应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台 » 计算模拟区 » 第一性原理 » Vasp&MedeA » 菜鸟求助 VASP5.2并行安装 出错
81/1返回列表
查看: 1948  |  回复: 7
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看

qlm2001

铁虫 (小有名气)

[求助] 菜鸟求助 VASP5.2并行安装 出错

在其它都准备好后, Makefile编辑完后，运行make后，出现如下错误


----------------------------------------------------------------------------------------------------
lenovo@lenovo:~/vasp/vasp.5.2$ sudo make
[sudo] password for lenovo:
./preprocess base.f90  -DHOST=\"LinuxIFC\" -Dkind8 -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf
ifort  -FR -lowercase -assume byterecl  -O3  -c base.f90
make: ifort: Command not found
make: *** [base.o] Error 127

-------------------------------------------------------------------------------------------------------------------
希望高人能够帮忙 谢谢了

makefile 如下
======================================================================================
.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron
# bases systems
# we recommend this makefile for both Intel as well as AMD systems
# for AMD based systems appropriate BLAS and fftw libraries are
# however mandatory (whereas they are optional for Intel platforms)
#
# The makefile was tested only under Linux on Intel and AMD platforms
# the following compiler versions have been tested:
#  - ifc.7.1  works stable somewhat slow but reliably
#  - ifc.8.1  fails to compile the code properly
#  - ifc.9.1  recommended (both for 32 and 64 bit)
#  - ifc.10.1 partially recommended (both for 32 and 64 bit)
#             tested build 20080312 Package ID: l_fc_p_10.1.015
#             the gamma only mpi version can not be compiles
#             using ifc.10.1
#
# it might be required to change some of library pathes, since
# LINUX installation vary a lot
# Hence check ***ALL*** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
#   retrieve the lapackage from ftp.netlib.org
#   and compile the blas routines (BLAS/SRC directory)
#   please use g77 or f77 for the compilation. When I tried to
#   use pgf77 or pgf90 for BLAS, VASP hang up when calling
#   ZHEEV  (however this was with lapack 1.1 now I use lapack 2.0)
# 2) more desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)
#     http://developer.intel.com/software/products/mkl/
#   this is really excellent, if you use Intel CPU's
#
# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,
#     around 30 GFlops on Quad core)
#   Kazushige Goto's BLAS
#   http://www.cs.utexas.edu/users/kgoto/signup_first.html
#   http://www.tacc.utexas.edu/resources/software/
#
#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f90
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=ifort
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
#  CPP_   =  /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
#  CPP_   =  /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
#  SUSE X.X, maybe some Red Hat distributions:

CPP_ =  ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf             charge density   reduced in X direction
# wNGXhalf            gamma point only reduced in X direction
# avoidalloc          avoid ALLOCATE if possible
# PGF90               work around some for some PGF90 / IFC bugs
# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)
#-----------------------------------------------------------------------

CPP     = $(CPP_)  -DHOST=\"LinuxIFC\" \
          -Dkind8 -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \
#          -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# general fortran flags  (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------

FFLAGS =  -FR -lowercase -assume byterecl

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK  SSE1 optimization,  but also generate code executable on all mach.
#       xK improves performance somewhat on XP, and a is required in order
#       to run the code on older Athlons as well
# -xW   SSE2 optimization
# -axW  SSE2 optimization,  but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------

# ifc.9.1, ifc.10.1 recommended
OFLAG=-O3

OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG  = -FR -O0
INLINE = $(OFLAG)

#-----------------------------------------------------------------------
# the following lines specify the position of BLAS  and LAPACK
# VASP works fastest with the libgoto library
# so that's what we recommend
#-----------------------------------------------------------------------

# mkl.10.0
# set -DRPROMU_DGEMV  -DRACCMU_DGEMV in the CPP lines
#BLAS=-L/opt/intel/mkl100/lib/em64t -lmkl -lpthread

# even faster for VASP Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
# parallel goto version requires sometimes -libverbs
BLAS=  /vasp/vasp.5.2/GotoBLAS2/libgoto2.so

# LAPACK, simplest use vasp.5.lib/lapack_double
LAPACK= ../vasp/vasp.5.lib/lapack_double.o

# use the mkl Intel lapack
#LAPACK= -lmkl_lapack

#-----------------------------------------------------------------------

LIB  = -L../vasp.5.lib -ldmy \
     ../vasp.5.lib/linpack_double.o $(LAPACK) \
     $(BLAS)

