| 查看: 1373 | 回复: 13 | |||
| 本帖产生 1 个 翻译EPI ，点击这里进行查看 | |||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | |||
jfr_1983金虫 (小有名气)
|
[交流]
摘要修改
|
||
|
It’s one of the key approaches for iron and steel corporations to efficiently recover the waste heat resources which are used to preheat sinter mixture in order to reduce energy consumption in the sintering process before the ignition device. Centered on the thermal performance of the sinter mixture in the drying process, mechanistic experiments such as differential thermal gravimetric analysis，forced air drying and the tunnel flashing drying, which are based on different focus, are carried out, including a series of experiments of level 10mg, level 10g, and level 100g respectively. The experimental results show that sinter mixture is a typical “three-period” drying materials, that is, the entire drying process consists of shorter rising rate period，longer constant rate period and falling rate period. At the beginning, the drying rate is faster, and then slower. Greater drying rate and the corresponding drying time is in the first 5-7 minutes when the moisture content of sinter mixture is 0.055~0.06kg (water)/kg (material) based on the experimental conditions. In the experiment of tunnel flashing drying, critical moisture content of sinter mixture is about 2.3~3.0%. The temperature and flow rate of hot air are the main factors affect the drying rate, within a certain range, the higher the air temperature the greater the flow as well as the drying rate, the effect of strengthening drying is more obvious. Both hot air temperature and flow should have an appropriate scope dues to the discrepancies exist in the effect of strengthening drying by improving the temperature and flow in different interval. Therefore, sinter mixture is easy to dry, and the existing low temperature waste heat is able to achieve sinter mixture’ drying. 求助 摘要修改~！！谢谢 |
回复此楼» 猜你喜欢
急需调剂
已经有8人回复
-
申博/考博
已经有4人回复
-
化工学硕294分，求导师收留
已经有37人回复
-
求调剂
已经有11人回复
-
260求调剂
已经有4人回复
-
一志愿华中农业071010，320求调剂
已经有19人回复
-
304求调剂
已经有7人回复
-
求博导｜生物质基多孔碳/超级电容方向，已有相关成果，寻能源材料/碳材料方向老师
已经有3人回复
-
二苯甲酮酸类衍生物
已经有6人回复
-
接受任何调剂
已经有4人回复
jfr_1983
金虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 1043.5
- 散金: 10
- 帖子: 227
- 在线: 56.1小时
- 虫号: 703484
- 注册: 2009-02-18
- 专业: 金属材料的微观结构
10楼2010-05-27 15:37:21
★ ★ ★
sirljz(金币+1):谢谢交流 2010-05-10 20:30:39
sirljz(金币+2):欢迎新虫 2010-05-10 20:30:52
jfr_1983(金币+5):请再帮我看看我修改的第二稿，谢谢 2010-05-22 11:25:14
sirljz(金币+1):谢谢交流 2010-05-10 20:30:39
sirljz(金币+2):欢迎新虫 2010-05-10 20:30:52
jfr_1983(金币+5):请再帮我看看我修改的第二稿，谢谢 2010-05-22 11:25:14
| in order to reduce energy consumption， efficiently recover the waste heat which are used to preheat sinter mixturein before the ignition device. mechanistic experiments such as differential thermal gravimetric analysis，forced air drying and the tunnel flashing drying are carried out, including a series of experiments of level 10mg, level 10g, and level 100g respectively. The experimental results show that sinter mixture is a typical “three-period” drying materials, the entire drying process consists of shorter rising rate period，longer constant rate period and falling rate period. Greater drying rate and the corresponding drying time is in the first 5-7 minutes when the moisture content of sinter mixture is 0.055~0.06kg (water)/kg (material) based on the experimental conditions. In the experiment of tunnel flashing drying, critical moisture content of sinter mixture is about 2.3~3.0%. The temperature and flow rate of hot air are the main factors affect the drying rate, within a certain range, the higher the air temperature the greater the flow as well as the drying rate, the effect of strengthening drying is more obvious. Both hot air temperature and flow should have an appropriate scope dues to the discrepancies exist in the effect of strengthening drying by improving the temperature and flow in different interval. |
2楼2010-05-10 15:33:20
★ ★
sirljz(金币+2):谢谢交流 2010-05-10 20:31:17
jfr_1983(金币+5, 翻译EPI+1):请再帮我看看，我又改了第二稿 2010-05-22 11:24:34
sirljz(金币+2):谢谢交流 2010-05-10 20:31:17
jfr_1983(金币+5, 翻译EPI+1):请再帮我看看，我又改了第二稿 2010-05-22 11:24:34
| 大概改了一下，摘要中要用过去式，还有，楼主用的长句子太多，最好长短穿插。In order to reduce energy consumption in the sintering process before the ignition device， one of the key approaches for iron and steel corporations to efficiently recover the waste heat resources used to preheat sinter mixture. Centered on the thermal performance of the sinter mixture in the drying process, mechanistic experiments such as differential thermal gravimetric analysis，forced air drying and the tunnel flashing drying based on different focus, are carried out, including a series of experiments of level 10mg, level 10g, and level 100g(,) respectively. The experimental results show(ed) that sinter mixture is（was） a typical “three-period” drying materials, that is, the entire drying process consists（ed） of shorter rising rate period，longer constant rate period and falling rate period. At the beginning, the drying rate is faster(fast), and then slower(slow down). Greater drying rate and the corresponding drying time is in the first 5-7 minutes when the moisture content of sinter mixture is 0.055~0.06kg (water)/kg (material) based on the experimental conditions. In the experiment of tunnel flashing drying, critical moisture content of sinter mixture is about 2.3~3.0%. The temperature and flow rate of hot air are the main factors affect the drying rate, within a certain range, the higher the air temperature (is,) the greater the flow as well as the drying rate, the effect of strengthening drying is more obvious. Both hot air temperature and flow should have an appropriate scope dues to the discrepancies exist in the effect of strengthening drying by improving the temperature and flow in different interval(s). Therefore, sinter mixture is easy to dry, and the existing low temperature waste heat is able to achieve sinter mixture’ drying. |
3楼2010-05-10 16:59:49
jfr_1983
金虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 1043.5
- 散金: 10
- 帖子: 227
- 在线: 56.1小时
- 虫号: 703484
- 注册: 2009-02-18
- 专业: 金属材料的微观结构
4楼2010-05-19 19:26:31
