24小时热门版块排行榜    

查看: 703  |  回复: 5
本帖产生 1 个 翻译EPI ,点击这里进行查看
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

dongzh311

金虫 (小有名气)


[交流] 请帮忙翻译一段话

提取图2(a) 中点云①,②,③,经坐标转换后,根据式(9)计算它们到图2(b)中对应平面的距离,得配准精度见表2。由于测站1中③只能提取一些边线,误差较①,②两种情况略大。可以看出,配准精度跟选取的点云区域有关,对应区域越接近,精度越高。

实在是头晕,请帮忙

» 猜你喜欢

» 抢金币啦!回帖就可以得到:

查看全部散金贴

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
dongzh311(金币+10, 翻译EPI+1): 2010-12-14 21:42:38
Extract point clouds ①, ②, ③ from  Figure 2 (a) .After coordinate transformation,the  corresponding distance from  these point clouds  to the  plane in  Figure 2 (b) were calculated  according to equation (9). 我觉得举得计算这样说更精确。
4楼2010-12-14 20:39:42
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 6 个回答

cfm877

铁杆木虫 (知名作家)


dongzh311(金币+15):非常感谢 2010-12-14 21:43:18
points cloud ①, ②, ③ were extracted from  Figure 2 (a) ,and after coordinate transformation,the corresponding distance from the plane in  Figure 2 (b) were calculated  according to equation (9), and registration accuracy was got  in Table 2. 1.The error of  ③ was  slightly larger than that of ① and  ② for ③ in station 1 only  can to extract some edge. It can be seen that the registration accuracy was related to  the selected  area 0f point cloud, the closer the corresponding region, the higher the precision.
==================================================
中文读着就很别扭,很难翻译,再者专业词汇不了解,可能有很多错误,还请谅解
3楼2010-12-14 12:36:17
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

dongzh311

金虫 (小有名气)


谢谢两位,感觉有点眉目了
5楼2010-12-14 21:45:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
呵呵 楼下和lz是差不多专业的 我们外行还是有不少东西译不准的
6楼2010-12-15 00:56:03
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见