[交流] 【求助】请问低分子量的硅氧烷和高分子量的硅氧烷如何分离？

我现在在做的东西里含有低分子量的D4和分子量为3000左右的产物，由于产物里含有双键，所以蒸馏的方法基本上是不予考虑了。请问各位有什么比较好的方法分离不同分子量的硅氧烷么？最好能有相关资料，谢谢了！！！
我个人在想的是过柱子或者通过冷冻结晶的方法，但是具体的做法还没查到。。。。

回复此楼

» 猜你喜欢

存款400万可以在学校里躺平吗已经有36人回复
英文综述是否需要润色及查重已经有5人回复
救命帖已经有5人回复
限项规定已经有5人回复
为什么nbs上溴没有产物点出现呢已经有9人回复
招博士已经有3人回复
最失望的一年已经有18人回复
求推荐英文EI期刊已经有5人回复

» 本主题相关商家推荐: (我也要在这里推广)

» 本主题相关价值贴推荐，对您同样有帮助:

乙烯基聚硅氧烷能和丙烯酸酯类加聚吗？已经有18人回复
请问有没有做合成橡胶的同学？已经有15人回复
【求助】【求助】硅氧烷改性丙烯酸酯乳液聚合中的凝胶问题已经有22人回复
【求助】求高人指教：乙烯基三乙氧基硅氧烷（A-151）改性丙烯酸乳液后怎么实现在室温� 已经有5人回复
【讨论】硅氧烷聚合问题讨论已经有15人回复
【交流】请教聚硅氧烷分子量的测定已经有13人回复
【求助】端羟基聚二甲基硅氧烷如何固化？？已经有15人回复
【求助】聚甲基氢硅氧烷(含氢硅油)如何与含双键的小分子加成？已经有14人回复
【求助】哪里有侧链带羟基的聚甲基硅氧烷卖？已经有12人回复

» 抢金币啦！回帖就可以得到:

查看全部散金贴

1楼 2010-12-20 10:23:06

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

pengcil

金虫 (著名写手)

应助: 2 (幼儿园)
金币: 59.9
帖子: 1501
在线: 540.6小时
虫号: 618410

iamvictorfan(金币+5):谢谢！ 2010-12-22 11:19:07

在文献中看到的，“Model Networks Of End-Linked Polydimethylsiloxane Chains .1. Comparisons Between Experimental And Theoretical Values Of Elastic-Modulus And Equilibrium Degree Of Swelling”
其实双键含量不是很高的话，减压蒸馏关系不是很大的

The polymers used in this investigation were two
samples of hydroxyl-terminated PDMS, hereafter designated
A and B, described as having molecular weights
the order of 2 x 104 and 1 xl 03 g morl , respectively. 26
Standard fractional precipitation techniquesl carried
out at 25°C were used to separate these two polymers
into several fractions. Toluene was chosen as the
solvent and acetonitrile as the nonsolvent. (Methanol,
which is widely used as the nonsolvent in polymer
fractionations, cannot be used with polymer chains of
this type, which have potentially reactive end-groups).
Initial polymer concentrations were 1wt% in the case
of sample A and 5wt% in the case of sample B. Four
fractions (A-1 through A-4) were obtained from sample
A, and two (B-1 and B-2) from sample B; each represented
roughly 20% of the polymer from which it was
obtained.

[ Last edited by pengcil on 2010-12-22 at 10:33 ]