24小时热门版块排行榜    

查看: 1617  |  回复: 12
本帖产生 1 个 翻译EPI ,点击这里进行查看
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

gylovejing

[交流] 中译英(30金币求翻译某产品使用说明)谢绝软件

请将以下文字翻译成英文,难度应该不是很大,为某产品使用说明,谢绝软件翻译

使用说明
清洁表面:使用前必须清洁被沾表面,可用丙酮或酒精去除油污杂质,并使之干燥。雨季或冬季施工前应先用电吹风将被沾表面吹干后再粘接,会取得最佳粘接效果。
操作:滴涂适量胶液于工件表面,压合,定位并挤出气泡;在UV灯下照射10-15秒,待工件初固定位后,清理多余胶水,继续照射至完全固话。UV灯波普,能量,照射距离可能会影响实际粘接效果。如工件时浮法玻璃,不宜在锡面粘接。
注意事项:本品对皮肤有轻微刺激,如不慎溅入眼睛,应立即用大量清水冲洗,并就医。操作时防止紫外线直射眼睛以防灼伤。
存储:于阴凉、干燥避光处保存,28度以下保质期12个月。本品不含苯及甲醛。无毒,无溶剂,可按危险品运输。

[ Last edited by gylovejing on 2010-7-24 at 02:17 ]

» 猜你喜欢

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

liufengbao100

木虫 (正式写手)

foreverhappy

gylovejing(金币+10):压合用push好还是pressure?pope是波普的意思吗?是的话,uv灯波普可否直接用“uv pope”,请继续,谢谢! 2010-07-24 12:17:05
gylovejing(金币+15):呵呵,谦虚了,非常感谢,不过感觉还有需要修改的地方,我会将译文贴上来,到时候,麻烦您再看看有什么需要修改的 2010-07-24 15:53:00
operation:Spread proper amount of the glue to workpiece surface,pressure,locate and squeeze the bubble. it was illuminated 10-15 seconds in the light of UV,after workpiece was fixed,first,you clean superfluous glue,then continue to illuminate to completely cured. UV lamp Pope, energy and illumination distance  may affect bonding effect.If workpiece is float glass, You cannot adhese in the tin surface.
notices:
This product has a slight irritation to the skin, if it splash into the eyes,you should rinse immediately with plenty of water,and see a doctor .You should prevent ultraviolet light point-blank eyes in order to prevent burns eyes.
Store:Avoid light in a cool, dry place,below 28 ℃ it can save 12 months.This product does not contain benzene and formaldehyde.Without solvent and toxic,according to the transport of dangerous product.
压合我感觉是用pressure较好,pope是波普的意思。英语水平不是很高,仅供参考!呵呵

[ Last edited by liufengbao100 on 2010-7-24 at 14:43 ]
成长总是痛苦的,加油!
4楼2010-07-24 11:11:27
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 13 个回答

liufengbao100

木虫 (正式写手)

foreverhappy


发芽土豆(金币+1):Thx for your participation! 2010-07-24 09:34:13
gylovejing(金币+5, 翻译EPI+1):谢谢,请继续 2010-07-24 10:12:31
Direction for use
clean surface:The touched surface must be cleaned before you use it, we can use acetone or alcohol for removing oil impurities ,and to make it dry.in the rainy season or winter construction ,for adhesiving you will be blown dry surface with a hair drye,which will achieve the best result.
先给你翻译一段,你看行不,行我再接着翻译。

[ Last edited by liufengbao100 on 2010-7-24 at 09:03 ]
成长总是痛苦的,加油!
2楼2010-07-24 09:01:38
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

gylovejing

引用回帖:
Originally posted by liufengbao100 at 2010-07-24 09:01:38:
Direction for use
clean surface:The touched surface must be cleaned before you use it, we can use acetone or alcohol for removing oil impurities ,and to make it dry.in the rainy season or winter  ...

