应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台 » 计算模拟区 » 仿真模拟 » MATLAB » 【求助】MATLAB错误
71/1返回列表
查看: 1839  |  回复: 6
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看

zyj8119

木虫 (著名写手)

[交流] 【求助】MATLAB错误

CODE:
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
y3=[0.012,0.017,0.021,0.032,0.035,0.039,0.040,0.041,0.047,0.053];
y4=[0.011,0.015,0.023,0.027,0.035,0.039,0.042,0.049,0.051,0.055];
plot(x,y1,'gx')
hold on
plot(x,y2,'b*')
hold on
plot(x,y3,'r+')
hold on
plot(x,y4,'mo')
xlabel('total pressure(kpa)');ylabel('adsorption capacity(mmol/g)');
yy1=fit(x',y1','smoothingspline');
yy2=fit(x',y2','smoothingspline');
yy3=fit(x',y3','smoothingspline');
yy4=fit(x',y4','smoothingspline');
plot(x,yy1,'g-');
hold on
plot(x,yy2,'b-')
hold on
plot(x,yy3,'r-')
hold on
plot(x,yy4,'m-')
legend('MCM-41 without APTS','MCM-41 with 15APTS','MCM-41 with 30APTS',...
    'MCM-41 with 45APTS');
hold off
end

为什么此程序运行会出现这个错误：
??? Error using ==> diff
Function 'diff' is not supported for class 'cfit'.

Error in ==> cfit.plot at 65
   if any(diff(xdata)<0)

Error in ==> CO2 at 20
plot(x,yy1,'g-');
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐，对您同样有帮助:
1楼 2010-12-15 15:49:32
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

xiegangmai

版主 (职业作家)
★ ★ ★
zyj8119(金币+1):谢谢参与
zyj8119(金币+19):谢谢提醒！ 2010-12-15 18:25:29
robert2020(金币+2):多谢应助！ 2010-12-16 09:19:36
[quote]Originally posted by zyj8119 at 2010-12-15 15:49:32:
CODE:
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
... [/quote]

[code]
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
y3=[0.012,0.017,0.021,0.032,0.035,0.039,0.040,0.041,0.047,0.053];
y4=[0.011,0.015,0.023,0.027,0.035,0.039,0.042,0.049,0.051,0.055];
plot(x,y1,'gx')
hold on
plot(x,y2,'b*')
% hold on
plot(x,y3,'r+')
% hold on
plot(x,y4,'mo')
xlabel('total pressure(kpa)');ylabel('adsorption capacity(mmol/g)');
yy1=fit(x',y1','smoothingspline');
yy2=fit(x',y2','smoothingspline');
yy3=fit(x',y3','smoothingspline');
yy4=fit(x',y4','smoothingspline');
% plot(x,yy1,'g-');
% hold on
% plot(x,yy2,'b-')
% hold on
% plot(x,yy3,'r-')
% hold on
% plot(x,yy4,'m-')
plot(yy1,'g-');
plot(yy2,'b-');
plot(yy3,'r-');
plot(yy4,'m-');
legend('MCM-41 without APTS','MCM-41 with 15APTS','MCM-41 with 30APTS',...
    'MCM-41 with 45APTS');
hold off
end
赞一下(2人) 回复此楼
2楼2010-12-15 17:22:16
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zmc

金虫 (正式写手)
★ ★ ★ ★
小木虫(金币+0.5):给个红包，谢谢回帖交流
robert2020(金币+3):多谢应助！ 2010-12-29 09:05:21
fit 函数的返回结果并不是实数，而是cfit object cfun，故作图的时候会出错，应改为：
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
y3=[0.012,0.017,0.021,0.032,0.035,0.039,0.040,0.041,0.047,0.053];
y4=[0.011,0.015,0.023,0.027,0.035,0.039,0.042,0.049,0.051,0.055];
plot(x,y1,'gx')
hold on
plot(x,y2,'b*')
hold on
plot(x,y3,'r+')
hold on
plot(x,y4,'mo')
xlabel('total pressure(kpa)');ylabel('adsorption capacity(mmol/g)');
yy1=fit(x',y1','smoothingspline');
yy2=fit(x',y2','smoothingspline');
yy3=fit(x',y3','smoothingspline');
yy4=fit(x',y4','smoothingspline');
plot(yy1,'g-');
hold on
plot(yy2,'b-')
hold on
plot(yy3,'r-')
hold on
plot(yy4,'m-')
legend('MCM-41 without APTS','MCM-41 with 15APTS','MCM-41 with 30APTS',...
    'MCM-41 with 45APTS');
hold off
end
赞一下(2人) 回复此楼
3楼2010-12-19 21:31:56
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zyj8119

木虫 (著名写手)
引用回帖:
Originally posted by zmc at 2010-12-19 21:31:56:
fit 函数的返回结果并不是实数，而是cfit object cfun，故作图的时候会出错，应改为：
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039, ...

谢谢，我想问一下，假如是使用别的拟合方式，是不是只要把smoothspline换成需要的就好？
赞一下 回复此楼
4楼2010-12-19 21:34:06
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zmc

金虫 (正式写手)
★ ★ ★ ★
小木虫(金币+0.5):给个红包，谢谢回帖交流
robert2020(金币+3):非常感谢虫友应助！辛苦了！ 2010-12-21 13:08:56
引用回帖:
Originally posted by zyj8119 at 2010-12-19 21:34:06:

谢谢，我想问一下，假如是使用别的拟合方式，是不是只要把smoothspline换成需要的就好？

恩 对的，具体的方法可以由cflibhelp得到~  祝你好运
For curves:                                                               
    GROUP           DESCRIPTION                                             
    distribution - distribution models such as Weibull                     
    exponential  - exponential function and sum of two exponential functions
    fourier      - up to eight terms of fourier series                     
    gaussian     - sum of up to eight gaussian models                       
    power        - power function and sum of two power functions            
    rational     - rational equation models, up to 5th degree / 5th degree  
    sin          - sum of up to eight sin functions                        
    spline       - splines                                                  
    interpolant  - interpolating models                                    
    polynomial   - polynomial models up to degree nine                     
                                                                           
For surfaces:                                                              
    GROUP           DESCRIPTION                                             
    interpolant  - interpolating models                                    
    polynomial   - polynomial models up to degree five                     
    lowess       - lowess smoothing models                                 
                                                                           
To list only the model equations for a group, type CFLIBHELP               
followed by the group name.                                                
Example:                                                                  
   cflibhelp polynomial                                                     
                                                                           
All models in the Curve Fitting Library:                                   
                                                                           
  DISTRIBUTION MODELS

        MODELNAME             EQUATION

         weibull               Y = a*b*x^(b-1)*exp(-a*x^b)


  EXPONENTIAL MODELS

        MODELNAME             EQUATION

          exp1                 Y = a*exp(b*x)
          exp2                 Y = a*exp(b*x)+c*exp(d*x)


  FOURIER SERIES

        MODELNAME             EQUATION

        fourier1               Y = a0+a1*cos(x*p)+b1*sin(x*p)
        fourier2               Y = a0+a1*cos(x*p)+b1*sin(x*p)+a2*cos(2*x*p)+b2*sin(2*x*p)
        fourier3               Y = a0+a1*cos(x*p)+b1*sin(x*p)+...+a3*cos(3*x*p)+b3*sin(3*x*p)
         ...
        fourier8               Y = a0+a1*cos(x*p)+b1*sin(x*p)+...+a8*cos(8*x*p)+b8*sin(8*x*p)

      where p = 2*pi/(max(xdata)-min(xdata)).


  GAUSSIAN SUMS (Peak fitting)

        MODELNAME             EQUATION

         gauss1                Y = a1*exp(-((x-b1)/c1)^2)
         gauss2                Y = a1*exp(-((x-b1)/c1)^2)+a2*exp(-((x-b2)/c2)^2)
         gauss3                Y = a1*exp(-((x-b1)/c1)^2)+...+a3*exp(-((x-b3)/c3)^2)
         ...
         gauss8                Y = a1*exp(-((x-b1)/c1)^2)+...+a8*exp(-((x-b8)/c8)^2)


  INTERPOLANT

        INTERPTYPE            DESCRIPTION

    Curves & Surfaces:
        linearinterp           linear interpolation
        nearestinterp          nearest neighbor interpolation
        cubicinterp            cubic spline interpolation

    Curves Only:
        pchipinterp            shape-preserving (pchip) interpolation

    Surfaces Only:
        biharmonicinterp       biharmonic (MATLAB 4 griddata) interpolation


  POLYNOMIAL MODELS

        MODELNAME             EQUATION

    Curves:
          poly1                Y = p1*x+p2
          poly2                Y = p1*x^2+p2*x+p3
          poly3                Y = p1*x^3+p2*x^2+...+p4
          ...
          poly9                Y = p1*x^9+p2*x^8+...+p10

    Surfaces:

     Model names for polynomial surfaces are 'polyij', where i is the degree in x
     and j is the degree in y. The maximum for both i and j is five. The degree of
     the polynomial is the maximum of i and j. The degree of x in each term will be
     less than or equal to i, and the degree of y in each term will be less than or
     equal to j. For example:

          poly21               Z = p00 + p10*x + p01*y + p20*x^2 + p11*x*y
          poly13               Z = p00 + p10*x + p01*y + p11*x*y + p02*y^2 + p12*x*y^2 + p03*y^3
          poly55               Z = p00 + p10*x + p01*y +...+ p14*x*y^4 + p05*y^5


  POWER MODELS

        MODELNAME             EQUATION

         power1                Y = a*x^b
         power2                Y = a*x^b+c


  RATIONAL MODELS

     Rational Models are polynomials over polynomials with the leading coefficient
     of the denominator set to 1. Model names are 'ratij', where i is the degree of the
     numerator and j is the degree of the denominator. The degrees go up to five for
     both the numerator and the denominator. For example:

        MODELNAME             EQUATION

          rat02                Y = (p1)/(x^2+q1*x+q2)
          rat21                Y = (p1*x^2+p2*x+p3)/(x+q1)
          rat55                Y = (p1*x^5+...+p6)/(x^5+...+q5)


  SUM OF SINE FUNCTIONS

        MODELNAME             EQUATION

          sin1                 Y = a1*sin(b1*x+c1)
          sin2                 Y = a1*sin(b1*x+c1)+a2*sin(b2*x+c2)
          sin3                 Y = a1*sin(b1*x+c1)+...+a3*sin(b3*x+c3)
          ...
          sin8                 Y = a1*sin(b1*x+c1)+...+a8*sin(b8*x+c8)


  SPLINES

     Spline models are only supported for curve fitting, not for surface fitting

        SPLINETYPE             DESCRIPTION

        cubicspline             cubic interpolating spline
        smoothingspline         smoothing spline


  LOWESS

     Lowess models are only supported for surface fitting, not for curve fitting

        MODELNAME          DESCRIPTION

        lowess               local linear regression
        loess                local quadratic regression
赞一下(2人) 回复此楼
5楼2010-12-20 20:56:45
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zyj8119

木虫 (著名写手)
引用回帖:
Originally posted by zmc at 2010-12-20 20:56:45:


恩 对的，具体的方法可以由cflibhelp得到~  祝你好运
For curves:                                                               
    GROUP           DESCRIPTION                                   ...

谢谢支持！！！！
回复此楼
6楼2010-12-20 20:59:18
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

longshan0928

新虫 (初入文坛)
good....;/
回复此楼
7楼2010-12-28 11:42:43
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 zyj8119 的主题更新
71/1返回列表
普通表情 龙 兔 虎 猫 高级回复 (可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[职场人生] 40+中年人失业后，还能找到好工作吗？ +9 xqy2009 2026-10-13 11/550 2026-10-15 16:37 by beefly
[有机交流] 用NBS溴化时溶剂除了CCl4外还有什么 +3 18834002860 2026-10-12 6/300 2026-10-15 14:30 by 长沙摩尔信息科�
[基金申请] 申请科研项目纯靠实力能成功吗？ 200+7 David1982 2026-10-13 11/550 2026-10-15 10:30 by zyqchem
[硕博家园] 极限拉扯，如何抉择 +11 Isak0320 2026-10-12 15/750 2026-10-14 21:55 by 猫鱼不是鱼
[论文投稿] 二审4个多月了还是Awaiting Reviewer Scores 10+3 纳斯达克ML 2026-10-11 4/200 2026-10-14 17:30 by babero
[有机交流] OpenAI又攻克数学难题了，离AI做有机合成还有多远？ +8 wangyl_123 2026-10-10 13/650 2026-10-14 15:12 by zuesli
[教师之家] 课题组会帮你通过考核么？ +4 好运来～9527 2026-10-10 7/350 2026-10-13 08:41 by xli1984
[公派出国] 售一区SCI文章T0P，我:8O.551.O54,科目全,可十急 +5 qR2AdCWTVtkw 2026-10-09 9/450 2026-10-11 22:34 by XQNyDCa1Tk5n
[找工作] 售SCI一区T0P文章，我:8.O55.1.O.54,科目全,可十急 +5 qR2AdCWTVtkw 2026-10-09 8/400 2026-10-11 22:26 by XQNyDCa1Tk5n
[公派出国] 售SCI一区文章，我:8O5.5.1.O5.4,科目全,可伽急 +5 qR2AdCWTVtkw 2026-10-09 10/500 2026-10-11 22:26 by XQNyDCa1Tk5n
[考博] 售SCI一区文章，我:8.O.55.1.O.54,科目齐全,可伽急 +3 qR2AdCWTVtkw 2026-10-09 7/350 2026-10-11 22:11 by XQNyDCa1Tk5n
[教师之家] 售SCI文章，我:8O5.5.1.O.54,科目齐全,可+急 (EPI+-1)(金币-50) +5 qR2AdCWTVtkw 2026-10-09 10/500 2026-10-11 22:06 by XQNyDCa1Tk5n
[教师之家] 售SCI一区T0P文章，我:8.O.55.1.O.5.4,科目全,可+急 (EPI+-1)(金币-50) +5 qR2AdCWTVtkw 2026-10-09 10/500 2026-10-11 14:25 by VOMexwnDzOFZ
[教师之家] 售SCI文章，我:8O.5.5.1O.54,科目全,可十急 (EPI+-1)(金币-50) +4 qR2AdCWTVtkw 2026-10-09 7/350 2026-10-11 14:05 by VOMexwnDzOFZ
[考研] 售SCI文章，我:8O.5.5.1O.54,科目全,可十急 +5 qR2AdCWTVtkw 2026-10-09 8/400 2026-10-11 13:51 by VOMexwnDzOFZ
[硕博家园] 售SCI-T0P文章，我:8O.5.5.1.O.54,科目齐全,可+急 +5 qR2AdCWTVtkw 2026-10-09 8/400 2026-10-11 13:45 by VOMexwnDzOFZ
[找工作] 售SCI一区T0P文章，我:8O.55.1.O.5.4,科目齐全,可+急 +3 qR2AdCWTVtkw 2026-10-09 7/350 2026-10-11 10:54 by VOMexwnDzOFZ
[找工作] 售SCI一区T0P文章，我:8O.55.1.O.5.4,科目齐全,可+急 +4 qR2AdCWTVtkw 2026-10-09 7/350 2026-10-11 10:34 by VOMexwnDzOFZ
[考博] 招收博士生一名 +3 mandolin 2026-10-10 3/150 2026-10-11 10:21 by 不是山谷！
[有机交流] 各位大佬，路线设计求助 +6 zapen 2026-10-08 8/400 2026-10-10 15:59 by zapen
信息提示
关闭
请填处理意见
关闭