24小时热门版块排行榜    

查看: 559  |  回复: 2

zyj8119

木虫 (著名写手)

[求助] sorption任务中途突然断电,怎么重新启动运算?

算了sorption算到一般,突然断电,然后重新启动,发现任务虽然显示的running,但是根本不占据CPU,想问一下,怎么能够重启SORPTION的运算呢?给了我一个什么restart.xsd和另外一个xsd文件。。。
回复此楼
好好学习,天天向上。
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

061302102

银虫 (小有名气)

【答案】应助回帖

zyj8119(金币+10): 谢谢回帖。。。 2011-07-01 12:14:06
引用回帖:
Originally posted by zyj8119 at 2011-06-29 14:13:07:
算了sorption算到一般,突然断电,然后重新启动,发现任务虽然显示的running,但是根本不占据CPU,想问一下,怎么能够重启SORPTION的运算呢?给了我一个什么restart.xsd和另外一个xsd文件。。。

我用的还不是很熟,一般这种情况的话 都是重新算。。。。。
2楼2011-06-30 21:33:12
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

niliu

铁杆木虫 (著名写手)

【答案】应助回帖

★ ★ ★ ★ ★
zyj8119(金币+10): 貌似看的不太明白。。。 2011-07-01 01:46:43
zh1987hs(金币+5): 谢谢 2011-07-01 19:42:22
引用回帖:
Originally posted by zyj8119 at 2011-06-29 14:13:07:
算了sorption算到一般,突然断电,然后重新启动,发现任务虽然显示的running,但是根本不占据CPU,想问一下,怎么能够重启SORPTION的运算呢?给了我一个什么restart.xsd和另外一个xsd文件。。。

If you stop a Sorption fixed pressure, fixed loading, Henry constant, or adsorption isotherm simulation using the Stop Job button on the job log window and you choose to download the results, you will be able to restart the job from the point at which the calculation was interrupted.

首先下载结果,然后按下面操作。

To restart a Sorption run

1.Open any document in the main results directory for the job you wish to continue.
2.Open the Sorption Calculation dialog. If the calculation was interrupted cleanly and all of the restart files are present, the Restart checkbox will be enabled. Check the Restart checkbox.
3.Select a remote gateway and configure other job parameters using the Job Control tab.
4.Click the Run button to start the job. The restarted job is submitted and executed in exactly the same way as a new Sorption run.
3楼2011-06-30 22:14:04
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 zyj8119 的主题更新
信息提示
请填处理意见