应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台 » 计算模拟区 » 第一性原理 » Vasp&MedeA » 求助，VASP5.3.5的编译
51/1返回列表
查看: 1498  |  回复: 4
只看楼主@他人 存档 新回复提醒 (忽略) 收藏    在APP中查看
当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖

porominix

银虫 (小有名气)

[求助] 求助，VASP5.3.5的编译已有2人参与

周四（11号）的时候编译的。cp makefile.linux_ifc_P4 makefile 之后，我没对makefile做任何修改，就make了。编译了几分钟之后出现以下报错，终止：

ifort: error #10236: File not found:  '/lib/intel64/libmkl_intel_lp64.a'

于是我搜了一下含有这个文件名的字行，总共有3行，其中两行的行首是有#号的：

# BLAS= -Wl,--start-group $(MKL_PATH)/libmkl_intel_lp64.a $(MKL_PATH)/libmkl_intel_thread.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -lguide
LAPACK= $(MKL_PATH)/libmkl_intel_lp64.a
#LAPACK= /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_lp64.a

我的做法是把那一行没有#号的也加上#号，然后再次make。

这次没有什么报错了，编译顺利完成。不过我把处理过程跟老师邮件汇报之后，老师说我这样编译不太正确。老师这三天一直有事务要忙，所以我只好先在这儿贴出来，期望能有已经安装好5.3.5的大神教予正确的方法，不胜感激！
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐，对您同样有帮助:
1楼2014-09-14 16:32:00
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

xujc1983

木虫 (著名写手)

苦逼青椒一枚
没有很仔细看，但问题是绝对有的
并且，你没有用MPI并行编译，这样编译出来的VASP即使可以正常运算也只能一个核来计算，效率很低
至于并行编译，不清楚你的情况，不过看该makefile的情况，可能你的openmpi安装也会有问题
赞一下 回复此楼
5楼2014-09-15 08:25:49
 已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 5 个回答

porominix

银虫 (小有名气)
以下是makefile.linux_ifc_P4的内容：

.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron
# based systems
# we recommend this makefile for both Intel as well as AMD systems
# for AMD based systems appropriate BLAS (libgoto) and fftw libraries are
# however mandatory (whereas they are optional for Intel platforms)
# For Athlon we recommend
#  ) to link against libgoto (and mkl as a backup for missing routines)
#  ) odd enough link in libfftw3xf_intel.a (fftw interface for mkl)
# feedback is greatly appreciated
#
# The makefile was tested only under Linux on Intel and AMD platforms
# the following compiler versions have been tested:
#  - ifc.7.1  works stable somewhat slow but reliably
#  - ifc.8.1  fails to compile the code properly
#  - ifc.9.1  recommended (both for 32 and 64 bit)
#  - ifc.10.1 partially recommended (both for 32 and 64 bit)
#             tested build 20080312 Package ID: l_fc_p_10.1.015
#             the gamma only mpi version can not be compiles
#             using ifc.10.1
#  - ifc.11.1 partially recommended (some problems with Gamma only and intel fftw)
#             Build 20090630 Package ID: l_cprof_p_11.1.046
#  - ifort.12.1 strongly recommended (we use this to compile vasp)
#             Version 12.1.5.339 Build 20120612
#
# it might be required to change some of library path ways, since
# LINUX installations vary a lot
#
# Hence check ***ALL*** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
#   retrieve the lapackage from ftp.netlib.org
#   and compile the blas routines (BLAS/SRC directory)
#   please use g77 or f77 for the compilation. When I tried to
#   use pgf77 or pgf90 for BLAS, VASP hang up when calling
#   ZHEEV  (however this was with lapack 1.1 now I use lapack 2.0)
# 2) more desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)
#     http://developer.intel.com/software/products/mkl/
#   this is really excellent, if you use Intel CPU's
#
# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,
#     around 30 GFlops on Quad core)
#   Kazushige Goto's BLAS
#   http://www.cs.utexas.edu/users/kgoto/signup_first.html
#   http://www.tacc.utexas.edu/resources/software/
#
#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f90
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=ifort
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
#  CPP_   =  /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
#  CPP_   =  /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
#  SUSE X.X, maybe some Red Hat distributions:

