| 查看: 1520 | 回复: 2 | ||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | ||
[求助]
英译汉
|
||
| Ti-6Al-4V is a commonly used titanium base alloy in aerospace applications. The increasing demand for damage-tolerant designs of such components necessitates a detailed knowledge of its crack growth behavior. The aim of this research was the characterization and phenomenological modeling of long crack growth behavior with respect to microstructure and stress ratio. Therefore, the long crack propagation was characterized for eight different heat treatment conditions and four stress ratios. For comparison,physically short crack growth tests were also performed. The long crack growth threshold was found to be dominated by roughness-induced crack closure, and the fracture surface roughness is controlled by the primary -grain size. The reason for this correlation is a near-threshold crack propagation mode,which is dominated by the transcrystalline fracture of -grains. This correlation was used to model the crack growth threshold with respect to microstructure. A linear relation was determined between the stress ratio and the threshold value, which was also found in this approach. Further presented models cover the crack growth behavior in the near-threshold (Stage I) and mid-growth rate regions (Stage II). |
回复此楼» 猜你喜欢
93BebMhtakh前后11位开头都是大写
已经有5人回复
-
欢迎发来filecode的Mz6后的代码验证其规律
已经有86人回复
-
感觉是下周放榜了
已经有11人回复
-
filecode=后面第一个是大写字母
已经有10人回复
-
时间戳变了，能看出什么问题？
已经有4人回复
-
哪位老哥知道今年的国自然具体哪一天放榜？
已经有15人回复
-
今天系统多次维护，明天很可能放榜！
已经有9人回复
-
时间戳又变了8-15
已经有25人回复
-
2027广东省杰青
已经有6人回复
-
快农历七夕节了，轻松一下，男人悄悄话，女施主请不要进来。
已经有3人回复
2楼2012-03-09 11:11:23
wxb0626
木虫 (正式写手)
- 翻译EPI: 16
- 应助: 2 (幼儿园)
- 金币: 4224.8
- 红花: 1
- 帖子: 406
- 在线: 404.1小时
- 虫号: 812014
- 注册: 2009-07-19
- 性别: GG
- 专业: 环境化工
【答案】应助回帖
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
lidongze(金币+20, 翻译EPI+1): 2012-03-09 19:03:33
lidongze(金币+20, 翻译EPI+1): 2012-03-09 19:03:33
| Ti-6Al-4V 是一种在航天领域中常用的钛基合金。对这种合金成分耐损伤设计日益增长的需求使得了解其裂痕增长行为的详细知识成为必要。本研究的目的是对与微观结构和应力比相关的长裂痕的增长行为进行表征及建立唯象模型。因此，使用了八种不同的热处理条件和四个应力比对裂纹增长进行了表征。为了便于比较，还进行了物理短裂纹增长测试，发现长裂痕增长的阀值由粗糙度诱发的裂纹闭合主导，断裂表面的粗糙度受初生晶粒尺寸控制。存在这种相关性的原因是一种近门槛区的裂纹扩展模式，这种模式是由晶粒的穿晶断裂主导。这种相关性被用来对与微观结构有关的裂纹增长阀值建模。在这种近似中还发现应力比和阀值之间存在线形关系。进一步提出了涵盖近门槛区的裂纹增长行为（第1阶段）和中等增长速率区域（第2阶段）的裂纹增长行为的模型。 |
3楼2012-03-09 14:43:31
