应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台» 学术交流区» 论文翻译 » 论文翻译求助完结子版 » 急！！！英语翻译成汉语
51/1返回列表
查看: 2630  |  回复: 20
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看
本帖产生 1 个 翻译EPI ，点击这里进行查看
当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖

haohulili

木虫 (小有名气)

[交流] 急！！！英语翻译成汉语

共13段，根据长度每翻译1段分别给金币3——10个，如果由一个人全部翻译出，则给66个金币。时间比较急，请尽快翻译，谢谢！


1、Export a surface file to Ansys


2、After you have calculated a surface mesh and remeshed it to make it suitable for FEA purposes, you can export this surface mesh to an Ansys file. To do this, go to the Export menu and choose Ansys. This will open following interface:

3、Mimics can export your remeshed 3D object to Ansys as an Area-based or an Element-based file
  
4、Area-based: Each triangle is exported as a separate face into the ansys-file.  Importing this file in Ansys will result in a remeshing of the file, and will loose the original triangulation.  
Element-based: The part is exported as a mesh, having triangles as elements.  To generate the volume mesh in Ansys, the FVMESH command should be used.  

5、We advice you to use the Element-based export as this will preserve the obtained quality of the mesh. To export add the object to the list, choose the appropriate Ansys File format and click on the OK button.
Convert a surface mesh to a volumetric mesh in Ansys
This surface mesh can be imported in Ansys by going to the File menu in Ansys and choosing “Read Input From”.



6、Convert an Area Based surface mesh to a volumetric mesh
First select an element type to which you want to assign the surface mesh.  You can do this with the ET command e.g. ET,1,SHELL93. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a surface element type.
To mesh the areas to elements, go to Main Menu > Preprocessor > Meshing > MeshTool. In the MeshTool check smart size and put it to coarse. Select as mesh Areas and as Shape Tri and free.


7、Click on Mesh, the Mesh areas dialog pops up. In this dialog click on pick all.


8、To release all associations between the current solid model and finite element model, execute the command, MODMSH,detach.
Add a solid element type to generate your volumetric mesh, you can do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type.
If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:
SOLID72 (linear tetrahedron)
SOLID92 (quadratic tetrahedron)
If you require other elements types, please let us know and we will try to implement those elements in our future releases.
To generate the volume mesh you should use the command FVMesh or you can execute this command from the main menu Preprocessor | Meshing | Mesh | Tet Mesh From | Area Elements.

9、Convert an Element Based surface mesh to a volumetric mesh
In Ansys select File | Read input from and load the file



10、The surface element type is Shell93 by default.
Note: If desired you can change the surface element type with the command ET, ITYPE, Ename, KOP1, KOP2, KOP3, KOP4, KOP5, KOP6, INOPR (e.g. et,1,Mesh200)
Add a solid element type to generate your volumetric mesh, you can again do this with the ET command e.g. ET,2,SOLID92. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a solid element type.
If you want to load your volume mesh back into Mimics for material assignment you should use one of the following element types:
SOLID72 (linear tetrahedron)
SOLID92 (quadratic tetrahedron)
If you require other elements types, please let us know and we will try implement those elements in our future releases.

11、To generate the volume mesh you should use the command FVMesh or you can execute this command from the main menu Preprocessor | Meshing | Mesh | Tet Mesh From | Area Elements.
Import Ansys files in Mimics
As stated in the Mimics help file, the Mimics Ansys importer needs three different ASCII files as input. These three files are the PREP7 file, a file with a list of the elements and a file with a list of the nodes. More information about these three files can be found further in this document.
Mimics requires the user to import only the PREP7 file: Mimics will use the references to the two other files in the PREP7 file. To import the PREP7 file, click on the Import button in the FEA project management tab:

12、This will open a file chooser:

13、Change the type of the listed files from Patran Neutral to Ansys File and all files will be shown (Ansys files do not have a general extension).
Then browse to the directory where the files are located, select the PREP7 file and click on the Open button, the files will be imported.
回复此楼

» 猜你喜欢

» 抢金币啦！回帖就可以得到:

查看全部散金贴
1楼 2011-03-07 20:45:55
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jwdxbjzh

至尊木虫 (职业作家)
haohulili(金币+3): 谢谢！希望能继续帮忙翻译下！ 2011-03-08 14:44:24
6、Convert an Area Based surface mesh to a volumetric mesh
First select an element type to which you want to assign the surface mesh.  You can do this with the ET command e.g. ET,1,SHELL93. Or in the main menu select Preprocessor | Element type | Add/Edit/delete and add a surface element type.
To mesh the areas to elements, go to Main Menu > Preprocessor > Meshing > MeshTool. In the MeshTool check smart size and put it to coarse. Select as mesh Areas and as Shape Tri and free.
将一个基域面网格转成一个体网格
首先选择一个你想赋予面网格的元文件。你可用ET命令（例如ET,1, SHELL93)来处理此操作，或在主菜单中选择点击“预处理器-元文件类型-添加/编辑/删除”按钮以添加一个面元文件类型。
要网格化此区域为一元文件，请点“主菜单-预处理器-网格化-网格工具”。在此网格工具中选“智能尺度”将其设定为“粗略”。选“网区”、“型三”和“自由”。
赞一下 回复此楼
14楼2011-03-08 06:04:41
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 21 个回答

爱与雨下

荣誉版主 (职业作家)
haohulili(金币+1): 谢谢 2011-03-08 14:13:13
Export a surface file to Ansys
导入一表面文件到 Ansys
赞一下 回复此楼
2楼2011-03-07 21:03:01
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jwdxbjzh

至尊木虫 (职业作家)
haohulili(金币+4): 非常好！ 2011-03-08 14:15:54
After you have calculated a surface mesh and remeshed it to make it suitable for FEA purposes, you can export this surface mesh to an Ansys file. To do this, go to the Export menu and choose Ansys. This will open following interface:

当你计算了一个表面网格后并将其重网格化以适于有限元分析目的，你可将此表面网格导入一个Ansys（美国最大的有限元分析软件Ansys公司）文件。要进行这一操作，请按“导入”按钮并选择Ansys键。这将会打开下面的界面：
赞一下 回复此楼
3楼2011-03-08 00:57:50
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jwdxbjzh

至尊木虫 (职业作家)
haohulili(金币+2): 感谢！ 2011-03-08 14:17:16
Mimics can export your remeshed 3D object to Ansys as an Area-based or an Element-based file
模拟能导入你重网格化的3D图到Ansys分析系统并作为其一个基域或基元文件。
赞一下 回复此楼
4楼2011-03-08 01:02:36
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 21 个回答
普通表情 龙 兔 虎 猫 高级回复 (可上传附件)
信息提示
关闭
请填处理意见
关闭