# options for linking, nothing is required (usually)
LINK    =

#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------

FFT3D   = fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D   = fftw3d.o fft3dlib.o   /opt/libs/fftw-3.1.2/lib/libfftw3.a


#=======================================================================
# MPI section, uncomment the following lines until
#    general  rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------

#FC=/opt/bin/mpif77
#FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf               charge density   reduced in Z direction
# wNGZhalf              gamma point only reduced in Z direction
# scaLAPACK             use scaLAPACK (usually slower on 100 Mbit Net)
#-----------------------------------------------------------------------

#CPP    = $(CPP_) -DMPI  -DHOST=\"LinuxIFC\" -DIFC \
#     -Dkind8 -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \
#     -DMPI_BLOCK=8000
##    -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave that section commented out
#-----------------------------------------------------------------------

#BLACS=$(HOME)/archives/SCALAPACK/BLACS/
#SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK

#SCA= $(SCA_)/libscalapack.a  \
# $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a

SCA=

#-----------------------------------------------------------------------
# libraries for mpi
#-----------------------------------------------------------------------

#LIB     = -L../vasp.5.lib -ldmy  \
#      ../vasp.5.lib/linpack_double.o $(LAPACK) \
#      $(SCA) $(BLAS)

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
#FFT3D   = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D   = fftmpi.o fftmpi_map.o fftw3d.o fft3dlib.o  /opt/fftw/lib/libfftw3.a

#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC=   symmetry.o symlib.o   lattlib.o  random.o   

SOURCE=  base.o     mpi.o      smart_allocate.o      xml.o  \
         constant.o jacobi.o   main_mpi.o  scala.o   \
         asa.o      lattice.o  poscar.o   ini.o       xclib.o     xclib_grad.o \
         radial.o   pseudo.o   mgrid.o    gridq.o     ebs.o  \
         mkpoints.o wave.o     wave_mpi.o  wave_high.o  \
         $(BASIC)   nonl.o     nonlr.o    nonl_high.o dfast.o    choleski2.o \
         mix.o      hamil.o    xcgrad.o   xcspin.o    potex1.o   potex2.o  \
         metagga.o constrmag.o cl_shift.o relativistic.o LDApU.o \
         paw_base.o egrad.o    pawsym.o   pawfock.o  pawlhf.o    paw.o   \
         mkpoints_full.o       charge.o   dipol.o    pot.o  \
         dos.o      elf.o      tet.o      tetweight.o hamil_rot.o \
         steep.o    chain.o    dyna.o     sphpro.o    us.o  core_rel.o \
         aedens.o   wavpre.o   wavpre_noio.o broyden.o \
         dynbr.o    rmm-diis.o reader.o   writer.o   tutor.o xml_writer.o \
         brent.o    stufak.o   fileio.o   opergrid.o stepver.o  \
         chgloc.o   fast_aug.o fock.o     mkpoints_change.o sym_grad.o \
         mymath.o   internals.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \
         hamil_high.o nmr.o    force.o \
         pead.o     subrot.o   subrot_scf.o pwlhf.o  gw_model.o optreal.o   davidson.o \
         electron.o rot.o  electron_all.o shm.o    pardens.o  paircorrection.o \
         optics.o   constr_cell_relax.o   stm.o    finite_diff.o elpol.o    \
         hamil_lr.o rmm-diis_lr.o  subrot_cluster.o subrot_lr.o \
         lr_helper.o hamil_lrf.o   elinear_response.o ilinear_response.o \
         linear_optics.o linear_response.o   \
         setlocalpp.o  wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \
         ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \
         ump2.o bse.o acfdt.o chi.o sydmat.o

