24小时热门版块排行榜

返回列表

当前主题已经存档。

【悬赏金币】回答本帖问题，作者guojinming将赠送您 5 个金币

guojinming

金虫 (正式写手)

应助: 1 (幼儿园)
金币: 971.7
散金: 130
红花: 3
帖子: 467
在线: 136.8小时
虫号: 48426
注册: 2004-06-19
性别: GG
专业: 有机高分子材料

[求助] 帮我翻译几句话,谢谢

2. CAVITY WALL CONSTRUCTION
Cavity wall construction to be executed in the following areas, as per drawings: Production building, technical/ energy building.
The cavity wall construction for the exterior walls has to be executed in aluminum-trapezoidal sheet metal, thickness= 1mm. The wave profile dimensions can be requested via the Project Management and measured on a sample sheet metal during clarification meeting.
Brand/ product for Aluminum Panels/ Boards/ Metal Sheeting:
(please refer to Technical Schedule-Architecture for further details):
Corus or Thyssen Krupp
Brand/ product for Mechanical screws, anchors and curtain wall fixation:
(please refer to Technical Schedule-Architecture for further details):
Fischer
Insulation material to be executed as: pressed panels, thickness = according to heat-insulation-calculation, but has to fulfill minimum thermal resistance of 0.40, meaning = minimum thickness 14cm, rigid material, with moisture proof layer.
Brand/ product for Insulation material:
(please refer to Technical Schedule-Architecture for further details):
Rockwool (Roxul)
Insulation material to be screwed on to distance-profiles, including all fittings, weather groove/ plate with lug pattern/ window drip, corner angle-metal sheets/ corner-surrounding metal-sheets, window- and door-corner metal-sheets. All corner sheeting has to be without butt joints. The aluminum-trapezoidal sheet metal has to have a finished top-coating, color: RAL 1002 – sand yellow. PVDF coated (thickness =min 45 μm). All visible elements with PVDF coating.
The external sun-louvers have to be considered when mounting the external façade panels.
The internal horizontal steel panels to be continuously galvanized on both sides, thickness= 1mm, including a PVDF plastic-coating RAL 9002 (thickness =min 25 μm), mounted on continuously galvanized Z-shaped distance-profiles of a minimum thickness= 1,25mm, including a vapor-permeable foil layer which has to be applied over the total insulation area.
Façade panels to be executed as cross joints (overlapping), the building corners to be executed positive.

回复此楼