24小时热门版块排行榜    

查看: 492  |  回复: 3
本帖产生 1 个 翻译EPI ,点击这里进行查看

haizhoubuer

新虫 (初入文坛)

[求助] 亲们,江湖告急,求翻译啊。

Fig. 1(c) shows that the increase in the concentration of the cross-linking agent NMBA resulted in the initial increase, and then decrease of the swelling capacity of the resin. This result was observed because when the cross-linker concentration is too low, the cross-linking density of the resin would also be low, which causes the formation of a sparse three-dimensional network that facilitates water entry. Moreover, the adsorption ability decreased, and the solubility of the material increased on a macroscopic perspective, which led to a decrease in water absorbency. This decrease has direct effects on the hydrogel strength after swelling. The resin did not become an elastic gel but a colloid with low strength. The swelling ability of the resin was reduced.
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

ssssllllnnnn

至尊木虫 (知名作家)

Translator and Proofreader


【答案】应助回帖

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
haizhoubuer: 金币+15, 翻译EPI+1, ★★★★★最佳答案, 优秀 2014-10-21 22:38:26
图1(c)表明,增加交联剂NMBA的浓度一开始引起树脂溶胀力的升高,但继后降低。观察到这个结果是因为当交联剂的浓度过低,树脂的交联密度也将是低的,这将导致形成一些稀疏的三维网络,这些网络促进水的进入。此外,从宏观角度来看,吸附能力降低,以及材料的溶解度增加,会导致吸水率降低。而吸水率的降低又对溶胀后凝胶强度有直接的影响。(此种条件下)树脂并非成为一个具有弹性的凝胶,而是低强度的胶体。树脂的溶胀能力降低。

» 本帖已获得的红花(最新10朵)

2楼2014-10-16 23:33:55
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

haizhoubuer

新虫 (初入文坛)

送红花一朵
引用回帖:
2楼: Originally posted by ssssllllnnnn at 2014-10-16 23:33:55
图1(c)表明,增加交联剂NMBA的浓度一开始引起树脂溶胀力的升高,但继后降低。观察到这个结果是因为当交联剂的浓度过低,树脂的交联密度也将是低的,这将导致形成一些稀疏的三维网络,这些网络促进水的进入。此外, ...

非常感谢。
3楼2014-10-18 20:51:43
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

haizhoubuer

新虫 (初入文坛)

送红花一朵
引用回帖:
2楼: Originally posted by ssssllllnnnn at 2014-10-16 23:33:55
图1(c)表明,增加交联剂NMBA的浓度一开始引起树脂溶胀力的升高,但继后降低。观察到这个结果是因为当交联剂的浓度过低,树脂的交联密度也将是低的,这将导致形成一些稀疏的三维网络,这些网络促进水的进入。此外, ...

非常感谢。
4楼2014-10-18 20:52:11
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 haizhoubuer 的主题更新
信息提示
请填处理意见