| 查看: 1021 | 回复: 3 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
[交流]
论文摘要修改
|
|||
|
RT，论文中英文摘要如下。求英语牛人帮忙修改下，谢谢啦。 采用NaOH溶液对金刚石磨料进行了预处理，然后用硅烷偶联剂进行表面改性，并研究了用处理过的金刚石磨料制造的树脂砂轮的磨削比和磨削效率。结果表明，在干磨的条件下，处理后的金刚石磨料对砂轮磨削比的提高显著。通过显微镜观察磨削后的砂轮表面形貌，发现树脂对金刚石颗粒把持力增大，磨粒脱落较少；与仅用偶联剂处理的金刚石砂轮相比，其磨削比提高了50%。 The diamond powder was pretreated by sodium hydroxide solution and modified with silane coupling agent. The grinding ratio and grinding efficiency of wheels which were manufactured with the above treated diamond abrasive were investigated. The results indicate that the treated dimond abrasive enhances the grinding ratio of wheels observably under the dry condition. By observing the wheel surface with microscope after grinding, it can be approved that the pullout strength of resin was enhanced and less abrasive was brushed off. Compared with dimond wheels treated only with coupling agent, the diamond wheels treated with this new method have an increase of 50% on the grinding ratio. |
回复此楼» 猜你喜欢
科研求助
已经有3人回复
-
面上没中，邀请各位路过的虫友分析一下分数
已经有15人回复
-
博士去二本高校当辅导员，如何调整心态？
已经有10人回复
-
面上有专家说实验设备不是我们单位的
已经有6人回复
-
27细胞生物学申博
已经有5人回复
-
江苏省自然基金 什么时候出结果
已经有6人回复
-
广西大学-广州大学招聘博士后 欢迎广大优秀人才！！！
已经有11人回复
-
闲聊
已经有3人回复
-
两块石头
已经有10人回复
-
售SCI一区T0P文章，我:8O.55.1.O.54,科目全,可伽急
已经有15人回复
han7447
金虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 587.2
- 帖子: 108
- 在线: 20.2小时
- 虫号: 631216
- 注册: 2008-10-20
- 性别: MM
- 专业: 聚合物共混与复合材料
2楼2010-07-07 22:28:46
hust_gaoyi
金虫 (正式写手)
- 翻译EPI: 18
- 应助: 0 (幼儿园)
- 金币: 1266.1
- 沙发: 1
- 帖子: 575
- 在线: 87.7小时
- 虫号: 488206
- 注册: 2007-12-29
- 专业: 计算机软件
★
发芽土豆(金币+1):谢谢参与 2010-07-08 10:25:43
water3033(金币+15, 翻译EPI+1):谢谢啦！ 2010-07-09 13:46:23
发芽土豆(金币+1):谢谢参与 2010-07-08 10:25:43
water3033(金币+15, 翻译EPI+1):谢谢啦！ 2010-07-09 13:46:23
| The diamond powder was firstly preprocessed by sodium hydroxide solution. After surface modification with silane coupling agent, it was used to make resin wheels, the grinding ratio and grinding efficiency of which were then investigated. Experimental results indicated that the treated dimond abrasive enhanced the grinding ratio of wheels remarkably under the dry condition. The observation of the grinded wheel surface with microscope also demonstrated that the pullout strength of resin was enhanced and less abrasive brushed off. Compared with processing only by coupling agent, the proposed solution could increase 50% of the grinding ratio of diamond wheels. |
3楼2010-07-08 09:29:27
charleygan 
至尊木虫 (著名写手)
chlgan
- 翻译EPI: 99
- 应助: 496 (硕士)
- 贵宾: 0.005
- 金币: 13167.2
- 散金: 15
- 红花: 44
- 帖子: 2396
- 在线: 399.5小时
- 虫号: 859768
- 注册: 2009-09-29
- 性别: GG
- 专业: 应用高分子化学与物理
★
发芽土豆(金币+1):谢谢参与 2010-07-08 15:14:49
water3033(金币+3):谢谢啦！ 2010-07-09 13:46:43
发芽土豆(金币+1):谢谢参与 2010-07-08 15:14:49
water3033(金币+3):谢谢啦！ 2010-07-09 13:46:43
| The diamond powders are pretreated by sodium hydroxide solution and modified with silicane coupling agent. The grinding ratio and grinding efficiency of resin wheels made from the above treated diamond powders are investigated. The results indicate that the grinding ratio of wheels increases observably by treated diamond powders under the simple grinding condition. By observing the wheel surface with microscope after grinding, it shows that bonding strength between resin and diamond powders increases and abrasive worn off decreases, and the grinding ratio increases by 50% compared to the wheel made from powders treated with coupling agent only. |
4楼2010-07-08 11:01:17