24小时热门版块排行榜    

查看: 1411  |  回复: 8
当前主题已经存档。

leotron23

金虫 (正式写手)

[交流] DIY染料敏化太阳能电池(图解)

1.We start with 2 glass plates. Each plate is coated with TCO (or Transparent Coated Oxide). This is a thin coating which is electrically conducting in much the same way as metal wire. The TCO consists of SnO2:F (:F indicates that the tin oxide is doped with a very small amount of Fluor). The coating is transparent to enable light to pass through without loss. Doping is the process where small quantities of foreign atoms are introduced to control the electronic properties of semi conductors.

The function of the TCO is to transport the current produced from the solar cell to the power consuming device.

The Minus electrode goes by the name of ‘Photo electrode”



2.A thin layer of TiO2 is coated on the photo electrode. This layer consists of a spongy 3 dimensional nano crystalline network. The layer itself has a thickness of 10 micrometer and is randomly stacked. Nano technology lies at the heart of this type of solar cell. The TiO2 particles are ‘grown’ from around 3 nm to approx. 20 nm which appears to be the most optimal size for this type of dye solar cell.


3.The dye molecules attach to the TiO2 particles.


4. The plus or counter electrode is provided with a thin graphite layer. The purpose of the graphite is to act as a catalyst.


5. The electrolyte is added. The electrolyte consists of Iodine (I2) and Sodium Iodide (NaI) dissolved in ethanol.  


[ Last edited by leotron23 on 2006-8-23 at 18:45 ]
回复此楼

» 收录本帖的淘帖专辑推荐

资料

» 猜你喜欢

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

leotron23

金虫 (正式写手)

6.The electrical circuit is completed. The solar cell kit contains both a calculator and melody module to actually show that power is being generated and used. A multimeter is included to measure resistance, voltage and current generated. The actual working of the dye solar cell is contained in a further series of slides.


7.Dye molecules chemically attach to the TiO2 particles when the negative electrode is submerged in the liquid dye.

The transformation of photon energy into electrical current occurs in sequence as shown in the following slides:



8.A small amount of light is absorbed by the dye molecules.


9.The photon energy present is transferred to single electrons in the dye molecules.


10.Upon transfer of photon energy, the single electrons become mobile and able to leave their defined bonds.
2楼2006-08-23 18:50:35
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

leotron23

金虫 (正式写手)

11.The electrons have sufficient energy to migrate thru the TiO2 and TCO layers to the power consuming device.


12. The device now is able to function as designed.


13.A closed circuit is required for electrical current to run, that is once the electrons have shed their energy they must return to the point of release. This is the task of the counter electrode which absorbs the electrons from the power consuming device. These electrons return - by means of the electrolyte - to the dye molecules from which they were released.  


14.To realize this a counter electrode is required to absorb the electrons from the energy consuming device. The electrons are transferred to ions present in the liquid electrolyte. To enable this transfer to occur smoothly a catalyst is required. This is the function of the graphite deposited on the TCO of the counter electrode.


15.The ‘charged’ ions carry the electrons thru the liquid and pores of the Tio2 ‘sponge’ until they get to the dye molecules short of electrons. The electrons now transfer from the ions to the dye molecules. This step closes the electrical circuit so the process is able to repeat itself.
3楼2006-08-23 18:53:30
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

photonic

铁杆木虫 (著名写手)

1

do it
4楼2006-08-24 00:37:24
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

longriver1

禁虫 (小有名气)

本帖内容被屏蔽

5楼2006-10-18 13:40:13
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jerryls

铁杆木虫 (小有名气)

1

very good
6楼2006-10-19 05:15:50
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

westwolf

木虫 (著名写手)


1

good job, thx!
7楼2006-10-19 07:09:20
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

解连环

木虫 (正式写手)

8楼2006-10-19 11:04:15
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

gzk

铜虫 (初入文坛)

1

xiexie
9楼2006-10-19 23:13:44
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 leotron23 的主题更新
普通表情 高级回复 (可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[考研] 267求调剂 +3 钓鱼佬as 2026-03-02 3/150 2026-03-02 22:11 by Elden123
[考研] 321求调剂一志愿东北林业大学材料与化工英二数二 +5 虫虫虫虫虫7 2026-03-01 9/450 2026-03-02 21:33 by sunny81
[考研] 化工335求调剂 +3 摸摸猫猫头 2026-03-02 3/150 2026-03-02 20:55 by 平凡的七月
[考研] 化学,材料,环境类求调剂 +7 考研版棒棒 2026-03-02 7/350 2026-03-02 19:56 by hypershenger
[考研] 302材料工程求调剂 +5 Doleres 2026-03-01 6/300 2026-03-02 19:53 by 张晓芳0105
[考研] 271求调剂 +3 Ricardo1113 2026-03-02 3/150 2026-03-02 19:53 by zhukairuo
[考研] 材料工程274求调剂 +5 Lilithan 2026-03-01 5/250 2026-03-02 19:39 by caszguilin
[考研] 课题组接收材料类调剂研究生 +4 gaoxiaoniuma 2026-02-28 5/250 2026-03-02 19:33 by Xinyuu
[考博] 博士自荐 +4 kkluvs 2026-02-28 5/250 2026-03-02 19:19 by 轻松不少随
[考研] 282求调剂 +4 2103240126 2026-03-02 6/300 2026-03-02 18:07 by 2103240126
[考研] 欢迎采矿、地质、岩土、计算机、人工智能等专业的同学报考 +6 pin8023 2026-02-28 8/400 2026-03-02 17:13 by 0854蹲调剂
[考研] 化工专硕348,一志愿985求调剂 +6 弗格个 2026-02-28 9/450 2026-03-02 14:09 by liyongv
[基金申请] 面上模板改不了页边距吧? +6 ieewxg 2026-02-25 7/350 2026-03-02 12:44 by stidwellNK
[考研] 材料学硕318求调剂 +14 February_Feb 2026-03-01 16/800 2026-03-02 11:17 by yuchj
[基金申请] 此成果不能导入原因:元数据必填信息不完整,可 进行补充。 +4 Kittylucky 2026-03-02 5/250 2026-03-02 11:07 by jurkat.1640
[考研] 0854复试调剂 276 +4 wmm9 2026-03-01 6/300 2026-03-02 09:28 by 热情沙漠
[考研] 材料工程269求调剂 +3 白刺玫 2026-03-02 3/150 2026-03-02 09:25 by 一休哥FU
[考研] 0857调剂 +4 一ll半 2026-02-28 5/250 2026-03-02 02:33 by 908055542
[考研] 调剂 +3 简木ChuFront 2026-02-28 3/150 2026-03-01 11:46 by 王伟要上岸啊
[高分子] 求环氧树脂研发1名 +3 孙xc 2026-02-25 11/550 2026-02-28 16:57 by ichall
信息提示
请填处理意见