24小时热门版块排行榜    

CyRhmU.jpeg
查看: 755  |  回复: 3

mynameisyzq

新虫 (小有名气)

[求助] 求翻译AWS D3.6中的2段话已有2人参与

1、surface condition of the material shall be such that an adequate examination of the weld can be made with the pertinent examination method.
2、the specimen shall pass if it bends flat upon itself. if the fillet weld fractures, it shall show fusion to the root of the joint but not necessarily beyond. the fracture shall exhibit no inclusion or porosity greater than 2.5mm in the greatest dimension. the sum of the greatest dimensions of all inclusions and porosity shall not exceed 10 mm in any 150mm  of weld.
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wjguomas

新虫 (初入文坛)

材料的表面状态应保证焊缝可用相应的检查方法进行适当检查
2楼2014-12-24 21:57:34
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

沉沦不了情

木虫 (正式写手)

JIN CHONG

【答案】应助回帖

★ ★ ★ ★ ★ ★ ★ ★ ★ ★
感谢参与,应助指数 +1
mynameisyzq: 金币+5, 有帮助, 谢谢热心答复 2014-12-26 16:51:56
mynameisyzq: 金币+5 2014-12-26 16:52:14
试样应通过,如果它弯曲扁平自行承担。如果该角焊缝骨折,应当显示融合到接头的根,但不一定超越。骨折应表现出的最大尺寸不含有或孔隙比为2.5mm。所有的夹杂物和孔隙度的最大尺寸的总和不得超过10毫米的焊缝任何150毫米。仅供参考
机遇总是垂青于有准备的人。。。
3楼2014-12-24 22:06:21
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wjguomas

新虫 (初入文坛)

【答案】应助回帖

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
感谢参与,应助指数 +1
mynameisyzq: 金币+25, 有帮助, 谢谢热心答复 2014-12-26 16:51:28
发生弯曲而变成扁平状的试样应被通过。角焊缝的破裂表面必须呈现焊缝熔合至根部,但无需超过。破裂严禁有与母材不完全熔合的情况或任何最大尺寸超过2.5mm 的夹渣或气孔。150mm焊缝中所有夹渣和气孔的最大尺寸总和不能超过10mm。
4楼2014-12-24 22:19:25
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 mynameisyzq 的主题更新
信息提示
请填处理意见