24小时热门版块排行榜    

查看: 772  |  回复: 4

qhd511

铁杆木虫 (著名写手)

[求助] 一段自己翻译的化学实验操作,请英语地道的专家润色,谢谢!

自己翻译的,水平比较差,有中文对照,请帮我润色,谢绝电脑翻译!

10 mL C was added. Mix to keep C in contact with the sample fully. Then put it into the instrument (The 50 mL colorimetric tube might be placed in a 1000 mL breaker whose liquid level was higher than it in order to avoid fallen down). All the extraction times were 30 min. During the 15th min, the colorimetric tube was taken out and shaken upside down in order to make the sample in the bottom of the tube sufficient contact with C. The sample in the colorimetric tube was filtered into another 50 mL colorimetric tube through mid-speed qualitative filter paper which was immersed in C beforehand (a small amount of N was previously covered on the filter paper). The final solution volume was kept at 50mL with C. After 15 min, adding 5g of m to absorb o in the samples, shaking up and standing before the solution became clarification. The supernatant was used for the determination of o.

加入10mL C,盖紧塞子,颠倒摇晃使样品与C充分接触,放入仪器中(注:为避免比色管倒到仪器水槽中,可将比色管先放入装有适量水的1000mL烧杯中,使烧杯内水的液面高于比色管中C的液面),总共萃取30min。在第15min时取出比色管,颠倒摇晃,使沉入管底样品与C充分接触。萃取完成后取出比色管,充分摇匀后将样品用经过C浸泡的中速定性滤纸(事先加少量N在滤纸上)过滤至50mL比色管中,用5mL C小心洗涤比色管,将洗涤液转移至玻璃漏斗中,过滤完毕用5mL C洗涤漏斗。然后用C定容至刻度,摇匀。
放置15min后,用漏斗加入5g m,摇匀后静置至溶液澄清,用上清液测定o。

» 收录本帖的淘帖专辑推荐

精品翻译集锦

» 猜你喜欢

已阅   关注TA 给TA发消息 送TA红花 TA的回帖
sltmac: 编辑内容 2012-06-10 10:04
~~

[ Last edited by sltmac on 2012-6-10 at 10:04 ]
2楼2012-06-09 21:39:07
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

qhd511

铁杆木虫 (著名写手)

引用回帖:
2楼: Originally posted by knifebt at 2012-06-09 21:39:07

请不要发无关回复的内容,谢谢!
3楼2012-06-09 22:14:27
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

qhd511

铁杆木虫 (著名写手)

请8814402专家帮我润色,谢谢!
4楼2012-06-12 09:11:20
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

8814402

至尊木虫 (职业作家)

不好意思,请参考类似的文章仿写吧。我不是很清楚你的操作过程,你的中文和英文对事实的描述都不是很明白
5楼2012-06-13 07:51:12
已阅   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 qhd511 的主题更新
信息提示
请填处理意见