| 查看: 449 | 回复: 1 | ||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | ||
[求助]
求大神翻译一小段英语、急急急!!!
|
||
|
The AZT and AZTn samples (samples “1”) were sintered in air at 1650 °C with a holding time of 2 h. In order to determine suitable thermal conditions for the formation of aluminum titanate (samples “2”), the green bodies prepared from the Al2O3/TiO2 powder mixture were heat-treated in air at two different temperatures (1500 °C and 1650 °C) and holding times (2 h and 4 h). The crystalline phase content in the heat-treated samples was analyzed by X-ray diffraction. Based on the results, which will be presented in the “Results and Discussion” section, 1650 °C and 4 h holding time were chosen for the synthesis of Al2TiO5. The same temperature and holding time were used for sintering the spinel samples containing pre-synthesized Al2TiO5 and the pure spinel samples (samples “3”). For investigating their resistance to thermal shock, the sintered AZT, AZTn, and spinel samples were heated for 15 min at 950 °C, 1150 °C, or 1200 °C and then quenched by plunging in water which had a temperature of 25 °C. The mechanical strength of as-sintered samples and of samples after one and after five quenching cycles were measured by three-point bending tests (testing instrument TIRAtest 2420, Germany). |
回复此楼» 猜你喜欢
售SCI一区T0P文章，我:8O.55.1.O.5.4,科目齐全,可+急
已经有5人回复
-
售SCI-T0P文章，我:8O.5.5.1.O.54,科目齐全,可+急
已经有7人回复
-
上海工程技术大学 激光智能制造课题组 2027级博士研究生招生
已经有6人回复
-
课题组招2027级博士 上海工程技术大学 激光智能制造方向
已经有6人回复
-
现代”学阀”该如何界定
已经有14人回复
-
师弟论文见刊大半年才想起来申请专利，还能抢救一下吗？
已经有4人回复
-
有机合成以后会不会被AI改变？做科研的虫友怎么看
已经有8人回复
-
我的奶奶
已经有3人回复
cmds1907
铁杆木虫 (著名写手)
- 翻译EPI: 73
- 应助: 72 (初中生)
- 金币: 10944.8
- 散金: 3999
- 红花: 17
- 帖子: 2100
- 在线: 531.7小时
- 虫号: 3346786
- 注册: 2014-07-31
- 专业: 有机分子功能材料化学
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★
根本停不下: 金币+10, 翻译EPI+1, ★有帮助 2014-09-14 14:39:49
根本停不下: 金币+10, 翻译EPI+1, ★有帮助 2014-09-14 14:39:49
|
AZT和AZTn样品(样品“1”) 的烧结是在空气中1650°C和保持时间2小时。 为了确定形成钛酸铝(样本“2”) 合适的热条件，从氧化铝/二氧化钛粉末混合物制备生坯(未烧试样)，在空气中以两种不同温度(1500°C和1650°C)热处理且保持时间(2 h和4 h)。热处理样品的结晶相含量由X射线衍射分析(确定)。基于这些结果，它将在“结果与讨论”部分呈现，1650°C和4h保持时间被选择做Al2TiO5的合成。 同样的温度和保持时间被用于烧结含预合成Al2TiO5的尖晶石样品和纯尖晶石样品(样品“3”)。 为研究他们的抗热冲击，烧结的AZT，AZTn和尖晶石样品在950°C、1150°C和1200°C加热15分钟，然后浸入25°C水中淬火。该烧结样品和1和5淬火周期后样品的机械强度，由三点弯曲试验(测试仪器TIRAtest 2420，德国) 测量。 |
2楼2014-09-14 14:31:23