24小时热门版块排行榜    

查看: 2325  |  回复: 2

DCL-TBC

新虫 (小有名气)

[求助] 老问题:Acta materialia 拒稿 是否可以重投 已有2人参与

年前投了一篇文章到Acta materialia, 一个半月后给出了审稿意见,6个comments,对文章审稿人有所保留,编辑给了拒稿
我心里有些不甘,审稿人的意见大致如下,意见是非常的好,而且我也按照意见完善并且扩充了文章,现在相重投不知道是怎么样一个流程
是不是先要给主编写一封信?还是直接按照新稿去投递。
小弟心里焦躁,为了这篇文章年没过好,一直不停的在调研、整理、写。
还恳求各位给点建议

This manuscript reports stress modeling for a xxx. The authors tried to explain the experimental results reported by xx. that the failure location shifts from the interface between the two ceramic layers to the boundary between the bond coating and the YSZ layer as the thickness of the YSZ layer increased while the total thickness of the two ceramic top coatings were kept constant at 300 microns. By using a commercial FEM software, they developed an axisymmetric model with periodically modulated interfaces and a growing layer of TGO. The main conclusions are 1) if the YSZ coating is too thin, then the top LZ7C3 layer spalls due to its thermal expansion mismatch, and if the premature failure is avoided by sufficiently thick YSZ layer, then the conventional mode of failure due to the TGO growth prevails. It deals with a problem of great industrial importance with reasonable approach but there are several major problems.

comments: (1)xxx
....(6) 总共6个建议,其中有两个是非常要紧的,但都很好回答。主要是讨论不给深入,有些讨论和结论有点问题
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐,对您同样有帮助:

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

寻找cock

至尊木虫 (文坛精英)

【答案】应助回帖

感谢参与,应助指数 +1
编辑不是已经给你拒了么,所以你重新按照新投稿的步骤来就行
2楼2014-02-12 16:50:35
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

yangwg8088

铜虫 (著名写手)

【答案】应助回帖

感谢参与,应助指数 +1
还是换个投吧。毕竟已经被据,而不是修改再投。再投可能惹恼编辑。

[ 发自手机版 http://muchong.com/3g ]
3楼2014-02-12 18:15:42
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 DCL-TBC 的主题更新
信息提示
请填处理意见