| 查看: 1330 | 回复: 12 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | |||
[交流]
英译汉 帮帮忙
|
|||
|
Acetic acid was supplied by Sigma and ethanol and ethyl acetate were supplied by Merck. The components were degassed ultrasonically,dried over molecular sieves (type4A,Aldrich),and kept in an inert argon with a maximum water content of 2*10-6mass fraction. Their mass fraction purities were>99 mass% for acetic acid and>99.8 mass% for methanol,ethanol and ethyl acetate. The water was bidistillated and deionized. The catalyst used was an ion-exchange resin Amberlyst 15 supplied by Supelco.The catalyst was washed with ethanol and water to remove impurities and dried at 363.15K. Mean diameter of the resin beads,obtained by scanning electron microscopy, is 7.6*10-3m. A Hewlett-Packard 6890GC chromatograph was used to determine the composition of the samples.The gas chromatograph column was HP-FFAP polyethylene glycol TPA equipped with series of connected thermal conductivity and flame ionization detectors to detect water and the other compounds in the same run.Helium was used as carrier at a flow rate of 6.8 *10-8m-3 s-1 . Injector, detectors and oven temperature were 473.15,503.15 and 423.15K,respectively.To know the composition of these quaternary mixtures it is necessary to have quaternary patrons of known composition,so 249 quaternary mixtures were prepared by mass and were measured by gas chromatography. The experiments were performed in a stirred glass reactor with a volume of 1.5*10-4m 3. The temperature in the reactor was maintained within+0.1K. The acetic acid and the catalyst were heated at reaction temperature,ethanol was heated separately.When temperature reaction is reached,the second reactant was added to the mixture in the reactor and this was considered the starting time of the reaction.During each experiment, samples of about 5*10-7m3 were taken and cooled to avoid vaporization before analyzing. The homogeneous reactions, esterification or hydrolysis,are catalyzed by the acetic acid.Table1 summarizes the experiments made at 303.15, 323.15 and 353.15K. The duration of each experiment to reach chemical equilibrium is indicated in the third column. |
回复此楼» 猜你喜欢
298求调剂
已经有4人回复
-
生物学308分求调剂（一志愿华东师大）做过分子实验
已经有7人回复
-
288求调剂，一志愿华南理工大学071005
已经有11人回复
-
一志愿深大085601材料工程专业（专硕）300分可以调剂去哪
已经有13人回复
-
一志愿郑州大学085600求调剂
已经有24人回复
-
327求调剂
已经有12人回复
-
327求调剂
已经有10人回复
-
材料考研求调剂总分280
已经有28人回复
-
308求调剂
已经有14人回复
-
材料专硕调剂
已经有13人回复
» 抢金币啦！回帖就可以得到:
-
铟锡化合物半导体材料与器件团队推介
+1/191
-
淮北师范大学资源与环境硕士研究生调剂名额充足（26人），欢迎调剂。
+2/138
-
邵阳学院食品与化学工程学院 生物与医药专业接受调剂生
+2/46
-
河北大学分析化学招收多名调剂考生
+5/45
-
考研调剂-能源动力、动力工程及工程热物理、新能源科学与工程、建环、材料等学科背景
+1/39
-
河南中部某本科高校 资源与环境（专硕）研究生 招生信息
+1/37
-
中国科学院深圳先进院唐永炳研究员团队诚聘电化学/电池方向博士后
+1/35
-
爆 名额多 河北大学招收生物与医药专业调剂考生
+2/34
-
北京理工大学（珠海）招收2026级考核制博士
+1/21
-
抗病毒性传染病创新药物全国重点实验室—接收化学、生物、药学、生物与医药调剂考生
+1/18
-
2026广东医科大学生物医学工程学硕、电子信息专硕接收调剂
+1/14
-
★上海★上海工程技术大学·环境与资源创新中心（ICER）接收化工材料环境等学科调剂生
+1/11
-
光电磁功能分子材料等方向
+1/7
-
齐齐哈尔大学李莉课题组诚招2026级考研调剂生（学硕和专硕）
+1/6
-
26
+1/5
-
武汉纺织大学全国重点实验室吕永钢教授课题组招收材料、化学、生物相关专业硕士研究生
+1/5
-
长江师范学院 材料工程 招收调剂学生 还有大量名额
+1/5
-
济南大学2026年硕士研究生招生预调剂公告
+1/4
-
上海交通大学化学化工学院张智涛课题组诚聘博士后
+1/3
-
长春大学计算机科学技术学院硕士研究生调剂（计算机科学技术、网络空间安全）
+1/3
dwaww(金币+1, 翻译EPI+1): 谢啦 可是只有一段呀 2011-03-20 19:44:38
|
Acetic acid was supplied by Sigma and ethanol and ethyl acetate were supplied by Merck. The components were degassed ultrasonically,dried over molecular sieves (type4A,Aldrich),and kept in an inert argon with a maximum water content of 2*10-6mass fraction. Their mass fraction purities were>99 mass% for acetic acid and>99.8 mass% for methanol,ethanol and ethyl acetate. The water was bidistillated and deionized. 醋酸由Sigma公司提供，乙醇和乙酸乙酯为Merck公司产品。这些原料经超声脱除空气、分子筛（4A型，Aldrich公司产品）干燥，然后保存在内充氩气的干燥器中（里面水含量最大不超过2*10-6质量分数）。醋酸的质量分数纯度大于99%，而乙醇和乙酸乙酯的质量分数超过99.8%。水为二次蒸馏、去离子水。 |
4楼2011-03-19 20:33:52
2楼2011-03-19 12:48:25
3楼2011-03-19 13:53:33
dwaww(金币+1): 2011-03-20 19:47:53
|
The catalyst used was an ion-exchange resin Amberlyst 15 supplied by Supelco.The catalyst was washed with ethanol and water to remove impurities and dried at 363.15K. Mean diameter of the resin beads,obtained by scanning electron microscopy, is 7.6*10-3m. 所用催化剂是由Supelco公司提供的一种名叫Amberlyst 15的离子交换树脂。催化剂用乙醇和水洗涤除去杂质然后再363.15K下干燥。用扫描电镜测得树脂球的平均直径为7.6*10-3米。 |
5楼2011-03-19 20:42:02
简单回复
Mally8913楼
2011-03-20 11:45
回复
