| 查看: 472 | 回复: 1 | ||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | ||
euying木虫 (小有名气)
|
[求助]
求助汉译英,专业术语可用中文代替
|
|
|
卫生陶瓷产品一般都用注浆的方法成形。传统的注浆方法是将泥浆注入模具中，借助模具的毛细管吸力，把泥浆中的一部分水脱出从而形成坯体。为了提高成形速率，高压注浆成形工艺应运而生。随着生产的发展，高压注浆过程中的操作压力不断升高，甚至达到了20 MPa。注浆过程中泥浆颗粒运动到模具工作面，并依次沉积，形成一定强度的坯体。高压注浆成型工艺的出现，对模具的抗压强度提出了更高的要求。传统的石膏模具表面孔径大、易堵塞，吸水分离性能差，强度低，已经难以满足高压注浆生产的需要。因此研究和开发新的模具材料就显得尤为重要,而抗压强度是决定其适用性的最佳指标。 [ 来自科研家族 快乐家族 ] |
回复此楼» 猜你喜欢
299求调剂
已经有4人回复
-
材料与化工专硕调剂
已经有6人回复
-
086500 325 求调剂
已经有3人回复
-
材料080500调剂求收留
已经有7人回复
-
一志愿南昌大学，327分，材料与化工085600
已经有6人回复
-
环境工程调剂
已经有9人回复
-
工科材料085601 279求调剂
已经有9人回复
-
287求调剂
已经有5人回复
-
22408 344分 求调剂 一志愿 华电计算机技术
已经有3人回复
-
289求调剂
已经有3人回复
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
Carena: 金币+1, 鼓励新虫应助 2012-11-04 19:43:14
euying: 金币+50, 翻译EPI+1, ★有帮助 2012-11-05 09:33:22
Carena: 金币+1, 鼓励新虫应助 2012-11-04 19:43:14
euying: 金币+50, 翻译EPI+1, ★有帮助 2012-11-05 09:33:22
| grouting method forming is usually useed in sanitary ceramics products. The traditional grouting method is to pure mud into the mould,then with the aid of mould capillary suction,the mud is dewated and form the body.In order to improve the forming rate,high pressure injection forming process arises at the historic moment.With the development of production,operating pressure in high pressure injection forming is always rising,almostly reaching 20MPa.Mud particle move to the mold working face and in turn deposit in grouting process,forming a certain intensity of body.The appearance of high pressure grouting molding process request the mold need more higher compressive strength.The traditional gypsum mould have large surface aperture,easily blocked,poor water separation performance and low strength,so it can not meet the needs of the production of the high pressure grouting.Therefor,it is very important to research and development new mould material,and the compressive strength is the best indicators of its applicability. |
2楼2012-11-03 11:05:40
