24小时热门版块排行榜    

查看: 1378  |  回复: 21
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

nanolab289

银虫 (小有名气)

[交流] 【求助】30金币求助翻译贴内内容 已有17人参与

The scanning electron microscope (SEM) is a type of electron microscope that images the sample surface by scanning it with a high-energy beam of electrons in a raster scan pattern. The electrons interact with the atoms that make up the sample producing signals that contain information about the sample's surface topography, composition and other properties such as electrical conductivity.
The types of signals produced by an SEM include secondary electrons, back scattered electrons (BSE), characteristic x-rays, light (cathodoluminescence), specimen current and transmitted electrons. These types of signal all require specialized detectors for their detection that are not usually all present on a single machine. The signals result from interactions of the electron beam with atoms at or near the surface of the sample. In the most common or standard detection mode, secondary electron imaging or SEI, the SEM can produce very high-resolution images of a sample surface, revealing details about 1 to 5 nm in size. Due to the way these images are created, SEM micrographs have a very large depth of field yielding a characteristic three-dimensional appearance useful for understanding the surface structure of a sample. A wide range of magnifications is possible, ranging from about x 25 (about equivalent to that of a powerful hand-lens) to about x 250,000, about 250 times the magnification limit of the best light microscopes. Back-scattered electrons (BSE) are beam electrons that are reflected from the sample by elastic scattering. BSE are often used in analytical SEM along with the spectra made from the characteristic x-rays. Because the intensity of the BSE signal is strongly related to the atomic number (Z) of the specimen, BSE images can provide information about the distribution of different elements in the sample. For the same reason BSE imaging can image colloidal gold immuno-labels of 5 or 10 nm diameter, that would otherwise be difficult or impossible to detect in secondary electron images in biological specimens. Characteristic X-rays are emitted when the electron beam removes an inner shell electron from the sample, causing a higher energy electron to fill the shell and release energy. These characteristic x-rays are used to identify the composition and measure the abundance of elements in the sample.

[ Last edited by nanolab289 on 2010-9-7 at 11:45 ]
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

nanolab289

银虫 (小有名气)

没有学过腐蚀,老师让翻译这些资料,难呢.所以请高手帮助一下.
10楼2010-08-19 14:32:40
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 22 个回答

nanolab289

银虫 (小有名气)

该段内容以2金币答谢

nanolab289:编辑内容 2010-09-07 11:46
In a typical SEM, an electron beam is thermionically emitted from an electron gun fitted with a tungsten filament cathode. Tungsten is normally used in thermionic electron guns because it has the highest melting point and lowest vapour pressure of all metals, thereby allowing it to be heated for electron emission, and because of its low cost. Other types of electron emitters include lanthanum hexaboride (LaB6) cathodes, which can be used in a standard tungsten filament SEM if the vacuum system is upgraded and field emission guns (FEG), which may be of the cold-cathode type using tungsten single crystal emitters or the thermally-assisted Schottky type, using emitters of zirconium oxide.
完成该部分内容以2个金币答谢.

[ Last edited by nanolab289 on 2010-9-7 at 11:46 ]
2楼2010-08-18 15:33:59
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

nanolab289

银虫 (小有名气)

nanolab289:编辑内容 2010-09-07 11:46
The electron beam, which typically has an energy ranging from a few hundred eV to 40 keV, is focused by one or two condenser lenses to a spot about 0.4 nm to 5 nm in diameter. The beam passes through pairs of scanning coils or pairs of deflector plates in the electron column, typically in the final lens, which deflect the beam in the x and y axes so that it scans in a raster fashion over a rectangular area of the sample surface.---------------------------
完成此段内容以3个金币答谢

[ Last edited by nanolab289 on 2010-9-7 at 11:46 ]
3楼2010-08-18 15:35:00
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

xiaoxiaote

金虫 (正式写手)


小木虫(金币+0.5):给个红包,谢谢回帖交流
用金币答谢,这也太会开玩笑了~~~~
5楼2010-08-18 17:22:05
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见