| 查看: 7000 | 回复: 164 | ||||||||
| 【奖励】 本帖被评价143次，作者lukecana增加金币 114.6 个 | ||||||||
[资源]
2014 新书，环氧树脂与橡胶共混的微米及纳米结构（英文）
|
||||||||
|
Micro and Nanostructured Epoxy / Rubber Blends by：Sabu Thomas (Editor), Christophe Sinturel (Editor), Raju Thomas (Editor) ISBN: 978-3-527-33334-9 464 pages wiley，September 2014 Description From the liquid stage, via phase separation right up to the final network, this book covers every aspect of epoxy toughening. It provides a comprehensive review of the latest research and development in the field, explaining in detail thermal, optical, mechanical and electrical characterization methods. Chapters on ageing, failure analysis and life cycle analysis round off this invaluable text. Table of Contents Preface XV List of Contributors XVII 1 Introduction 1 Raju Thomas, Christophe Sinturel, Sabu Thomas, and Elham Mostafa Sadek El Akiaby 1.1 Epoxy Resin – Introduction 1 1.2 Cure Reactions 1 1.3 Curing Agents 2 1.3.1 Catalytic Cure 3 1.3.2 Co-reactive Cure 3 1.3.2.1 Primary and Secondary Amines 3 1.3.2.2 Mercaptans 5 1.3.2.3 Isocyanates 5 1.3.2.4 Carboxylic Acids 5 1.3.2.5 Acid Anhydrides 5 1.4 Different Curing Methods 7 1.4.1 Thermal Curing 7 1.4.2 Microwave Curing 8 1.4.3 Radiation Curing 10 1.4.3.1 Electron Beam Curing 10 1.4.3.2 Gamma Ray Irradiation 11 1.5 Curing of Epoxy Resins: Structure–Property Relationship 12 1.6 Toughening of Epoxy Resin 13 1.6.1 Different Toughening Agents 13 1.6.1.1 Liquid Elastomers for Toughening Epoxy Matrices 13 1.6.1.2 Rigid Crystalline Polymers 14 1.6.1.3 Hygrothermal Toughening Agents 14 1.6.1.4 Core–Shell Particles 14 1.6.1.5 Nanoparticles for Epoxy Toughening 15 1.6.1.6 Thermoplastic Modification of Epoxy Resin 15 1.6.1.7 Block Copolymers as Modifiers for Epoxy Resin 16 1.7 Rubber-Modified Epoxy Resin: Factors Influencing Toughening 16 1.7.1 Concentration Effects 16 1.7.2 Particle Size and Distribution of Rubber 16 1.7.3 Effect of Temperature 17 1.7.4 Effect of Rubber 17 1.7.5 Interfacial Adhesion 18 1.8 Toughening Mechanisms in Elastomer-Modified Epoxy Resins 18 1.8.1 Particle Deformation 18 1.8.2 Shear Yielding 19 1.8.3 Crazing 20 1.8.4 Simultaneous Shear Yielding and Crazing 21 1.8.5 Crack Pinning 22 1.8.6 Cavitation and Rumples 22 1.9 Quantitative Assessment of Toughening Mechanisms 23 1.10 Introduction of Chapters 24 References 25 2 Liquid Rubbers as Toughening Agents 31 Hanieh Kargarzadeh, Ishak Ahmad, and Ibrahim Abdullah 2.1 Introduction 31 2.2 Toughening of Thermoset Resins 31 2.3 Fracture Behavior of Rubber-Toughened Thermosets 32 2.4 Natural Rubbers 35 2.4.1 Preparation Method of LNR 36 2.4.1.1 Oxidation in the Presence of Redox System 36 2.4.1.2 Oxidation by Photochemical Method 37 2.4.1.3 Oxidation at High Temperatures and High Pressures 38 2.4.1.4 Oxidation by Cleavage Reagent Specific