| 查看: 1240 | 回复: 2 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | |||
[求助]
英译汉
|
|||
| Ti-6Al-4V is a commonly used titanium base alloy in aerospace applications. The increasing demand for damage-tolerant designs of such components necessitates a detailed knowledge of its crack growth behavior. The aim of this research was the characterization and phenomenological modeling of long crack growth behavior with respect to microstructure and stress ratio. Therefore, the long crack propagation was characterized for eight different heat treatment conditions and four stress ratios. For comparison,physically short crack growth tests were also performed. The long crack growth threshold was found to be dominated by roughness-induced crack closure, and the fracture surface roughness is controlled by the primary -grain size. The reason for this correlation is a near-threshold crack propagation mode,which is dominated by the transcrystalline fracture of -grains. This correlation was used to model the crack growth threshold with respect to microstructure. A linear relation was determined between the stress ratio and the threshold value, which was also found in this approach. Further presented models cover the crack growth behavior in the near-threshold (Stage I) and mid-growth rate regions (Stage II). |
回复此楼» 猜你喜欢
自荐读博
已经有5人回复
-
求个博导看看
已经有16人回复
-
上海工程技术大学张培磊教授团队招收博士生
已经有4人回复
-
上海工程技术大学【激光智能制造】课题组招收硕士
已经有5人回复
-
求助院士们，这个如何合成呀
已经有4人回复
-
临港实验室与上科大联培博士招生1名
已经有9人回复
-
需要合成515-64-0，50g，能接单的留言
已经有4人回复
-
写了一篇“相变储能技术在冷库中应用”的论文，论文内容以实验为主，投什么期刊合适？
已经有6人回复
-
带资进组求博导收留
已经有10人回复
-
最近几年招的学生写论文不引自己组发的文章
已经有11人回复
wxb0626
木虫 (正式写手)
- 翻译EPI: 16
- 应助: 2 (幼儿园)
- 金币: 4206.8
- 红花: 1
- 帖子: 406
- 在线: 403.9小时
- 虫号: 812014
- 注册: 2009-07-19
- 性别: GG
- 专业: 环境化工
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
lidongze(金币+20, 翻译EPI+1): 2012-03-09 19:03:33
lidongze(金币+20, 翻译EPI+1): 2012-03-09 19:03:33
| Ti-6Al-4V 是一种在航天领域中常用的钛基合金。对这种合金成分耐损伤设计日益增长的需求使得了解其裂痕增长行为的详细知识成为必要。本研究的目的是对与微观结构和应力比相关的长裂痕的增长行为进行表征及建立唯象模型。因此，使用了八种不同的热处理条件和四个应力比对裂纹增长进行了表征。为了便于比较，还进行了物理短裂纹增长测试，发现长裂痕增长的阀值由粗糙度诱发的裂纹闭合主导，断裂表面的粗糙度受初生晶粒尺寸控制。存在这种相关性的原因是一种近门槛区的裂纹扩展模式，这种模式是由晶粒的穿晶断裂主导。这种相关性被用来对与微观结构有关的裂纹增长阀值建模。在这种近似中还发现应力比和阀值之间存在线形关系。进一步提出了涵盖近门槛区的裂纹增长行为（第1阶段）和中等增长速率区域（第2阶段）的裂纹增长行为的模型。 |
3楼2012-03-09 14:43:31
2楼2012-03-09 11:11:23