谢谢!请继续!
3楼2010-07-24 09:48:28
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

gylovejing

译文入下,请看看那些地方还需要修改更合适(还剩余10金币)

Direction for use
clean surface:The touched surface must be cleaned before you use it, we can use acetone or alcohol for removing oil impurities ,and to make it dry.in the rainy season or winter construction ,for adhesiving you will be blown dry surface with a hair dryer,which will achieve the best result.

operation:Spread proper amount of the glue to workpiece surface,pressure,locate and squeeze the bubble. it was illuminated 10-15 seconds in the light of UV,after workpiece was fixed,first,you clean superfluous glue,then continue to illuminate to completely cured. UV lamp Pope, energy and illumination distance  may affect bonding effect.If workpiece is float glass,You cannot adhese in the tin-surface.

Attention items :This product has a slight irritation to the skin;eye contact,Flush with plenty of clean running water immediately ,then consult a physician. You should prevent ultraviolet light point-blank eyes in order to avoid ultraviolet light burns the eyes

STORAGE:To be kept avoiding light in a cool, dry place, Quality guarantee for twelve- month,below 28 ℃。This product does not contain benzene and formaldehyde. It is innocuity and has no solvent。according to the transport of dangerous product.
5楼2010-07-24 15:54:33
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复 (可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[考研] 工科材料085601 279求调剂 +3 困于星晨 2026-03-17 3/150 2026-03-17 14:08 by ms629
[考研] 本人考085602 化学工程 专硕 +15 不知道叫什么! 2026-03-15 17/850 2026-03-17 10:13 by Sammy2
[考研] 283求调剂 +3 听风就是雨; 2026-03-16 3/150 2026-03-17 07:41 by 热情沙漠
[考研] 11408 一志愿西电,277分求调剂 +3 zhouzhen654 2026-03-16 3/150 2026-03-17 07:03 by laoshidan
[考研] [导师推荐]西南科技大学国防/材料导师推荐 +3 尖角小荷 2026-03-16 6/300 2026-03-16 23:21 by 尖角小荷
[考研] 333求调剂 +3 文思客 2026-03-16 7/350 2026-03-16 18:21 by 文思客
[考研] 304求调剂 +4 ahbd 2026-03-14 4/200 2026-03-16 16:48 by 我的船我的海
[考研] 312求调剂 +3 陌宸希 2026-03-16 4/200 2026-03-16 15:06 by peike
[考研] 0703化学调剂 290分有科研经历,论文在投 +7 腻腻gk 2026-03-14 7/350 2026-03-16 10:12 by houyaoxu
[考研] 326求调剂 +3 mlpqaz03 2026-03-15 3/150 2026-03-16 07:33 by Iveryant
[考研] 297一志愿上交085600求调剂 +5 指尖八千里 2026-03-14 5/250 2026-03-14 17:26 by a不易
[考研] 255求调剂 +3 李嘉慧, 2026-03-12 4/200 2026-03-14 16:58 by 有只狸奴
[基金申请] 有必要更换申报口吗 20+3 fannyamoy 2026-03-11 3/150 2026-03-14 00:52 by zhanghaozhu
[考研] 四川大学085601材料工程专硕 初试294求调剂 +4 祝我们好在冬天 2026-03-11 4/200 2026-03-13 21:39 by peike
[考研] 考研调剂 +4 芬达46 2026-03-12 4/200 2026-03-13 16:04 by ruiyingmiao
[考研] 070303一志愿西北大学学硕310找调剂 +3 d如愿上岸 2026-03-13 3/150 2026-03-13 10:43 by houyaoxu
[考研] 290求调剂 +3 ADT 2026-03-13 3/150 2026-03-13 10:19 by peike
[考研] 283求调剂,材料、化工皆可 +8 苏打水7777 2026-03-11 10/500 2026-03-13 09:06 by Linda Hu
[考研] 333求调剂 +3 152697 2026-03-12 4/200 2026-03-13 07:08 by Iveryant
[考研] 298求调剂 +3 Vv呀! 2026-03-10 3/150 2026-03-10 22:40 by 剑诗杜康
信息提示
请填处理意见