to Double Bonds 38 2.4.1.5 Metathesis Degradation 40 2.5 Liquid-Toughening Rubber in Thermoset Resins 43 2.6 Concluding Remarks 49 References 50 3 Nanostructured Epoxy Composites 53 Yuan Meng and Xinghong Zhang 3.1 Introduction 53 3.2 Preparation Methods of the Nanostructured Epoxy Thermoset 54 3.3 Morphology of the Nanostructured Epoxy Thermoset 56 3.3.1 Parameters Controlling the Morphologies 56 3.3.1.1 Blends Composition 56 3.3.1.2 The Choice of Curing Agent 58 3.3.1.3 Topological Architecture of the Copolymer 59 3.4 Microphase Separation Mechanism 60 3.4.1 Self-Assembly Mechanism 61 3.4.2 Reaction-Induced Microphase Separation Mechanism 63 3.5 Mechanical and Thermal Properties 65 3.5.1 Fracture Toughness 65 3.5.2 Glass Transition Temperature 67 3.6 Conclusions and Outlooks 67 References 68 4 Manufacture of Epoxy Resin/Liquid Rubber Blends 73 Sahrim Bin Hj Ahmad, Mimi Azlina Abu Bakar, Ying Yi, and Qi Qin 4.1 Introduction 73 4.2 Comparison of Hardeners 74 4.3 Rubber-Toughened Epoxy Resins 77 4.4 Cure Reaction Analysis 79 4.5 Conclusions 79 References 80 5 Cure and Cure Kinetics of Epoxy-Rubber Systems 83 Humberto Vázquez-Torres 5.1 Introduction 83 5.2 Cure Analysis 83 5.3 Curing Kinetics 84 5.3.1 Kinetics Analysis 85 5.3.2 Autocatalytic Model 85 5.3.3 Activation Energies 86 5.3.3.1 Dynamic Kinetics Methods 86 5.3.3.2 Isothermal Methods 87 5.4 Diffusion Factor 88 5.5 Differential Scanning Calorimetry 88 5.5.1 Dynamic DSC 89 5.5.2 Isothermal DSC 90 5.6 FTIR Spectroscopy 92 5.7 Dielectric Spectroscopy Thermal Method 94 5.8 Pressure–Volume–Temperature (PVT) Method 96 5.9 Dynamic Mechanical Analysis (DMA) and Rheological Methods 97 5.10 Conclusions 101 Acknowledgments 101 References 101 6 Theoretical Modeling of the Curing Process 105 Nicolas Boyard, Vincent Sobotka, and Didier Delaunay 6.1 Introduction 105 6.2 Modeling of the Curing Kinetics 106 6.2.1 Mechanistic Approach 107 6.2.2 Phenomenological Models Describing the Reaction 109 6.2.2.1 nth-Order Model 109 6.2.2.2 Autocatalytic Model 113 6.2.2.3 Kamal and Sourour Model 115 6.2.2.4 Bailleul Model 117 6.2.3 Rheological Models 118 6.2.3.1 Gel Time Model 118 6.2.3.2 Viscosity Model 118 6.2.4 Effect of Vitrification (Tg ) on the Reaction Rate 119 6.3 Applications of the Empirical Models 120 6.4 Conclusion 122 References 123 7 Phase-Separation Mechanism in Epoxy Resin/Rubber Blends 127 Vattikuti Lakshmana Rao and Bejoy Francis 7.1 Introduction 127 7.2 Thermodynamics of Phase Separation 128 7.2.1 Nucleation and Growth Mechanism 130 7.2.2 Spinodal Decomposition 130 7.3 Phase Separation in Uncured Epoxy Resin/Liquid Rubber Blends 131 7.4 Phase-Separation Mechanism in Cured Blends 133 7.5 Conclusion 144 References 144 8 Morphology Analysis by Microscopy Techniques and Light Scattering 147 Daohong Zhang, Junheng