24小时热门版块排行榜    

CyRhmU.jpeg
查看: 2796  |  回复: 11
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

菲顶顶

铜虫 (正式写手)

[求助] castep 计算properties的问题(请大家帮忙了,感激不尽)

想问问大家,
问题一:   
    我到底是在优化的时候同时选上态密度和能带结构同时计算,
    还是优化完以用有优化好的结构task选energy,选项卡properties勾选态密度和带结构计算啊?
问题二:
   用task选energy,然后选项卡property选态密度和带结构计算
   和在task里选properties,然后再properties里勾选态密度和带结构。
   到底这两个properties有什么区别啊,好像两种计算出来的结果不一样?有什么不一样呢?
   我用两种计算了同一结构,结果却出现了问题,为什么都出现问题了,第一个貌似可以改,可以解决,但第二个还像是说电脑运行不起来,承受不了,这是为什么,我该怎么处理啊:
非常感谢大家!!!
    1.用task选energy,然后选项卡property选态密度和带结构计算的,计算完成后任务失败了,在castep文件下出现了如下warning,
Warning: There are no empty bands for at least one kpoint and spin; this may
                slow the convergence and/or lead to an inaccurate groundstate.
                If this warning persists, you should consider increasing nextra_bands
               and/or reducing smearing_width in the param file.
               Recommend using nextra_bands of 7 to 15.   
    而且我查了param文件,里面nextra_bands为4,但是不知道这个值在哪里改 没有找到,在哪里可以改呢?
  smearing_width我已经是0.01了是最小,我在electronic-more-SCF选项下改的,如果我改成0.005他就会提示我:value is invalid for property smearing(range is 0.01----10.0),这个是已经改不了了啊。
请大家帮忙看一下
    2.我也试了在task里选properties,然后再properties里勾选态密度和带结构,但是总是失败,出现如下提醒:
  The memory required for this calculation exceeds machine capacity.
           Unable to continue. Run will be ABORTED.
    Suggestions:
      Check the run setup is reasonable; in particular cell dimensions,
      number of atoms, plane wave cutoff all affect memory consumption.
      Investigate the parameters "opt_strategy"/"opt_strategy_bias" and
      "page_wvfns" which may be used to reduce memory requirements.
      If the calculation is being run on a distributed memory computer
      consider increasing the number of processors.
      It may be necessary to run this calculation on another computer
      with more RAM or upgrade the physical RAM on the current system.

[ Last edited by 菲顶顶 on 2012-10-30 at 16:07 ]
回复此楼

» 收录本帖的淘帖专辑推荐

计算材料帖子整理

» 猜你喜欢

» 本主题相关价值贴推荐,对您同样有帮助:

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

aaq2800

铁杆木虫 (知名作家)

第2个问题不就是内存不够用了呗,第一个俺也不明白怎么回事,俺一般都是结构优化后再算性质
5楼2012-10-31 08:20:46
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 12 个回答

ljyang320

木虫 (正式写手)

小书虫爱吃糖

引用回帖:
2楼: Originally posted by 安德 at 2012-10-30 16:46:13
帮顶

试试吧 smearing_width改为0.05
然后循环次数从100变到500
但使岁月静好,现世安稳!
3楼2012-10-30 16:54:54
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

菲顶顶

铜虫 (正式写手)

引用回帖:
3楼: Originally posted by ljyang320 at 2012-10-30 16:54:54
试试吧 smearing_width改为0.05
然后循环次数从100变到500...

还是出现了同样的warning
4楼2012-10-30 19:36:20
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

菲顶顶

铜虫 (正式写手)

引用回帖:
5楼: Originally posted by aaq2800 at 2012-10-31 08:20:46
第2个问题不就是内存不够用了呗,第一个俺也不明白怎么回事,俺一般都是结构优化后再算性质

我也是用优化好的结构算的
6楼2012-10-31 09:02:16
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
信息提示
请填处理意见