知道今年的国自然具体哪一天放榜？
已经有7人回复
-
关于Filecode分析方法
已经有13人回复
-
各位道友，我要去昆明玩几天，回来见。
已经有8人回复
-
咱们一起用铁证分析2026国家社科基金中标与否
已经有22人回复
» 抢金币啦！回帖就可以得到:
-
西安交大马伟/王亚洲课题组诚聘联培博士和硕士学生多名-有机生物电子学方向
+1/185
-
原创销售写了20年终于完结发表
+1/163
-
上海同城
+1/124
-
上海男征女 条件优秀可加微信联系
+1/105
-
2026年生物学、大数据与信息工程国际会议 (BSBIE 2026)
+1/95
-
东南大学杰青/海优团队招聘催化方向博士后
+1/81
-
中国科大-合肥国家实验室冷原子量子网络团队招聘启事
+2/56
-
广东医科大学博士后招聘-基础医学，生信等方向
+1/38
-
加拿大/英属哥伦比亚大学曹彦凯课题组招收全奖博士/博后 [机器人/控制方向]
+1/36
-
祈福！
+1/29
-
西北工业大学 生科院 秦绪军课题组诚招博士后、博士/硕士研究生【长期有效】
+1/13
-
论文祈福
+1/10
-
关于Ghaffar-Parkins催化剂催化氰基水解为酰胺的问题
+1/6
-
27推免-广州医科大学封红亮教授招收精神医学应用心理学推免生
+1/5
-
祈福今年中标教育部和省社科都中标，为退休倒计时画上圆满的句号
+1/5
-
中山大学国家级青年人才课题组招收推免硕士2名（2027年入学）
+2/4
-
UTS 招收2027年入学博士生
+1/3
-
中国科学技术大学环境学院招聘招生
+1/2
-
悉尼科技大学（QS 第87）数据科学/AI招收2027年秋季入学全奖及CSC博士生
+1/1
-
中科院理化所热声热机团队招聘电气工程专业(电机方向)博士后/特别研究助理
+1/1
2楼2010-12-15 19:16:22
|
The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the Infiltration flow front position as a function of time。 模拟模型与实际温度和处理循环的压力有关，并且与织物预成型的实验测量的凝结和渗透性能联系起来，包括温度分布，树脂凝固与粘度，以及前端随时间变化的渗透流等因素。 |
3楼2010-12-15 19:32:54
4楼2010-12-15 19:33:54
5楼2010-12-15 19:41:24
|
Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total Infiltration times by a factor of 2. 制备复合板使用针织，针织/缝合和RTM（树脂传递成型）膜渗透技术的两维机织碳纤维预成品及Hercules 3501-6树脂。在不同压制压力和温度循环时制作了织物复合材料，以确定对性能的处理效果。该复合材料进行C-扫描和进行显微观察以确定每个面板的质量。从RTM仿真模型中得到优异的凝固周期，被用来减少3倍的凝固周期，总渗透周期减少2倍。 |
6楼2010-12-15 19:54:17
科学狂牛(金币+20, 翻译EPI+1):非常感谢 2010-12-17 07:58:19
|
Composite materials - Composite structures - Epoxy resins - Fabrics - Forming techniques - Temperature distribution - Casting - Compacting - Infiltration - Permeability - Preforms - Simulation - Time 复合材料 -复合材料结构 -环氧树脂- 布料- 成型技术- 温度分布- -铸造-充填-渗透 -渗透性-预制- 仿真-时间 翻译完毕！！ |
7楼2010-12-15 19:56:47
8楼2010-12-17 08:00:28