Zhang, and Aiqing Zhang 8.1 Introduction 147 8.2 Developments of Morphology Analysis in Rubber-Modified Epoxies 147 8.2.1 Optical Microscopy (OM) 148 8.2.2 Scanning Electron Microscopy (SEM) 150 8.2.3 Atomic Force Microscopy (AFM) 153 8.2.4 Transmission Electron Microscopy (TEM) 155 8.2.5 Small-Angle Light Scattering (SALS) 159 8.3 Different Types of Morphologies 160 8.3.1 Phase-Separation Morphology of Epoxy/Rubbers Blends 160 8.3.2 Morphology of Hybrids 161 8.3.3 Homogeneous Morphology 163 8.4 Morphology of Toughening and Reinforcing Effects 165 8.4.1 Conventional Additives 165 8.4.2 Hyperbranched Polymers 167 8.5 Conclusions 171 Acknowledgments 172 References 172 9 Pressure–Volume–Temperature (PVT) Analysis 179 Didier Delaunay, Nicolas Boyard, and Vincent Sobotka 9.1 Introduction 179 9.2 Generalities on the Behavior of the Polymers 180 9.3 Measurement Techniques 184 9.4 PvT Measures on Epoxies 187 References 190 10 Rheology of Rubber-Toughened Structural Epoxy Resin Systems 193 Richard A. Pethrick 10.1 Introduction 193 10.2 Epoxy Resin Chemistry 194 10.2.1 Basic Epoxy Chemical Reactions 195 10.2.2 Kinetics of Cure 196 10.2.3 Epoxy Reactivity 198 10.3 Modeling of the Cure Process 198 10.4 Rheological Implication of Differences in Reactivity 201 10.4.1 Modeling Rheological Behavior 202 10.4.2 Connection between Rheology and Cure 203 10.5 Rheological Studies of Cure 206 10.6 Toughened Epoxy Resins 209 10.6.1 Carboxy-Terminated Butadiene Acrylonitrile (CTBN) 210 10.6.2 Polyethersulfone (PES) 211 10.6.3 Nano Clay Toughening of Epoxy Resins 213 10.6.4 Toughening with Nano Carbon and Silica Nano Particles 213 10.6.5 Plasticization 213 10.7 Concluding Comments 214 Acknowledgments 214 References 214 11 Viscoelastic Measurements and Properties of Rubber-Modified Epoxies 219 Yingfeng Yu 11.1 Introduction 219 11.1.1 State Transitions from Liquid to Solid 220 11.1.2 Viscoelasticity of Cured Materials 222 11.2 Viscoelastic Behavior Below and Near Gel Point 224 11.2.1 Liquid-Rubber-Modified Epoxies 224 11.2.2 Core–Shell Rubber-Modified Epoxies 224 11.2.3 Ternary Systems with Fillers 228 11.3 Viscoelasticity of Cured Materials 228 11.3.1 Dynamic Mechanical Study 228 11.3.2 Dielectric Measurement 231 11.4 Other Remarks 233 11.5 Conclusion 234 References 234 12 Light, X-ray, and Neutron Scattering Techniques for Miscibility and Phase Behavior Studies in Polymer Blends 239 Chikkakuntappa Ranganathaiah 12.1 Introduction 239 12.2 Brief Theoretical Considerations of Scattering 240 12.3 Light Scattering Experiment 242 12.4 X-ray Scattering 251 12.5 Neutron Scattering 261 12.5.1 Small-Angle Neutron Scattering (SANS) 261 12.6 Conclusions and Future Outlook 267 Acknowledgments 267 References 267 13 Mechanical Properties 271 Shinu Koshy 13.1 Introduction 271 13.2 Morphology and Mechanical