| 查看: 2586 | 回复: 20 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | |||
[交流]
急！！！英语翻译成汉语
|
|||
|
共13段，根据长度每翻译1段分别给金币3——10个，如果由一个人全部翻译出，则给66个金币。时间比较急，请尽快翻译，谢谢！ 1、Export a surface file to Ansys 2、After you have calculated a surface mesh and remeshed it to make it suitable for FEA purposes, you can export this surface mesh to an Ansys file. To do this, go to the Export menu and choose Ansys. This will open following interface: 3、Mimics can export your remeshed 3D object to Ansys as an Area-based or an Element-based file 4、Area-based: Each triangle is exported as a separate face into the ansys-file. Importing this file in Ansys will result in a remeshing of the file, and will loose the original triangulation. Element-based: The part is exported as a mesh, having triangles as elements. To generate the volume mesh in Ansys, the FVMESH command should be used. 5、We advice you to use the Element-based export as this will preserve the obtained quality of the mesh. To export add the object to the list, choose the appropriate Ansys File format and click on the OK button. Convert a surface mesh to a volumetric mesh in Ansys This surface mesh can be imported in Ansys by going to the File menu in Ansys and choosing “Read Input From”. 6、Convert an Area Based surface mesh to a volumetric mesh First select an element type to which you want to assign the surface mesh. You can do this with the ET command e.g. ET,1,SHELL93. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a surface element type. To mesh the areas to elements, go to Main Menu > Preprocessor > Meshing > MeshTool. In the MeshTool check smart size and put it to coarse. Select as mesh Areas and as Shape Tri and free. 7、Click on Mesh, the Mesh areas dialog pops up. In this dialog click on pick all. 8、To release all associations between the current solid model and finite element model, execute the command, MODMSH,detach. Add a solid element type to generate your volumetric mesh, you can do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type. If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types: SOLID72 (linear tetrahedron) SOLID92 (quadratic tetrahedron) If you require other elements types, please let us know and we will try to implement those elements in our future releases. To generate the volume mesh you should use the command FVMesh or you can execute this command from the main menu Preprocessor | Meshing | Mesh | Tet Mesh From | Area Elements. 9、Convert an Element Based surface mesh to a volumetric mesh In Ansys select File | Read input from and load the file 10、The surface element type is Shell93 by default. Note: If desired you can change the surface element type with the command ET, ITYPE, Ename, KOP1, KOP2, KOP3, KOP4, KOP5, KOP6, INOPR (e.g. et,1,Mesh200) Add a solid element type to generate your volumetric mesh, you can again do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type. If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types: SOLID72 (linear tetrahedron) SOLID92 (quadratic tetrahedron) If you require other elements types, please let us know and we will try implement those elements in our future releases. 