INC=

vasp: $(SOURCE) $(FFT3D) $(INC) main.o
        rm -f vasp
        $(FCL) -o vasp main.o  $(SOURCE)   $(FFT3D) $(LIB) $(LINK)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
        $(FCL) -o makeparam  $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
        $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
        $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
        $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
        $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:       
        -rm -f *.g *.f *.o *.L *.mod ; touch *.F

main.o: main$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
poscar.o: poscar.inc poscar.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.inc wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
        $(CPP)
        $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F
        $(CPP)
        $(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
        $(CPP)
$(SUFFIX).o:
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules
#-----------------------------------------------------------------------
# these special rules are cummulative (that is once failed
#   in one compiler version, stays in the list forever)
# -tpp5|6|7 P, PII-PIII, PIV
# -xW use SIMD (does not pay of on PII, since fft3d uses double prec)
# all other options do no affect the code performance since -O1 is used

fft3dlib.o : fft3dlib.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
fft3dfurth.o : fft3dfurth.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

radial.o : radial.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symlib.o : symlib.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symmetry.o : symmetry.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave_mpi.o : wave_mpi.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave.o : wave.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

dynbr.o : dynbr.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

asa.o : asa.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

broyden.o : broyden.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

us.o : us.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

LDApU.o : LDApU.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
====================================================================================

[ Last edited by qlm2001 on 2012-5-8 at 17:05 ]
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐，对您同样有帮助:
1楼 2012-05-08 16:56:22
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

liliangfang

荣誉版主 (著名写手)

【答案】应助回帖

★
感谢参与，应助指数 +1
fzx2008: 金币+1, 谢谢指教 2012-05-08 18:39:50
请确定ifort编译成功了在编译vasp
赞一下(1人) 回复此楼
2楼2012-05-08 17:18:07
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

dxf_dxf_dxf

银虫 (小有名气)

【答案】应助回帖

★ ★ ★ ★ ★
感谢参与，应助指数 +1
fzx2008: 金币+3, 谢谢指教 2012-05-08 18:40:29
qlm2001: 金币+2, ★★★很有帮助 2012-05-09 22:44:57
你好！
在安装vasp之前，你需要安装如下几个东西：
引用回帖:
1 Fortran编译器
2 BLAS&LAPACK数学库
3 FFTW3D（可选）
4 ScaLapack（可选）
5 MPI

Fortran编译器有好多种，例如Intel Fortran/PGFortran/gfortran等，安装方法和性能个不一样
BLAS/LAPACK也有很多种，例如MKL/ACML/GotoBlas+netlib/ATLAS等
MPI也有很多种，例如openmpi/mpich2/Intel MPI等
详情请参照
http://muchong.com/bbs/viewthread.php?tid=4340868
有问题可以在原帖下回复！
赞一下(1人) 回复此楼
3楼2012-05-08 17:30:57
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

qlm2001

铁虫 (小有名气)
引用回帖:
2楼: Originally posted by liliangfang at 2012-05-08 17:18:07:
请确定ifort编译成功了在编译vasp

Ifort 我想已经编译成功了，装完也设环境变量了，另外当输入 ifort-v时也出来ifort的版本号了
赞一下 回复此楼
4楼2012-05-08 17:56:16
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

qlm2001

铁虫 (小有名气)
引用回帖:
3楼: Originally posted by dxf_dxf_dxf at 2012-05-08 17:30:57:
你好！
在安装vasp之前，你需要安装如下几个东西：

Fortran编译器有好多种，例如Intel Fortran/PGFortran/gfortran等，安装方法和性能个不一样
BLAS/LAPACK也有很多种，例如MKL/ACML/GotoBlas+netlib/ATLAS等 ...

谢谢您的回复

我用的是intel Fortran的编译器，BLAS用的是gogoblas2

我再试试您帖子中提到的其它方法吧，对了，另外有一个问题想向高人请教，我看makefile 中有这么一行

#LAPACK=../vasp.5.lib/lapack_double.o

为什么我在我的vasp.5.lib文件夹下下没有找到这个文件呢，是不是因为我的vasp是盗版的啊，我是从网上下的。
赞一下(1人) 回复此楼
5楼2012-05-08 18:07:21
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

liliangfang

荣誉版主 (著名写手)

【答案】应助回帖

★
贺仪: 金币+1, 谢谢指教！ 2012-05-09 09:33:36
引用回帖:
5楼: Originally posted by qlm2001 at 2012-05-08 18:07:21:
谢谢您的回复

我用的是intel Fortran的编译器，BLAS用的是gogoblas2

我再试试您帖子中提到的其它方法吧，对了，另外有一个问题想向高人请教，我看makefile 中有这么一行

#LAPACK=../vasp.5.lib/lapack_ ...