CPP_ =  ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

# this release should be fpp clean
# we now recommend fpp as preprocessor
# if this fails go back to cpp
CPP_=fpp -f_com=no -free -w0 $*.F $*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf             charge density   reduced in X direction
# wNGXhalf            gamma point only reduced in X direction
# avoidalloc          avoid ALLOCATE if possible
# PGF90               work around some for some PGF90 / IFC bugs
# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn                 MD package of Tomas  Bucko
#-----------------------------------------------------------------------

CPP     = $(CPP_)  -DHOST=\"LinuxIFC\" \
          -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \
#          -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# general fortran flags  (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------

FFLAGS =  -FR -names lowercase -assume byterecl

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK  SSE1 optimization,  but also generate code executable on all mach.
#       xK improves performance somewhat on XP, and a is required in order
#       to run the code on older Athlons as well
# -xW   SSE2 optimization
# -axW  SSE2 optimization,  but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------

# ifc.9.1, ifc.10.1 recommended
OFLAG=-O2 -ip  

OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG  = -FR -O0
INLINE = $(OFLAG)

#-----------------------------------------------------------------------
# the following lines specify the position of BLAS  and LAPACK
# we recommend to use mkl, that is simple and most likely
# fastest in Intel based machines
#-----------------------------------------------------------------------

# mkl path for ifc 11 compiler
#MKL_PATH=$(MKLROOT)/lib/em64t

# mkl path for ifc 12 compiler
MKL_PATH=$(MKLROOT)/lib/intel64

MKL_FFTW_PATH=$(MKLROOT)/interfaces/fftw3xf/

# BLAS
# setting -DRPROMU_DGEMV  -DRACCMU_DGEMV in the CPP lines usually speeds up program execution
# BLAS= -Wl,--start-group $(MKL_PATH)/libmkl_intel_lp64.a $(MKL_PATH)/libmkl_intel_thread.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -lguide
# faster linking and available from at least version 11
BLAS= -lguide  -mkl


# LAPACK, use vasp.5.lib/lapack_double

#LAPACK= ../vasp.5.lib/lapack_double.o

# LAPACK from mkl, usually faster and contains scaLAPACK as well

LAPACK= $(MKL_PATH)/libmkl_intel_lp64.a

# here a tricky version, link in libgoto and use mkl as a backup
# also needs a special line for LAPACK
# this is the best thing you can do on AMD based systems !!!!!!

#BLAS =  -Wl,--start-group /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_thread.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group  -liomp5
#LAPACK= /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_lp64.a

#-----------------------------------------------------------------------

LIB  = -L../vasp.5.lib -ldmy \
     ../vasp.5.lib/linpack_double.o $(LAPACK) \
     $(BLAS)

# options for linking, nothing is required (usually)
LINK =

#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------

FFT3D   = fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D   = fftw3d.o fft3dlib.o   /opt/libs/fftw-3.1.2/lib/libfftw3.a

# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D   = fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_intel.a
#INCS = -I$(MKLROOT)/include/fftw

#=======================================================================
# MPI section, uncomment the following lines until
#    general  rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------

#FC=mpif90
#FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf             charge density   reduced in Z direction
# wNGZhalf            gamma point only reduced in Z direction
# scaLAPACK           use scaLAPACK (recommended if mkl is available)
# avoidalloc          avoid ALLOCATE if possible
# PGF90               work around some for some PGF90 / IFC bugs
# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn                 MD package of Tomas  Bucko
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------

#CPP    = $(CPP_) -DMPI  -DHOST=\"LinuxIFC\" -DIFC \
#     -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \
#     -DMPI_BLOCK=8000 -Duse_collective -DscaLAPACK
##    -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave this section commented out
#-----------------------------------------------------------------------

# usually simplest link in mkl scaLAPACK
#BLACS= -lmkl_blacs_openmpi_lp64
#SCA= $(MKL_PATH)/libmkl_scalapack_lp64.a $(BLACS)

#-----------------------------------------------------------------------
# libraries
#-----------------------------------------------------------------------

#LIB     = -L../vasp.5.lib -ldmy  \
#      ../vasp.5.lib/linpack_double.o \
#      $(SCA) $(LAPACK) $(BLAS)

#-----------------------------------------------------------------------
# parallel FFT
#-----------------------------------------------------------------------

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
#FFT3D   = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D   = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o  /opt/libs/fftw-3.1.2/lib/libfftw3.a

# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D   = fftmpiw.o fftmpi_map.o  fftw3d.o  fft3dlib.o   $(MKL_FFTW_PATH)/libfftw3xf_intel.a
#INCS = -I$(MKLROOT)/include/fftw

#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC=   symmetry.o symlib.o   lattlib.o  random.o   


SOURCE=  base.o     mpi.o      smart_allocate.o      xml.o  \
         constant.o jacobi.o   main_mpi.o  scala.o   \
         asa.o      lattice.o  poscar.o   ini.o  mgrid.o  xclib.o  vdw_nl.o  xclib_grad.o \
         radial.o   pseudo.o   gridq.o     ebs.o  \
         mkpoints.o wave.o     wave_mpi.o  wave_high.o  spinsym.o \
         $(BASIC)   nonl.o     nonlr.o    nonl_high.o dfast.o    choleski2.o \
         mix.o      hamil.o    xcgrad.o   xcspin.o    potex1.o   potex2.o  \
         constrmag.o cl_shift.o relativistic.o LDApU.o \
         paw_base.o metagga.o  egrad.o    pawsym.o   pawfock.o  pawlhf.o   rhfatm.o  hyperfine.o paw.o   \
         mkpoints_full.o       charge.o   Lebedev-Laikov.o  stockholder.o dipol.o    pot.o \
         dos.o      elf.o      tet.o      tetweight.o hamil_rot.o \
         chain.o    dyna.o     k-proj.o    sphpro.o    us.o  core_rel.o \
         aedens.o   wavpre.o   wavpre_noio.o broyden.o \
         dynbr.o    hamil_high.o  rmm-diis.o reader.o   writer.o   tutor.o xml_writer.o \
         brent.o    stufak.o   fileio.o   opergrid.o stepver.o  \
         chgloc.o   fast_aug.o fock_multipole.o  fock.o  mkpoints_change.o sym_grad.o \
         mymath.o   internals.o npt_dynamics.o   dynconstr.o dimer_heyden.o dvvtrajectory.o subdftd3.o \
         vdwforcefield.o nmr.o      pead.o     subrot.o   subrot_scf.o  paircorrection.o \
         force.o    pwlhf.o    gw_model.o optreal.o  steep.o    davidson.o  david_inner.o \
         electron.o rot.o  electron_all.o shm.o    pardens.o  \
         optics.o   constr_cell_relax.o   stm.o    finite_diff.o elpol.o    \
         hamil_lr.o rmm-diis_lr.o  subrot_cluster.o subrot_lr.o \
         lr_helper.o hamil_lrf.o   elinear_response.o ilinear_response.o \
         linear_optics.o \
         setlocalpp.o  wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \
         gauss_quad.o m_unirnk.o minimax_tabs.o minimax.o \
         mlwf.o     ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o \
         local_field.o ump2.o ump2kpar.o fcidump.o ump2no.o \
         bse_te.o bse.o acfdt.o chi.o sydmat.o \
         lcao_bare.o wnpr.o dmft.o \
         rmm-diis_mlr.o  linear_response_NMR.o wannier_interpol.o linear_response.o  auger.o getshmem.o \
         dmatrix.o

vasp: $(SOURCE) $(FFT3D) $(INC) main.o
        rm -f vasp
        $(FCL) -o vasp main.o  $(SOURCE)   $(FFT3D) $(LIB) $(LINK)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
        $(FCL) -o makeparam  $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
        $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
        $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
        $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
        $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:       
        -rm -f *.g *.f *.o *.L *.mod ; touch *.F

main.o: main$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
        $(CPP)
        $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F
        $(CPP)
        $(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
        $(CPP)
$(SUFFIX).o:
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules
#-----------------------------------------------------------------------
# these special rules have been tested for ifc.11 and ifc.12 only

fft3dlib.o : fft3dlib.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
fft3dfurth.o : fft3dfurth.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
fftw3d.o : fftw3d.F
        $(CPP)
        $(FC) -FR -lowercase -O1 $(INCS) -c $*$(SUFFIX)
fftmpi.o : fftmpi.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
fftmpiw.o : fftmpiw.F
        $(CPP)
        $(FC) -FR -lowercase -O1 $(INCS) -c $*$(SUFFIX)
wave_high.o : wave_high.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
# the following rules are probably no longer required (-O3 seems to work)
wave.o : wave.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
paw.o : paw.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
cl_shift.o : cl_shift.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
us.o : us.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
LDApU.o : LDApU.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
赞一下 回复此楼
2楼2014-09-14 17:08:40
 已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

busstop

禁虫 (小有名气)
★ ★ ★ ★ ★ ★
感谢参与，应助指数 +1
liliangfang: 金币+1, 谢谢交流 2014-09-15 07:51:19
porominix: 金币+5, ★★★很有帮助 2014-09-15 08:50:32
本帖内容被屏蔽
3楼2014-09-14 19:57:43
 已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

gaarakingBMY

铜虫 (初入文坛)

