| 查看: 733 | 回复: 2 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
89333627金虫 (小有名气)
|
[求助]
帮忙检查、润色段话。
|
||
|
请高手帮忙检查、润色我的英文表达（四段）。非常感谢。 In order to improve the adhesion property between the A and B, we developed the carbon fibre powder coating technique for A. Four types of coating materials, *1, *2, *3 and *4, were coated on an impregnated fibre bundle before the curing of the A. The diameters of the four types of coated A were increased from 0.50mm to 0.61mm, 0.57mm, 0.58mm and 0.54mm, correspondingly separately. It should be noted that in the tests, the displacements recorded by the testing machine also included the deformations of the B and the 10 mm-long-free A. The separate tensile tests on the A and finite-element simulation on the B were done to measure their load–deformation curves. The pull-out energy, Et corresponds to the area beneath the pull-out curve, in which the deformation of the 10 mm-long-free A and B has been took away. For ** technique in this study, we used a stainless steel needle to assist the insertion of the A. First, the needle griped by a mechanical device orthogonally pierced into the B to create a through-hole. Then, a 3mm-lomg A held by a tweezer was implanted into the B along the path of the hole manually. At the same time, coatings enlarged the diameters of the A to varying degrees according to the different particle morphology. Table 1 shows the diameters of various A. |
回复此楼» 猜你喜欢
实验室接单子
已经有7人回复
-
假如你的研究生提出不合理要求
已经有11人回复
-
全日制（定向）博士
已经有5人回复
-
萌生出自己或许不适合搞科研的想法，现在跑or等等看？
已经有4人回复
-
Materials Today Chemistry审稿周期
已经有4人回复
-
参与限项
已经有3人回复
-
对氯苯硼酸纯化
已经有3人回复
-
求助:我三月中下旬出站，青基依托单位怎么办？
已经有12人回复
-
所感
已经有4人回复
-
要不要辞职读博？
已经有7人回复
ssssllllnnnn 
至尊木虫 (知名作家)
Translator and Proofreader
- 翻译EPI: 1690
- 应助: 452 (硕士)
- 金币: 31580.9
- 红花: 100
- 帖子: 7681
- 在线: 19966.6小时
- 虫号: 3328089
- 注册: 2014-07-17
- 专业: 肿瘤发生
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
89333627: 金币+50, 翻译EPI+1, ★★★★★最佳答案 2015-03-16 14:17:11
89333627: 金币+50, 翻译EPI+1, ★★★★★最佳答案 2015-03-16 14:17:11
|
In order to improve the adhesion property (between) 【通常用of，不知这里为何用between】 the A and B, we developed the carbon fibre powder coating technique for A. Four types of coating materials, *1, *2, *3 and *4, were coated on an impregnated fibre bundle before the curing of the A. The diameters of the four types of coated A were increased from 0.50mm to 0.61mm, 0.57mm, 0.58mm and 0.54mm, 【简单的用respectively就可以了】 (correspondingly separately). It should be noted that in the tests, the displacements recorded by the testing machine also included the deformations of the B and the 10 mm-long-free A. The separate tensile tests on the A and finite-element simulation on the B were done to measure their load–deformation curves. The pull-out energy, Et 【Et是指pull-out energy吧，可在其后加个逗号】 corresponds to the area beneath【也可用under】 the pull-out curve, in which the deformation of the 10 mm-long-free A and B has been took【应该是taken】 away. For ** technique in this study, we used a stainless steel needle to assist the insertion of the A. First, the needle griped by a mechanical device orthogonally pierced into the B to create a through-hole. Then, a 3mm-lomg【long】 A held by a tweezer was implanted 【manually放这里更好】 into the B along the path of the hole (manually). At the same time, coatings enlarged the diameters of the A to varying degrees according to the different particle morphology. Table 1 shows the diameters of various A. |
2楼2015-03-13 21:25:52
genhunter
至尊木虫 (著名写手)
- 翻译EPI: 387
- 应助: 259 (大学生)
- 金币: 9757.4
- 散金: 10
- 红花: 60
- 帖子: 2484
- 在线: 1793小时
- 虫号: 2558361
- 注册: 2013-07-22
- 专业: 肿瘤化学药物治疗
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
89333627: 金币+50, ★★★★★最佳答案 2015-03-16 14:17:18
89333627: 金币+50, ★★★★★最佳答案 2015-03-16 14:17:18
|
In order to improve the adhesion between the A and B, we developed a carbon fibre powder coating technique and applied it to A. Four types of coating materials, *1, *2, *3 and *4, were coated on an impregnated fibre bundle before the curing of A. The diameters of the four types of coated A were increased from 0.50mm to 0.61mm, 0.57mm, 0.58mm and 0.54mm, correspondingly. It should be noted that in the tests, the displacements recorded by the testing machine also included the deformations of B and free A (10 mm in length). The separate tensile tests on A and finite-element simulation on B were performed to establish load–deformation curves. The pull-out energy (Et) corresponds to the area beneath the pull-out curve, in which the deformation of free A(10 mm in length) and B was deducted. For ** technique developed in this study, we used a stainless steel needle to assist the insertion of A. First, a needle griped by a mechanical device pierced through B to create a perpendicular hole(s?). Then, a A of 3 mm in length was manually implanted into a piece of B through hole(s?) with the help of a tweezer . At the same time, the diameters of A were increased to varoius degree according to the particles used that had different morphologies. Table 1 shows the diameters of various A. |
3楼2015-03-14 08:54:49