先在vasp.5.lib文件夹下make然后vasp.5文件夹下make,但是你的错误提示是找不到ifort你试试which ifort
赞一下(1人) 回复此楼
6楼2012-05-08 18:45:38
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

花无刺

木虫 (著名写手)

二师兄

【答案】应助回帖

★ ★ ★ ★
感谢参与，应助指数 +1
liliangfang: 金币+1, 谢谢交流 2012-05-09 08:43:37
贺仪: 金币+2, 谢谢指教！ 2012-05-09 09:33:43
qlm2001: 金币+1, ★有帮助 2012-05-09 22:45:40
BLAS=  /vasp/vasp.5.2/GotoBLAS2/libgoto2.so

LAPACK= ../vasp/vasp.5.lib/lapack_double.o

FFT3D   = fft3dfurth.o fft3dlib.o

这三项是要修改的，你是选用默认的了，当然make会出错

上面两项与你ifort的版本有关

后一项与fftw的版本有关，自己在坛子里多转转，关于怎么修改的，太多的教程了
赞一下(1人) 回复此楼
7楼2012-05-08 23:30:45
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

9789074

新虫 (小有名气)

【答案】应助回帖

http://muchong.com/bbs/viewthread.php?tid=4504421
赞一下 回复此楼
8楼2012-05-13 15:17:10
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 qlm2001 的主题更新
81/1返回列表
普通表情 龙 兔 虎 猫
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[论文投稿] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 w89i99eaeh 2026-02-22 5/250 2026-02-23 08:04 by w4l55oybr1
[考研] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 khieu8v8m0 2026-02-22 7/350 2026-02-23 07:54 by w4l55oybr1
[博后之家] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +6 3dfhjxgsh7 2026-02-22 9/450 2026-02-23 07:49 by w4l55oybr1
[考博] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +4 khieu8v8m0 2026-02-22 4/200 2026-02-23 06:46 by jsjzfl
[硕博家园] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 8rmuugja8q 2026-02-22 6/300 2026-02-23 06:39 by w4l55oybr1
[公派出国] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 khieu8v8m0 2026-02-22 5/250 2026-02-23 06:29 by w4l55oybr1
[硕博家园] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +4 khieu8v8m0 2026-02-22 8/400 2026-02-23 06:24 by w4l55oybr1
[考研] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +4 usprnugpzw 2026-02-21 10/500 2026-02-23 04:58 by 5jlh3qtdvx
[考博] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +5 3dfhjxgsh7 2026-02-22 6/300 2026-02-23 02:04 by 5jlh3qtdvx
[教师之家] 版面费该交吗 +7 苹果在哪里 2026-02-22 8/400 2026-02-22 22:37 by otani
[基金申请] 基金正文30页指的是报告正文还是整个申请书 +5 successhe 2026-02-16 6/300 2026-02-22 21:38 by 山西悬空寺空悬�
[基金申请] 面上可以超过30页吧？ +4 阿拉贡aragon 2026-02-22 4/200 2026-02-22 21:22 by 山西悬空寺空悬�
[教师之家] 为什么中国大学教授们水了那么多所谓的顶会顶刊，但还是做不出宇树机器人？ +5 欢乐颂叶蓁 2026-02-21 5/250 2026-02-22 21:15 by 山西悬空寺空悬�
[论文投稿] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +4 usprnugpzw 2026-02-21 6/300 2026-02-22 19:48 by w89i99eaeh
[考研] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 3dfhjxgsh7 2026-02-22 4/200 2026-02-22 16:52 by khieu8v8m0
[找工作] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 usprnugpzw 2026-02-22 3/150 2026-02-22 16:37 by khieu8v8m0
[公派出国] 售SCI一区文章，我:8 O5 51O 54,科目齐全,可+急 +3 usprnugpzw 2026-02-21 4/200 2026-02-22 16:27 by khieu8v8m0
[基金申请] “人文社科而论，许多学术研究还没有达到民国时期的水平” +4 苏东坡二世 2026-02-18 5/250 2026-02-22 16:07 by liangep1573
[基金申请] 什么是人一生最重要的？ +4 瞬息宇宙 2026-02-21 4/200 2026-02-22 11:44 by huagongfeihu
[基金申请] 体制内长辈说体制内绝大部分一辈子在底层，如同你们一样大部分普通教师忙且收入低 +9 瞬息宇宙 2026-02-20 12/600 2026-02-21 10:39 by 欢乐颂叶蓁
信息提示
关闭
请填处理意见
关闭