24小时热门版块排行榜    

查看: 1477  |  回复: 35

foolyc

铜虫 (小有名气)

引用回帖:
19楼: Originally posted by pkzoo at 2013-07-06 15:46:14
我后悔硕士没有去做故障诊断或者建模,因为老师的课题,做了个适航,萨比不?现在根本就光知道控制原理。。...

淡定,兄弟
还有博士阶段呢,那你现在在做什么?
祖国的航空发动机都没上天,你还有心思睡觉?
21楼2013-07-07 20:22:15
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

pkzoo

新虫 (初入文坛)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
21楼: Originally posted by foolyc at 2013-07-07 20:22:15
淡定,兄弟
还有博士阶段呢,那你现在在做什么?...

不读了,没机遇了。
两篇sci,工科真要命
22楼2013-07-08 11:55:09
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

foolyc

铜虫 (小有名气)

引用回帖:
22楼: Originally posted by pkzoo at 2013-07-08 11:55:09
不读了,没机遇了。
两篇sci,工科真要命...

在工作?
两篇SCI。。。做发动机气动方向的。。感觉他们更难发SCI,做控制方向是不是会稍好些?
祖国的航空发动机都没上天,你还有心思睡觉?
23楼2013-07-08 14:18:53
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

淡泊学人

新虫 (正式写手)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
16楼: Originally posted by wangyichen_q at 2013-06-05 01:34:34
我到博士接触这个课题才开始对控制系统和发动机性能有点儿了解,你已经相当不错了,我开始学这个才半年左右...

请问前辈这个方向行情怎么样啊,谢谢!!
24楼2013-08-31 21:47:29
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

淡泊学人

新虫 (正式写手)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
22楼: Originally posted by pkzoo at 2013-07-08 11:55:09
不读了,没机遇了。
两篇sci,工科真要命...

前辈的意思是   发动机控制很难发文吗
25楼2013-09-01 09:02:43
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
26楼2013-09-03 17:10:04
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wangyichen_q

新虫 (小有名气)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
20楼: Originally posted by pkzoo at 2013-07-06 15:47:48
你在国外哪个学校?还有专门研究航发控制的专业?...

Cranfield, my supervisor is doing diagnostic. However, he is interested in the model base control (or fault tolerant control) aspect. So my project is doing the transient engine and control system simulation
27楼2013-09-06 22:04:56
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wangyichen_q

新虫 (小有名气)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
24楼: Originally posted by 淡泊学人 at 2013-08-31 21:47:29
请问前辈这个方向行情怎么样啊,谢谢!!...

It is really a good searching area as the performance is relating to the control and diagnostic and prognostic. However, as such areas all need excellent ability and understanding on math algorithm, it is really difficult to get some special achivement
28楼2013-09-06 22:10:44
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wangyichen_q

新虫 (小有名气)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
11楼: Originally posted by foolyc at 2013-06-05 01:12:26
容积效应用于建模不是考虑气体的“缓冲”,从而不用解那几个约束么?
这个用在控制系统上,还是不太懂你这个容积效应用在控制系统上时啥意思?...

In the inter-component volume method, the idea is that the variation of the fuel flow rate injected into the combustor will cause the variation of the difference between the inlet and outlet mass flow rate at each time step. This will produce the variation of the volume pressure. This pressure will be used in the compressor map interpolation to find the next step mass flow rate and repeat the process again until no variation of the fuel flow rate injection. The same idea can be used on fuel system simulation also.
29楼2013-09-06 22:33:06
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

淡泊学人

新虫 (正式写手)


小木虫: 金币+0.5, 给个红包,谢谢回帖
引用回帖:
29楼: Originally posted by wangyichen_q at 2013-09-06 22:33:06
In the inter-component volume method, the idea is that the variation of the fuel flow rate injected into the combustor will cause the variation of the difference between the inlet and outlet mass fl ...

如果我不想和膨胀做功这些东西相关,有什么这方面的研究吗?我看了就是检测透平/压气机叶片的裂纹,腐蚀,积垢,很没意思
30楼2013-09-07 19:34:42
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 foolyc 的主题更新
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见