Properties of Rubber-Modified Epoxies 272 13.2.1 Influence of Rubber Concentration 273 13.2.2 Influence of Initial Cure Temperature 276 13.2.3 Influence of Curing Agent 278 13.2.4 Influence of Acrylonitrile Content 279 13.2.5 Influence of Strain Rate 280 13.2.6 Kerner Equation 281 13.3 Fracture Toughness 281 13.3.1 Effect of Concentration on Fracture Toughness 282 13.3.2 Effect of Strain Rate on Fracture Toughness 284 13.3.3 Effect of Curing Agent on Fracture Toughness 285 13.4 Conclusion 285 References 286 14 Thermal Properties 289 Vincent Sobotka, Didier Delaunay, Nicolas Boyard, Sabu Thomas, and Poornima Vijayan P. 14.1 Specific Heat 289 14.2 Thermal Conductivity 292 14.2.1 Main Methods of Characterization 292 14.2.1.1 Thermal Steady-State Methods 292 14.2.1.2 Thermal Transient Methods 293 14.2.2 Classical Model to Describe Thermal Conductivity as a Function of Temperature and Degree of Cure 296 14.3 Thermogravimetric Analysis of Rubber/Epoxy Systems 297 14.4 Kinetic Study from TGA 300 References 301 15 Dielectric Properties of Elastomeric Modified Epoxies 305 Yerrapragada Venkata Lakshmi Ravi Kumar, Swayampakula Kalyani, and Nidamarthy Vasantha Kumar Dutt 15.1 Introduction 305 15.2 Dielectric Study in Rubber/Epoxy Systems 306 15.2.1 Dielectric Constant (??) 306 15.2.2 Volume Resistivity (VR) 308 15.2.3 Conductivity (??) 310 15.2.4 Combined Studies on Dielectric Constant, Volume Resistivity, and Conductivity 311 15.3 Summary 312 References 312 16 Spectroscopy Analysis of Micro/Nanostructured Epoxy/Rubber Blends 315 Xiaojiang Wang and Mark D. Soucek 16.1 Introduction 315 16.2 Fourier Transform Infrared (FTIR) and Raman Spectroscopy 316 16.2.1 DGEBA Epoxy/Rubber Blends 316 16.2.2 Other Epoxy/Rubber Blends 320 16.2.3 FTIR Image and Raman Spectroscopy 322 16.3 Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) 323 16.3.1 Acid-Terminated Rubber/DGEBA Epoxy Blends 323 16.3.2 Hydroxyl-Terminated Rubber/DGEBA Epoxy Blends 326 16.3.3 Neutral Rubber/DGEBA Epoxy Blends 329 16.3.4 Other Type Epoxy/Rubber Blends 331 16.4 Other Spectroscopy 333 16.5 Summary 333 Abbreviations 334 References 334 17 Applications 339 17.1 Applications of Toughened Epoxy Resins 339 Richard A. Pethrick 17.1.1 Introduction 339 17.1.2 Aerospace Adhesive Applications 339 17.1.3 Rubber-Modified Resins 340 17.1.4 Composites 341 17.1.5 Epoxy Resin Modification 342 17.1.6 Thermoplastic Modification 343 17.1.7 Nanoparticle Modification 343 17.1.8 Other Areas of Application 343 17.2 Thermoset-Based Materials for Optical Applications Containing Azobenzene Choromophores 344 Luciana M. Sáiz, Antonela B. Orofino, María José Galante, and Patricia A. Oyanguren 17.2.1 Introduction 344 17.2.2 Synthesis and Optical Properties of Cross-linked Azo Polymers 345 17.2.2.1 Epoxy-Based Networks 345 17.2.2.2 