| 查看: 2434 | 回复: 102 | |||
| 当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖 | |||
[交流]
增强相分布对金属基复合材料的影响-Progress in Materials Science文章
|
|||
|
http://www.sciencedirect.com/sci ... i/S0079642515000201 《微观非均匀复合材料:增强相均匀分布最好吗?》(Microstructurally Inhomogeneous Composites: Is a homogeneous reinforcement distribution optimal?) Since the 1960s, it has been a common practice worldwide to pursue a homogeneous distribution of reinforcements within a matrix material, discontinuous metal matrix composites (DMMCs) in particular. Taking an overview of the worldwide activities in DMMC research, despite many favourable attributes such as improved specific strength, stiffness and superior wear resistance, DMMCs with a homogeneous microstructure tend to exhibit a very low room temperature damage tolerance even with a highly ductile matrix material such as aluminium. In this review, a range of uniquely multi-scale hierarchical structures have been successfully designed and fabricated by tailoring reinforcement distribution for DMMCs in order to obtain superior performance. A variety of specific microstructures that were developed in Al, Mg, Cu, Fe, Co and TiAl matrices indicate that there must be adequate plastic regions among the reinforcements to blunt or deflect cracks if one wants to toughen DMMCs. Following this path, aided by theoretical analyses, the most recent success is the design and fabrication of a network distribution of in situ reinforcing TiB whiskers (TiBw) in titanium matrix composites (TMCs), where a tailored three-dimensional (3D) quasi-continuous network microstructure displays significant improvements in mechanical properties. This resolves the brittleness surrounding TMCs fabricated by powder metallurgy. It is the large reinforcement-lean regions that remarkably improve the composite’s ductility by bearing strain, blunting the crack and decreasing the crack-propagation rate. The fracture, strengthening and toughening mechanisms are comprehensively elucidated in order to further understand the advantages of such an inhomogeneous microstructure, and to justify the development of novel techniques to produce such inhomogeneous microstructures. This approach opens up a new horizon of research and applications of DMMCs and can be easily extended to general multi-phase composites with enhanced physical and mechanical properties. Keywords: Metal matrix composites; inhomogeneous microstructure; hierarchical structures; bi-continuous microstructure; network microstructure; mechanical properties |
» 本帖附件资源列表
-
欢迎监督和反馈:小木虫仅提供交流平台,不对该内容负责。
本内容由用户自主发布,如果其内容涉及到知识产权问题,其责任在于用户本人,如对版权有异议,请联系邮箱:xiaomuchong@tal.com - 附件 1 : PMS-MIC-huang.pdf
2015-03-23 19:14:52, 13.51 M
» 本帖已获得的红花(最新10朵)
» 猜你喜欢
上海海事大学“安全科学与工程”一级学科硕士学位授予点尚有部分缺额
已经有0人回复
西京学院-结构工程-2026研究生调剂
已经有0人回复
建筑环境与结构工程论文润色/翻译怎么收费?
已经有75人回复
【广州】仲恺农业工程学院城乡建设学院土木水利专业硕士招大量调剂,线上复试
已经有0人回复
【广州】仲恺农业工程学院城乡建设学院土木水利专业硕士招大量调剂,线上复试
已经有0人回复
上海海事大学安全科学与工程学科有部分名额,欢迎调剂
已经有0人回复
土木考研调剂-08开头和计算机专业+V:18173116706
已经有0人回复
【广州】仲恺农业工程学院城乡建设学院土木水利专业硕士招大量调剂,线上复试
已经有0人回复
【广州】仲恺农业工程学院城乡建设学院土木水利专业硕士招大量调剂,线上复试
已经有0人回复
广西大学土木博士招生
已经有5人回复
E口2026重点国际合作项目
已经有2人回复
» 本主题相关商家推荐: (我也要在这里推广)
» 抢金币啦!回帖就可以得到:
北京理工大学集成电路学院-柔性电子器件与智造研究所-2027级博士招生
+1/471
中科院招聘博士后及科研助理
+2/220
威格科技:为化学合成打造全流程惰性气氛解决方案
+1/95
3-羟基丙腈(CAS:109-78-4)
+1/87
十二烷基溴化吡啶(CAS:104-73-4)
+1/84
三(三甲基硅烷)磷酸酯(CAS:10497-05-9)
+1/83
乙二醇二甲基环硅醚(CAS:57915-66-9)
+1/83
一边期待,一边忐忑:发榜前的科研人正在想什么?
+5/75
别研究filecode了,祝都有一个好结果:)
+2/74
中国石油大学(华东)计算机科学与技术学院/智能化新能源系统设计和开发方向 特聘副教
+2/32
哈工大(深圳)何自开团队诚招化学工程与技术专业博士生
+1/26
中国石油大学(华东)材料科学与工程学院/新颖能源材料智能设计和开发方向 特聘副教授
+2/25
瑞典林雪平大学 高峰课题组 诚聘 氮化物基无机材料方向 博士后1名
+1/7
福建师范大学海峡柔性电子学院-2027年9月入学博士-考核制-电催、能源
+1/7
中山大学李国强课题组招收博士生(柔性电子方向)
+1/5
Luminex多因子检测证实:USP22 抑制剂协同 GPC3 CAR-M 重塑巨噬细胞抗肿瘤炎症微环境
+1/5
天津大学张小岩教授团队招收2027级推免生(光电子能源、热管理材料与器件、微纳传感)
+1/4
夏尽秋来,蓄力沉淀,静待硕果成文
+1/4
投稿是否会先看期刊的编委名单
+1/3
北京理工大学-集成电路与电子学院杰青团队-招博士后
+1/1
86楼2015-03-23 22:24:36
简单回复
江南的竹2楼
2015-03-23 19:18
回复
aexlh(金币+1): 谢谢参与
。 [ 发自小木虫客户端 ]










回复此楼
miketyson