【答案】应助回帖

★
感谢参与，应助指数 +1
liliangfang: 金币+1, 谢谢交流 2014-09-15 07:51:32
引用回帖:
2楼: Originally posted by porominix at 2014-09-14 17:08:40
以下是makefile.linux_ifc_P4的内容：

.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for Pentium/Athlon/O ...

你的mkl_path路径需要 添加一个你系统中放mkl的路径-L+你的路径。
赞一下 回复此楼
4楼2014-09-14 21:34:40
 已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 5 个回答
普通表情 龙 兔 虎 猫
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[硕博家园] 博士该不该读？ +7 L1009225316 2024-06-25 7/350 2024-06-26 15:43 by sixbxuwbjz12
[基金申请] 博后网上办公系统维护 +11 取名字烦人 2024-06-25 16/800 2024-06-26 15:42 by helenlee1997
[基金申请] 博后面上今天下午会公布吗？有无消息？ +26 hajkdfdf 2024-06-24 42/2100 2024-06-26 15:34 by helenlee1997
[基金申请] 要持续整治滥发“帽子”、“牌子”之风 +6 babu2015 2024-06-25 6/300 2024-06-26 14:52 by felicity6056
[硕博家园] 难道我真的要放弃吗？ +42 133456 2024-06-20 44/2200 2024-06-26 12:32 by lyfbangong
[有机交流] 过柱子，产品，杂质在是 pe:ea=100:1 也一起出来？ +5 w256 2024-06-25 5/250 2024-06-26 09:31 by 小木木cc
[基金申请] 专科院校申请国自然 +14 孤单12站 2024-06-24 20/1000 2024-06-26 09:09 by chong2024
[论文投稿] 我在写关于多维空间的论文，希望能与大家交流，准备在science上发表 +7 lgf519 2024-06-24 9/450 2024-06-26 08:29 by xxxxxxOdis
[硕博家园] 考博英语 +5 198新用户 2024-06-25 10/500 2024-06-26 08:09 by 地狱伞兵
[基金申请] 基金申请书名称有变化 +5 xuel2011 2024-06-25 7/350 2024-06-26 00:07 by 老虎当猫养
[考博] 申博好难 +6 自强不息a?a 2024-06-24 6/300 2024-06-25 23:02 by 考研吒儿
[基金申请] 能看出是否上会了吗 +10 articlefan 2024-06-23 15/750 2024-06-25 16:05 by 请慎重修改昵称
[第一性原理] Vasp 版权问题 10+4 竹叶青9 2024-06-22 5/250 2024-06-25 14:58 by 无所谓109
[基金申请] 演员杨幂在核心期刊发表论文，中国广播电视学期刊 +9 babu2015 2024-06-22 12/600 2024-06-25 11:05 by 我是勇敢牛牛
[有机交流] 求助析晶问题 20+4 dengdawang 2024-06-24 5/250 2024-06-24 21:22 by cc116
[基金申请] 博后面上和特助今天出吗？ +41 逗您玩 2024-06-21 77/3850 2024-06-24 09:47 by weichuny
[基金申请] 国产期刊影响因子大于12的有20多个个了 +17 babu2015 2024-06-20 22/1100 2024-06-23 13:12 by 德尚中行
[基金申请] 工材口青年基金大概什么样能上会？ +15 今晚推荐22 2024-06-20 21/1050 2024-06-22 23:04 by qbn0326
[论文投稿] ACS 编辑的意见 10+3 哈哈妞1993 2024-06-20 3/150 2024-06-21 17:06 by 投个论文
[论文投稿] 投稿求助 +4 平凡的日子 2024-06-19 5/250 2024-06-20 16:24 by yueyueyue@
信息提示
关闭
请填处理意见
关闭