24小时热门版块排行榜    

查看: 231  |  回复: 6
当前主题已经存档。
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

nandhutu

金虫 (正式写手)

[交流] 求句子翻译

1. Part of the silicon layer was masked and dry etched with SF6 gas to allow connection of the current-collector to the outside circuit.
2.The discrepancy between the two values never exceeded 20% thus indicating dense films.
3.The composition of the composites was estimated on the basis of a yield of 42% from pitch to carbon and no weight loss for graphite and silicon.
4.Milling was performed in a 45ml stainless steel grinding bowl with an O-ring seal.
5.Si powder (average particle size 80 nm) and PVA(Aldrich) or sucrose with weight ratios of silicon vs PVA or sucrose from 1:9 to 7:3 were mechanically milled for 10 h to obtain Si–polymer composites with the Si particles coated with polymer.

» 猜你喜欢

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jiaql

木虫 (正式写手)

3.The composition of the composites was estimated on the basis of a yield of 42% from pitch to carbon and no weight loss for graphite and silicon.
复合物的组成基于从沥青到碳可以达到42%的收率来估算,并且碳和硅没有重量损失。
4楼2009-05-24 17:31:52
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 7 个回答

longhua7085

至尊木虫 (著名写手)

★ ★
nandhutu(金币+2,VIP+0): 5-26 18:41
1.部分硅层被掩盖,并用SF6气体干蚀刻,能将受电器与外界电流相连。
2.两个值相差从不超过20%显示膜的致密性好。
4.在一个45ml的带有环形密封圈的不锈钢研钵中进行研磨
2楼2009-05-24 17:19:23
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

longhua7085

至尊木虫 (著名写手)


nandhutu(金币+1,VIP+0): 5-26 18:41
3.从沥青到碳有42%的产率并且石墨和硅没有质量损失,由此可以推测复合材料的组分。
5.机械研磨10h,使硅粉(平均粒径80nm)与聚乙烯醇(Aldrich)或硅粉与蔗糖的重量比从1:9变为7:3,获得硅粒子为涂层的硅高分子复合材料
3楼2009-05-24 17:28:26
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

笙歌醉梦间

铁杆木虫 (著名写手)

★ ★
nandhutu(金币+2,VIP+0): 5-26 18:41
1.硅片的一部分经掩膜后进行SF6干法刻蚀,从而使集流器能够连接到外电路上.
2.若两值的误差不超过20%,则表示膜的致密性良好.
3.因为从沥青到碳的产率是42%过程中石墨和硅没有质量损失,复合物的组成可以通过计算得到.
4.研磨在一个45ml的带有环形密封圈的不锈钢研钵中进行.
5.改变硅粉(平均粒径80nm)与聚乙烯醇(Aldrich)或硅粉与蔗糖的质量比,从1:9---7:3,采用机械研磨法,可得到硅粒子为涂层的硅/聚合物复合材料
5楼2009-05-24 17:54:47
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见