Urethane-Based Networks 349 17.2.3 Photoaddressable Networks Containing Alkyl Compounds 354 17.2.4 Conclusions 358 References 360 18 Comparison of Epoxy/Rubber Blends with Other Toughening Strategies: Thermoplastic and Hyperbranched Modifiers 363 Gianluca Cicala 18.1 Epoxy/Thermoplastic Blends: Development and Properties 363 18.2 Epoxy/Hyperbranched Polymer Blends: Development and Properties 375 18.3 Novel Toughening Approaches for Liquid Molding Technologies 378 18.4 Rubbers as Tougheners: Comparison with Thermoplastics and Hyperbranched Modifiers 383 18.5 Conclusions 387 References 388 19 Reliability Testing 391 Marius Bâzu and Titu Bãjenescu 19.1 Introduction 391 19.2 Reliability Tests Used in Micro/Nanotechnologies 392 19.3 Behavior in Real Applications and Aging Studies of Epoxy/Rubber Blends 394 19.3.1 Epoxy/Rubber Blends Used in Packaging of Active Electronic Components 394 19.3.1.1 Molding Material 396 19.3.1.2 Adhesives 398 19.3.2 Epoxy Matrix Used in Nanocomposites 399 19.4 Conclusions 402 References 402 20 Failure Analysis 405 Marius Bâzu and Titu Bãjenescu 20.1 Introduction 405 20.2 Methods for Failure Analysis of Epoxy/Rubber Blends 405 20.3 Typical Failure Modes and Failure Mechanisms of Epoxy/Rubber Blends Used in Micro and Nanotechnologies 405 20.3.1 Mechanical Damages 409 20.3.1.1 Fracture 409 20.3.1.2 Creep 413 20.3.2 Ion Contamination 414 20.4 Self Healing 416 20.5 Conclusions 417 References 418 21 Life Cycle Assessment (LCA) of Epoxy-Based Materials 421 Jyotishkumar Parameswaranpillai and Dhanya Vijayan 21.1 Introduction to Life Cycle Assessment (LCA) 421 21.2 Significance of Life Cycle Assessment (LCA) 422 21.2.1 Goal and Scope Definition 422 21.2.2 Life Cycle Inventory Analysis 423 21.2.3 Life Cycle Impact Assessment 423 21.2.4 Life Cycle Result Interpretation 424 21.3 Life Cycle Analysis of Epoxy Systems 424 21.3.1 Life Cycle Analysis of Epoxy Resins Produced Based on Propylene and Glycerin 424 21.3.2 Life Cycle Analysis of Epoxy Resin Containing Carbon Nanotubes 426 21.3.3 Life Cycle Assessment of Wind Turbine Blade Materials 426 21.3.4 Life Cycle Assessment in Automotive Application 428 21.3.5 Life Cycle Assessment in Aerospace Application 429 21.3.6 Life Cycle Assessment of a Novel Hybrid Glass-Hemp/Thermoset Composite 429 21.3.7 Natural Fiber-Reinforced Epoxy Composites 430 21.4 Conclusion 430 References 431 Index 433 - - -  3527333347.jpg |
回复此楼» 本帖附件资源列表
-
欢迎监督和反馈：小木虫仅提供交流平台，不对该内容负责。
本内容由用户自主发布，如果其内容涉及到知识产权问题，其责任在于用户本人，如对版权有异议，请联系邮箱：xiaomuchong@tal.com - 附件 1 : 2014-Micro-_and_NanostructuredEpoxy-Rubber_Blends.rar
2014-09-19 22:04:41, 6.45 M
» 收录本帖的淘帖专辑推荐
 专业书籍（外文版）WM | 【高分子】书籍、课件、文献 | 我的文件——值得收藏 | 文献参考 |
| 远天 |
» 本帖已获得的红花（最新10朵）
爱若冰枫» 猜你喜欢
遇见不省心的家人很难过
已经有24人回复
-
依托企业入选了国家启明计划青年人才。有无高校可以引进的。
已经有6人回复
-
博士延得我，科研能力直往上蹿
已经有9人回复
-
