24小时热门版块排行榜

返回列表

本帖产生 1 个翻译EPI ，点击这里进行查看

当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖

haohulili

木虫 (小有名气)

应助: 0 (幼儿园)
金币: 3495.7
帖子: 51
在线: 42小时
虫号: 57765

[交流] 急！！！英语翻译成汉语

共13段，根据长度每翻译1段分别给金币3——10个，如果由一个人全部翻译出，则给66个金币。时间比较急，请尽快翻译，谢谢！

1、Export a surface file to Ansys

2、After you have calculated a surface mesh and remeshed it to make it suitable for FEA purposes, you can export this surface mesh to an Ansys file. To do this, go to the Export menu and choose Ansys. This will open following interface:

3、Mimics can export your remeshed 3D object to Ansys as an Area-based or an Element-based file

4、Area-based: Each triangle is exported as a separate face into the ansys-file.  Importing this file in Ansys will result in a remeshing of the file, and will loose the original triangulation.
Element-based: The part is exported as a mesh, having triangles as elements.  To generate the volume mesh in Ansys, the FVMESH command should be used.

5、We advice you to use the Element-based export as this will preserve the obtained quality of the mesh. To export add the object to the list, choose the appropriate Ansys File format and click on the OK button.
Convert a surface mesh to a volumetric mesh in Ansys
This surface mesh can be imported in Ansys by going to the File menu in Ansys and choosing “Read Input From”.

6、Convert an Area Based surface mesh to a volumetric mesh
First select an element type to which you want to assign the surface mesh.  You can do this with the ET command e.g. ET,1,SHELL93. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a surface element type.
To mesh the areas to elements, go to Main Menu > Preprocessor > Meshing > MeshTool. In the MeshTool check smart size and put it to coarse. Select as mesh Areas and as Shape Tri and free.

7、Click on Mesh, the Mesh areas dialog pops up. In this dialog click on pick all.

8、To release all associations between the current solid model and finite element model, execute the command, MODMSH,detach.
Add a solid element type to generate your volumetric mesh, you can do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type.
If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:
SOLID72 (linear tetrahedron)
SOLID92 (quadratic tetrahedron)
If you require other elements types, please let us know and we will try to implement those elements in our future releases.
To generate the volume mesh you should use the command FVMesh or you can execute this command from the main menu Preprocessor | Meshing | Mesh | Tet Mesh From | Area Elements.

9、Convert an Element Based surface mesh to a volumetric mesh
In Ansys select File | Read input from and load the file

10、The surface element type is Shell93 by default.
Note: If desired you can change the surface element type with the command ET, ITYPE, Ename, KOP1, KOP2, KOP3, KOP4, KOP5, KOP6, INOPR (e.g. et,1,Mesh200)
Add a solid element type to generate your volumetric mesh, you can again do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type.
If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:
SOLID72 (linear tetrahedron)
SOLID92 (quadratic tetrahedron)
If you require other elements types, please let us know and we will try implement those elements in our future releases.

11、To generate the volume mesh you should use the command FVMesh or you can execute this command from the main menu Preprocessor | Meshing | Mesh | Tet Mesh From | Area Elements.
Import Ansys files in Mimics
As stated in the Mimics help file, the Mimics Ansys importer needs three different ASCII files as input. These three files are the PREP7 file, a file with a list of the elements and a file with a list of the nodes. More information about these three files can be found further in this document.
Mimics requires the user to import only the PREP7 file: Mimics will use the references to the two other files in the PREP7 file. To import the PREP7 file, click on the Import button in the FEA project management tab:

12、This will open a file chooser:

13、Change the type of the listed files from Patran Neutral to Ansys File and all files will be shown (Ansys files do not have a general extension).
Then browse to the directory where the files are located, select the PREP7 file and click on the Open button, the files will be imported.

回复此楼

» 猜你喜欢

现代”学阀”该如何界定已经有12人回复
国社科系统bug了，是不是要放榜了？已经有10人回复
课题组招2027级博士上海工程技术大学激光智能制造方向已经有4人回复
上海工程技术大学激光智能制造课题组 2027级博士研究生招生已经有3人回复
上海工程技术大学激光智能制造课题组｜2027级博士研究生招生公告已经有11人回复
我的奶奶已经有3人回复

» 抢金币啦！回帖就可以得到:

查看全部散金贴

1楼 2011-03-07 20:45:55

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

haohulili

木虫 (小有名气)

应助: 0 (幼儿园)
金币: 3495.7
帖子: 51
在线: 42小时
虫号: 57765

已经翻译过的就不用再翻译了，谢谢！

部分内容已经翻译好了，麻烦高手继续翻译以下内容，麻烦指出是翻译第几部分的内容，本人将根据翻译情况赠送金币，谢谢：
1、Add a solid element type to generate your volumetric mesh。
2、If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:SOLID72 (linear tetrahedron)
SOLID92 (quadratic tetrahedron)
3、Note: If desired you can change the surface element type with the command ET, ITYPE, Ename, KOP1, KOP2, KOP3, KOP4, KOP5, KOP6, INOPR (e.g. et,1,Mesh200)
4、Add a solid element type to generate your volumetric mesh, you can again do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type.
5、If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:SOLID72 (linear tetrahedron)
SOLID92 (quadratic tetrahedron)
6、 Import Ansys files in Mimics
7、As stated in the Mimics help file, the Mimics Ansys importer needs three different ASCII files as input. These three files are the PREP7 file, a file with a list of the elements and a file with a list of the nodes. More information about these three files can be found further in this document.
8、Mimics requires the user to import only the PREP7 file: Mimics will use the references to the two other files in the PREP7 file. To import the PREP7 file, click on the Import button in the FEA project management tab: