应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台 » 计算模拟区 » 仿真模拟 » MATLAB » 【求助】MATLAB错误
71/1返回列表
查看: 1803  |  回复: 6
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看

zyj8119

木虫 (著名写手)

[交流] 【求助】MATLAB错误

CODE:
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
y3=[0.012,0.017,0.021,0.032,0.035,0.039,0.040,0.041,0.047,0.053];
y4=[0.011,0.015,0.023,0.027,0.035,0.039,0.042,0.049,0.051,0.055];
plot(x,y1,'gx')
hold on
plot(x,y2,'b*')
hold on
plot(x,y3,'r+')
hold on
plot(x,y4,'mo')
xlabel('total pressure(kpa)');ylabel('adsorption capacity(mmol/g)');
yy1=fit(x',y1','smoothingspline');
yy2=fit(x',y2','smoothingspline');
yy3=fit(x',y3','smoothingspline');
yy4=fit(x',y4','smoothingspline');
plot(x,yy1,'g-');
hold on
plot(x,yy2,'b-')
hold on
plot(x,yy3,'r-')
hold on
plot(x,yy4,'m-')
legend('MCM-41 without APTS','MCM-41 with 15APTS','MCM-41 with 30APTS',...
    'MCM-41 with 45APTS');
hold off
end

为什么此程序运行会出现这个错误：
??? Error using ==> diff
Function 'diff' is not supported for class 'cfit'.

Error in ==> cfit.plot at 65
   if any(diff(xdata)<0)

Error in ==> CO2 at 20
plot(x,yy1,'g-');
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐，对您同样有帮助:

» 抢金币啦！回帖就可以得到:

查看全部散金贴
1楼 2010-12-15 15:49:32
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

xiegangmai

版主 (职业作家)
★ ★ ★
zyj8119(金币+1):谢谢参与
zyj8119(金币+19):谢谢提醒！ 2010-12-15 18:25:29
robert2020(金币+2):多谢应助！ 2010-12-16 09:19:36
[quote]Originally posted by zyj8119 at 2010-12-15 15:49:32:
CODE:
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
... [/quote]

[code]
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
y3=[0.012,0.017,0.021,0.032,0.035,0.039,0.040,0.041,0.047,0.053];
y4=[0.011,0.015,0.023,0.027,0.035,0.039,0.042,0.049,0.051,0.055];
plot(x,y1,'gx')
hold on
plot(x,y2,'b*')
% hold on
plot(x,y3,'r+')
% hold on
plot(x,y4,'mo')
xlabel('total pressure(kpa)');ylabel('adsorption capacity(mmol/g)');
yy1=fit(x',y1','smoothingspline');
yy2=fit(x',y2','smoothingspline');
yy3=fit(x',y3','smoothingspline');
yy4=fit(x',y4','smoothingspline');
% plot(x,yy1,'g-');
% hold on
% plot(x,yy2,'b-')
% hold on
% plot(x,yy3,'r-')
% hold on
% plot(x,yy4,'m-')
plot(yy1,'g-');
plot(yy2,'b-');
plot(yy3,'r-');
plot(yy4,'m-');
legend('MCM-41 without APTS','MCM-41 with 15APTS','MCM-41 with 30APTS',...
    'MCM-41 with 45APTS');
hold off
end
赞一下(2人) 回复此楼
2楼2010-12-15 17:22:16
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zmc

金虫 (正式写手)
★ ★ ★ ★
小木虫(金币+0.5):给个红包，谢谢回帖交流
robert2020(金币+3):多谢应助！ 2010-12-29 09:05:21
fit 函数的返回结果并不是实数，而是cfit object cfun，故作图的时候会出错，应改为：
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039,0.045];
y2=[0.011,0.012,0.021,0.024,0.027,0.040,0.042,0.042,0.042,0.049];
y3=[0.012,0.017,0.021,0.032,0.035,0.039,0.040,0.041,0.047,0.053];
y4=[0.011,0.015,0.023,0.027,0.035,0.039,0.042,0.049,0.051,0.055];
plot(x,y1,'gx')
hold on
plot(x,y2,'b*')
hold on
plot(x,y3,'r+')
hold on
plot(x,y4,'mo')
xlabel('total pressure(kpa)');ylabel('adsorption capacity(mmol/g)');
yy1=fit(x',y1','smoothingspline');
yy2=fit(x',y2','smoothingspline');
yy3=fit(x',y3','smoothingspline');
yy4=fit(x',y4','smoothingspline');
plot(yy1,'g-');
hold on
plot(yy2,'b-')
hold on
plot(yy3,'r-')
hold on
plot(yy4,'m-')
legend('MCM-41 without APTS','MCM-41 with 15APTS','MCM-41 with 30APTS',...
    'MCM-41 with 45APTS');
hold off
end
赞一下(2人) 回复此楼
3楼2010-12-19 21:31:56
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zyj8119

木虫 (著名写手)
引用回帖:
Originally posted by zmc at 2010-12-19 21:31:56:
fit 函数的返回结果并不是实数，而是cfit object cfun，故作图的时候会出错，应改为：
function CO2
clc;
x=[10,20,30,40,50,60,70,80,90,100];
y1=[0.011,0.013,0.015,0.022,0.026,0.031,0.031,0.033,0.039, ...

谢谢，我想问一下，假如是使用别的拟合方式，是不是只要把smoothspline换成需要的就好？
赞一下 回复此楼
4楼2010-12-19 21:34:06
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zmc

金虫 (正式写手)
★ ★ ★ ★
小木虫(金币+0.5):给个红包，谢谢回帖交流
robert2020(金币+3):非常感谢虫友应助！辛苦了！ 2010-12-21 13:08:56
引用回帖:
Originally posted by zyj8119 at 2010-12-19 21:34:06:

谢谢，我想问一下，假如是使用别的拟合方式，是不是只要把smoothspline换成需要的就好？

恩 对的，具体的方法可以由cflibhelp得到~  祝你好运
For curves:                                                               
    GROUP           DESCRIPTION                                             
    distribution - distribution models such as Weibull                     
    exponential  - exponential function and sum of two exponential functions
    fourier      - up to eight terms of fourier series                     
    gaussian     - sum of up to eight gaussian models                       
    power        - power function and sum of two power functions            
    rational     - rational equation models, up to 5th degree / 5th degree  
    sin          - sum of up to eight sin functions                        
    spline       - splines                                                  
    interpolant  - interpolating models                                    
    polynomial   - polynomial models up to degree nine                     
                                                                           
For surfaces:                                                              
    GROUP           DESCRIPTION                                             
    interpolant  - interpolating models                                    
    polynomial   - polynomial models up to degree five                     
    lowess       - lowess smoothing models                                 
                                                                           
To list only the model equations for a group, type CFLIBHELP               
followed by the group name.                                                
Example:                                                                  
   cflibhelp polynomial                                                     
                                                                           
All models in the Curve Fitting Library:                                   
                                                                           
  DISTRIBUTION MODELS

        MODELNAME             EQUATION

         weibull               Y = a*b*x^(b-1)*exp(-a*x^b)


  EXPONENTIAL MODELS

        MODELNAME             EQUATION

          exp1                 Y = a*exp(b*x)
          exp2                 Y = a*exp(b*x)+c*exp(d*x)


  FOURIER SERIES

        MODELNAME             EQUATION

        fourier1               Y = a0+a1*cos(x*p)+b1*sin(x*p)
        fourier2               Y = a0+a1*cos(x*p)+b1*sin(x*p)+a2*cos(2*x*p)+b2*sin(2*x*p)
        fourier3               Y = a0+a1*cos(x*p)+b1*sin(x*p)+...+a3*cos(3*x*p)+b3*sin(3*x*p)
         ...
        fourier8               Y = a0+a1*cos(x*p)+b1*sin(x*p)+...+a8*cos(8*x*p)+b8*sin(8*x*p)

      where p = 2*pi/(max(xdata)-min(xdata)).


  GAUSSIAN SUMS (Peak fitting)

        MODELNAME             EQUATION

         gauss1                Y = a1*exp(-((x-b1)/c1)^2)
         gauss2                Y = a1*exp(-((x-b1)/c1)^2)+a2*exp(-((x-b2)/c2)^2)
         gauss3                Y = a1*exp(-((x-b1)/c1)^2)+...+a3*exp(-((x-b3)/c3)^2)
         ...
         gauss8                Y = a1*exp(-((x-b1)/c1)^2)+...+a8*exp(-((x-b8)/c8)^2)


  INTERPOLANT

        INTERPTYPE            DESCRIPTION

    Curves & Surfaces:
        linearinterp           linear interpolation
        nearestinterp          nearest neighbor interpolation
        cubicinterp            cubic spline interpolation

    Curves Only:
        pchipinterp            shape-preserving (pchip) interpolation

    Surfaces Only:
        biharmonicinterp       biharmonic (MATLAB 4 griddata) interpolation


  POLYNOMIAL MODELS

        MODELNAME             EQUATION

    Curves:
          poly1                Y = p1*x+p2
          poly2                Y = p1*x^2+p2*x+p3
          poly3                Y = p1*x^3+p2*x^2+...+p4
          ...
          poly9                Y = p1*x^9+p2*x^8+...+p10

    Surfaces:

     Model names for polynomial surfaces are 'polyij', where i is the degree in x
     and j is the degree in y. The maximum for both i and j is five. The degree of
     the polynomial is the maximum of i and j. The degree of x in each term will be
     less than or equal to i, and the degree of y in each term will be less than or
     equal to j. For example:

          poly21               Z = p00 + p10*x + p01*y + p20*x^2 + p11*x*y
          poly13               Z = p00 + p10*x + p01*y + p11*x*y + p02*y^2 + p12*x*y^2 + p03*y^3
          poly55               Z = p00 + p10*x + p01*y +...+ p14*x*y^4 + p05*y^5


  POWER MODELS

        MODELNAME             EQUATION

         power1                Y = a*x^b
         power2                Y = a*x^b+c


  RATIONAL MODELS

     Rational Models are polynomials over polynomials with the leading coefficient
     of the denominator set to 1. Model names are 'ratij', where i is the degree of the
     numerator and j is the degree of the denominator. The degrees go up to five for
     both the numerator and the denominator. For example:

        MODELNAME             EQUATION

          rat02                Y = (p1)/(x^2+q1*x+q2)
          rat21                Y = (p1*x^2+p2*x+p3)/(x+q1)
          rat55                Y = (p1*x^5+...+p6)/(x^5+...+q5)


  SUM OF SINE FUNCTIONS

        MODELNAME             EQUATION

          sin1                 Y = a1*sin(b1*x+c1)
          sin2                 Y = a1*sin(b1*x+c1)+a2*sin(b2*x+c2)
          sin3                 Y = a1*sin(b1*x+c1)+...+a3*sin(b3*x+c3)
          ...
          sin8                 Y = a1*sin(b1*x+c1)+...+a8*sin(b8*x+c8)


  SPLINES

     Spline models are only supported for curve fitting, not for surface fitting

        SPLINETYPE             DESCRIPTION

        cubicspline             cubic interpolating spline
        smoothingspline         smoothing spline


  LOWESS

     Lowess models are only supported for surface fitting, not for curve fitting

        MODELNAME          DESCRIPTION

        lowess               local linear regression
        loess                local quadratic regression
赞一下(2人) 回复此楼
5楼2010-12-20 20:56:45
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zyj8119

木虫 (著名写手)
引用回帖:
Originally posted by zmc at 2010-12-20 20:56:45:


恩 对的，具体的方法可以由cflibhelp得到~  祝你好运
For curves:                                                               
    GROUP           DESCRIPTION                                   ...

谢谢支持！！！！
回复此楼
6楼2010-12-20 20:59:18
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

longshan0928

新虫 (初入文坛)
good....;/
回复此楼
7楼2010-12-28 11:42:43
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 zyj8119 的主题更新
71/1返回列表
普通表情 龙 兔 虎 猫 高级回复 (可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[基金申请] 为什么资助数各大高校都创新高，自己申请怎么就这么难 +14 Kittylucky 2026-08-27 15/750 2026-09-02 19:35 by liumei0601
[基金申请] 科研人应该花精力去思考如何解决问题，而不是去凝练问题 +7 瞬息宇宙 2026-09-01 14/700 2026-09-02 17:33 by ma0526
[基金申请] 基金系统什么内容也没有 30+4 winsaint 2026-08-27 10/500 2026-09-02 11:35 by 大不刘6
[基金申请] 学科评审组评审是指会评吗？ +5 瞬息宇宙 2026-08-31 5/250 2026-09-02 10:13 by 雨冰共舞
[文学芳草园] 梦想 +5 myrtle 2026-08-26 8/400 2026-09-02 02:42 by Leogzhya
[基金申请] 面上函评意见出来了，像什么等级？ 20+4 Tsingking1 2026-08-27 17/850 2026-09-01 19:51 by 超级无敌华子
[基金申请] 麻烦专家们看看评委们的意见（F口面上） +7 gdd2018 2026-08-28 12/600 2026-09-01 08:32 by 尼古拉斯小虫
[基金申请] 国社科又开始会评了，不知道这次命运如何 +7 雨打竹帘 2026-08-30 11/550 2026-08-31 23:16 by hittle2008
[基金申请] 基金未中，这种答复是模板吗？ +6 zhaosm1982 2026-08-27 7/350 2026-08-31 21:18 by qdxxmc
[基金申请] 面上意见出来了 +12 黄鸟于飞Chao 2026-08-29 23/1150 2026-08-31 18:57 by 黄鸟于飞Chao
[基金申请] 能否申诉？ +7 echo8914667 2026-08-30 8/400 2026-08-31 17:00 by yihongxu
[基金申请] 中青基了要发朋友圈吗？ +7 349506619 2026-08-28 7/350 2026-08-31 13:39 by 冼亮淀粉酶
[基金申请] 29号明天会评吗 +4 笨笨唐 2026-08-28 4/200 2026-08-31 09:30 by huixian257
[基金申请] 为什么到现在没收到通知？ +5 tannykie 2026-08-29 5/250 2026-08-30 21:05 by purplejack
[基金申请] 有没有仍没收到信息的 +7 德尚中行 2026-08-27 8/400 2026-08-30 20:52 by purplejack
[考博] 找导师 +6 yuanjiabao 2026-08-29 7/350 2026-08-30 14:40 by 生科新手
[基金申请] 我就是申请一个面上项目而已，这评审意见是按照杰青的条件评的吧？ +6 gouxfjh 2026-08-28 11/550 2026-08-30 07:57 by gouxfjh
[基金申请] 国自然评审意见 +13 wangmingqi 2026-08-28 19/950 2026-08-29 10:22 by Poppy1104
[基金申请] 2026年叶企孙基金 +4 bud_bud 2026-08-27 7/350 2026-08-29 07:23 by foolishmani
[基金申请] 看板上这么多中的，有点像50人群里49个人都是骗子的那种感觉…… +5 a089 2026-08-26 6/300 2026-08-27 14:05 by jonewore
信息提示
关闭
请填处理意见
关闭