天津大学招2026.09的博士生，欢迎大家推荐交流（博导是本人）
已经有6人回复
-
AI 太可怕了，写基金时，提出想法，直接生成的文字比自己想得深远，还有科学性
已经有6人回复
-
有院领导为了换新车，用横向课题经费买了俩车
已经有9人回复
-
酰胺脱乙酰基
已经有13人回复
-
同年申请2项不同项目，第1个项目里不写第2个项目的信息，可以吗
已经有4人回复
-
有时候真觉得大城市人没有县城人甚至个体户幸福
已经有10人回复
» 本主题相关商家推荐: (我也要在这里推广)
» 本主题相关价值贴推荐，对您同样有帮助:
- 杯芳烃结构的表征
已经有4人回复
- 2014 EES 一种核壳结构氮掺杂石墨烯-硫化物染料敏化对电极，效率10.71
已经有49人回复
- 高分子工具书——密封胶技术手册（英文版）
已经有234人回复
- 高分子入门之——聚合物流变学概论（英文版）
已经有315人回复
- 请问一下环氧树脂镶嵌以后，粉末样怎么做扫描？
已经有9人回复
- 求助硅橡胶的粉末化！!!！!！
已经有4人回复
- 请问一下做组织切片的环氧树脂胶，大家一般都在哪购买呢？求推荐哈！
已经有3人回复
- 水溶性纳米硅溶胶
已经有11人回复
- 求推荐销售多壁碳纳米管材料的公司
已经有13人回复
- 环氧树脂增韧新途径的研究与介绍
已经有6人回复
- 急求碳纤维树脂包埋后超薄切片的制样方法！
已经有7人回复
- 【求助】关于环氧树脂添加微米颗粒的分散性问题
已经有7人回复
3楼2014-09-20 07:28:06
21楼2014-09-22 18:14:26
简单回复
yehlongy2楼
2014-09-20 07:14
回复
五星好评 顶一下，感谢分享！
2014-09-20 08:15
回复
五星好评 顶一下，感谢分享！
lwg35楼
2014-09-20 09:08
回复
五星好评 顶一下，感谢分享！
hengjim6楼
2014-09-20 12:48
回复
五星好评 顶一下，感谢分享！
2014-09-20 15:45
回复
五星好评 顶一下，感谢分享！
maoistd8楼
2014-09-20 21:26
回复
五星好评 顶一下，感谢分享！
xuhu_119楼
2014-09-21 13:05
回复
五星好评 顶一下，感谢分享！
cfx1985052810楼
2014-09-21 16:14
回复
五星好评 顶一下，感谢分享！
zsj31611楼
2014-09-21 16:40
回复
五星好评 顶一下，感谢分享！
polymersdu12楼
2014-09-21 18:52
回复
五星好评 顶一下，感谢分享！
wei12shua13楼
2014-09-21 19:22
回复
五星好评 顶一下，感谢分享！
2014-09-21 22:02
回复
五星好评 顶一下，感谢分享！
xyxyyzs15楼
2014-09-22 07:30
回复
五星好评 顶一下，感谢分享！
xwj00716楼
2014-09-22 08:06
回复
五星好评 顶一下，感谢分享！
njrlfu17楼
2014-09-22 11:05
回复
五星好评 顶一下，感谢分享！
2014-09-22 11:14
回复
五星好评 顶一下，感谢分享！
高贵的狼19楼
2014-09-22 13:52
回复
五星好评 顶一下，感谢分享！
祈祷星海20楼
2014-09-22 16:18
回复
五星好评 顶一下，感谢分享！
gaochuanping22楼
2014-09-22 21:10
回复
五星好评 顶一下，感谢分享！
E_insulation23楼
2014-09-22 21:27
回复
五星好评 顶一下，感谢分享！
zch668200324楼
2014-09-23 05:55
回复
五星好评 
kingkongking25楼
2014-09-23 07:27
回复
五星好评 顶一下，感谢分享！
fdgfzzj26楼
2014-09-23 16:00
回复
五星好评 顶一下，感谢分享！
yuanling80827楼
2014-09-23 17:35
回复
五星好评 顶一下，感谢分享！
倚剑白云天28楼
2014-09-23 20:16
回复
五星好评 顶一下，感谢分享！
jonah66629楼
2014-09-24 08:42
回复
五星好评 顶一下，感谢分享！
xujianbohn30楼
2014-09-24 14:50
回复
五星好评 顶一下，感谢分享！
foreverxin31楼
2014-09-25 09:30
回复
五星好评 顶一下，感谢分享！
104943678832楼
2014-09-25 09:59
回复
五星好评 顶一下，感谢分享！
muohio89633楼
2014-09-25 11:25
回复
五星好评 顶一下，感谢分享！
鬼面敬34楼
2014-10-16 16:13
回复
三星好评 顶一下，感谢分享！
bobodlut35楼
2014-10-16 16:22
回复
五星好评 顶一下，感谢分享！
zhusiwei198436楼
2014-10-17 07:19
回复
五星好评 顶一下，感谢分享！
子夜秋风37楼
2014-10-17 07:59
回复
五星好评 顶一下，感谢分享！
秋枫8888838楼
2014-10-21 20:21
回复
五星好评 顶一下，感谢分享！
frankJJ39楼
2014-10-29 15:57
回复
五星好评 顶一下，感谢分享！
huihui31540楼
2014-10-29 22:35
回复
五星好评 顶一下，感谢分享！
沌水41楼
2014-10-30 08:21
回复
五星好评 顶一下，感谢分享！
大嘴毛毛虫42楼
2014-11-17 21:32
回复
三星好评 顶一下，感谢分享！
纵横七海43楼
2014-11-24 17:11
回复
五星好评 顶一下，感谢分享！
chx42944楼
2014-11-25 10:07
回复
五星好评 顶一下，感谢分享！
redandapple45楼
2014-12-08 09:21
回复
五星好评 顶一下，感谢分享！
gerryally46楼
2014-12-10 12:47
回复
五星好评 顶一下，感谢分享！
zangjianone47楼
2014-12-20 11:08
回复
五星好评 顶一下，感谢分享！
fuhuidong48楼
2014-12-31 09:03
回复
五星好评 顶一下，感谢分享！
南回归线49楼
2015-01-01 18:26
回复
五星好评 顶一下，感谢分享！
高fs50楼
2015-01-02 14:59
回复
五星好评 顶一下，感谢分享！