至尊木虫 (知名作家)
Translator and Proofreader
|
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
89333627: 金币+50, 翻译EPI+1, ★★★★★最佳答案 2015-03-16 14:17:11
In order to improve the adhesion property (between) 【通常用of，不知这里为何用between】 the A and B, we developed the carbon fibre powder coating technique for A. Four types of coating materials, *1, *2, *3 and *4, were coated on an impregnated fibre bundle before the curing of the A. The diameters of the four types of coated A were increased from 0.50mm to 0.61mm, 0.57mm, 0.58mm and 0.54mm, 【简单的用respectively就可以了】 (correspondingly separately).
It should be noted that in the tests, the displacements recorded by the testing machine also included the deformations of the B and the 10 mm-long-free A. The separate tensile tests on the A and finite-element simulation on the B were done to measure their load–deformation curves. The pull-out energy, Et 【Et是指pull-out energy吧，可在其后加个逗号】 corresponds to the area beneath【也可用under】 the pull-out curve, in which the deformation of the 10 mm-long-free A and B has been took【应该是taken】 away.
For ** technique in this study, we used a stainless steel needle to assist the insertion of the A. First, the needle griped by a mechanical device orthogonally pierced into the B to create a through-hole. Then, a 3mm-lomg【long】 A held by a tweezer was implanted 【manually放这里更好】 into the B along the path of the hole (manually).
At the same time, coatings enlarged the diameters of the A to varying degrees according to the different particle morphology. Table 1 shows the diameters of various A. |
|
回复此楼