24小时热门版块排行榜    

CyRhmU.jpeg
查看: 1150  |  回复: 2
本帖产生 1 个 翻译EPI ,点击这里进行查看
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

denvoll

金虫 (正式写手)

独立的窗外客

[求助] [求助]英译汉-ISO标准部分条文

For the major elements, the following recommendations are given for the determination of the integration depth:
a) Define the coating thickness as the depth at which the mass fraction of the major element is reduced to 50 % of the maximum value in the coating. The maximum value is the highest mass fraction between start and Zn = 84 %.
b) Define the width of the interface region (which is equivalent to the practical depth resolution) as the difference between the depth at which the mass fractions of the major element in the coating is reduced
to 84 % of the maximum value in the coating and the depth at which it is reduced to 16 % of its maximum value.
c) The integration depth is the sum of the coating thickness and the interface width.
人生总有不可预料的事情
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

denvoll

金虫 (正式写手)

独立的窗外客

谢谢,我想我应该理解了其中的意思!很感谢。
人生总有不可预料的事情
3楼2012-02-18 13:17:47
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 3 个回答

terry_well

荣誉版主 (知名作家)

笑熬浆糊——满脑浆糊

优秀版主优秀版主

【答案】应助回帖

爱与雨下(金币+1): 2012-02-18 12:40:38
denvoll(金币+30, 翻译EPI+1): ★★★★★最佳答案 谢谢 2012-02-18 13:20:18
对确定主要元素的集成深度提出如下建议:
a)涂层中主要元素的质量分数降低到最大值的50%时的深度定义为涂层厚度。最大值是从起点到锌=84%之间的最高质量分数;
b)将涂层中的主要元素之间质量分数从到其最大价值的84%减少到它的深度的16%时的深度差异定义界面区域的宽度(这相当于实际的深度分辨率);
C)集成深度是涂层厚度和界面宽度的总和。
看没人动手,外行,照字面意思翻译。
签名:英文名“Terry”,EC版专用;中文名“浆糊哥”,灌水专用,谢谢合作!
2楼2012-02-18 03:31:36
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
信息提示
请填处理意见