11、To generate the volume mesh you should use the command FVMesh or you can execute this command from the main menu Preprocessor | Meshing | Mesh | Tet Mesh From | Area Elements. Import Ansys files in Mimics As stated in the Mimics help file, the Mimics Ansys importer needs three different ASCII files as input. These three files are the PREP7 file, a file with a list of the elements and a file with a list of the nodes. More information about these three files can be found further in this document. Mimics requires the user to import only the PREP7 file: Mimics will use the references to the two other files in the PREP7 file. To import the PREP7 file, click on the Import button in the FEA project management tab: 12、This will open a file chooser: 13、Change the type of the listed files from Patran Neutral to Ansys File and all files will be shown (Ansys files do not have a general extension). Then browse to the directory where the files are located, select the PREP7 file and click on the Open button, the files will be imported. |
回复此楼» 猜你喜欢
拟解决的关键科学问题还要不要写
已经有8人回复
-
请教限项目规定
已经有5人回复
-
最失望的一年
已经有16人回复
-
存款400万可以在学校里躺平吗
已经有33人回复
-
求助一下有机合成大神
已经有3人回复
-
求推荐英文EI期刊
已经有5人回复
-
26申博
已经有3人回复
-
基金委咋了？2026年的指南还没有出来？
已经有10人回复
-
基金申报
已经有6人回复
-
疑惑？
已经有5人回复
» 抢金币啦！回帖就可以得到:
-
南佛罗里达大学化学系刘文奇课题组 2026 Fall 招收有机/超分子方向博士生
+2/936
-
南佛罗里达大学化学系刘文奇课题组 2026 Fall 招收有机/超分子方向博士生
+2/934
-
南京大学智能驱动与感知材料实验室诚招硕士/科研助理
+1/271
-
招收2026年春-申请考核博士生-仿生组装/生物能源方向
+1/175
-
中南林科大-自然资源与生态环境管理-博士招生（导师本人发布）
+1/86
-
大连理工大学智能系统实验室优秀硕博研究生招生
+1/79
-
上海交通大学变革分子学中心申涛课题组2026秋季入学推荐-考核制博士招生（有机）
+1/78
-
哈尔滨工业大学王东博课题组/中科院上海微系统所梁丽娟课题组招收2026年博士生1名
+1/70
-
中国地质大学（武汉）地质学、地质资源与地质工程、资源与环境方向招生，请尽快联系！
+1/70
-
[长期合作招募] 同济大学肖倩老师团队诚邀港澳学者学术交流
+1/56
-
[长期合作招募] 同济大学肖倩老师团队诚邀港澳学者学术交流
+1/34
-
北欧岗位制博士招生（锂离子电池正极材料和粘结剂）
+1/32
-
西南大学化学化工学院彭云贵教授课题组招有机化学博士研究生
+2/18
-
2026申博自荐 本硕双一流学科 纳米药物递送方向 一篇一区TOP 两个国家奖学金
+1/18
-
云南大学智能光电子课题组招收申请-考核博士研究生1名（光电、光学）
+1/16
-
2026 年南方医科大学基础医学院李琳课题组招收“申请-审核” 博士研究生
+1/5
-
南方科技大学田雷蕾课题组招收2026年博士生
+1/4
-
紧急招博士生报考
+1/3
-
河北工业大学层状材料与器件团队诚聘二维材料与原位电子显微学方向青年教师与博士后
+1/3
-
福州大学梁宇航副教授招收2026年申核制博士研究生/硕士研究生（理论计算方向）
+1/1
已经翻译过的就不用再翻译了，谢谢！
|
部分内容已经翻译好了，麻烦高手继续翻译以下内容，麻烦指出是翻译第几部分的内容，本人将根据翻译情况赠送金币，谢谢： 1、Add a solid element type to generate your volumetric mesh。 2、If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:SOLID72 (linear tetrahedron) SOLID92 (quadratic tetrahedron) 3、Note: If desired you can change the surface element type with the command ET, ITYPE, Ename, KOP1, KOP2, KOP3, KOP4, KOP5, KOP6, INOPR (e.g. et,1,Mesh200) 4、Add a solid element type to generate your volumetric mesh, you can again do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type. 5、If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:SOLID72 (linear tetrahedron) SOLID92 (quadratic tetrahedron) 6、 Import Ansys files in Mimics 7、As stated in the Mimics help file, the Mimics Ansys importer needs three different ASCII files as input. These three files are the PREP7 file, a file with a list of the elements and a file with a list of the nodes. More information about these three files can be found further in this document. 8、Mimics requires the user to import only the PREP7 file: Mimics will use the references to the two other files in the PREP7 file. To import the PREP7 file, click on the Import button in the FEA project management tab: |
16楼2011-03-08 15:00:38
2楼2011-03-07 21:03:01
haohulili(金币+4): 非常好！ 2011-03-08 14:15:54
|
After you have calculated a surface mesh and remeshed it to make it suitable for FEA purposes, you can export this surface mesh to an Ansys file. To do this, go to the Export menu and choose Ansys. This will open following interface: 当你计算了一个表面网格后并将其重网格化以适于有限元分析目的，你可将此表面网格导入一个Ansys（美国最大的有限元分析软件Ansys公司）文件。要进行这一操作，请按“导入”按钮并选择Ansys键。这将会打开下面的界面： |
3楼2011-03-08 00:57:50
4楼2011-03-08 01:02:36