24小时热门版块排行榜

返回列表

本帖产生 1 个翻译EPI ，点击这里进行查看

当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖

科学狂牛

木虫 (著名写手)

应助: 1 (幼儿园)
金币: 1189.5
帖子: 1113
在线: 80小时
虫号: 769582

[交流] 求摘要翻译(12月15日晚21点前)

A 1-D Infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the Infiltration flow front position as a function of time. The model also predicts the final panel thickness, fiber volume fraction, and resin mass for full saturation as a function of compaction pressure. Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total Infiltration times by a factor of 2.NTIS controlled terms: Composite materials - Composite structures - Epoxy resins - Fabrics - Forming techniques - Temperature distribution - Casting - Compacting - Infiltration - Permeability - Preforms - Simulation - Time

[ Last edited by 科学狂牛 on 2010-12-15 at 14:28 ]

回复此楼

» 猜你喜欢

» 抢金币啦！回帖就可以得到:

查看全部散金贴

1楼 2010-12-15 14:26:38

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

gary8812

铁杆木虫 (著名写手)

科学狂牛(金币+20, 翻译EPI+1):非常感谢 2010-12-17 07:58:19

Composite materials - Composite structures - Epoxy resins - Fabrics - Forming techniques - Temperature distribution - Casting - Compacting - Infiltration - Permeability - Preforms - Simulation - Time

复合材料 -复合材料结构 -环氧树脂- 布料- 成型技术- 温度分布- -铸造-充填-渗透 -渗透性-预制- 仿真-时间

翻译完毕！！

赞一下

回复此楼

7楼2010-12-15 19:56:47

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

查看全部 8 个回答

gary8812

铁杆木虫 (著名写手)

A 1-D Infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process.
发展了一个一维渗透/凝固模型，用以模拟通过树脂薄膜注入工序进行的先进纺织复合材料的制造。

赞一下

回复此楼

2楼2010-12-15 19:16:22

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

gary8812

铁杆木虫 (著名写手)

The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the Infiltration flow front position as a function of time。
模拟模型与实际温度和处理循环的压力有关，并且与织物预成型的实验测量的凝结和渗透性能联系起来，包括温度分布，树脂凝固与粘度，以及前端随时间变化的渗透流等因素。

赞一下

回复此楼

3楼2010-12-15 19:32:54

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