24小时热门版块排行榜    

CyRhmU.jpeg
查看: 809  |  回复: 2
本帖产生 1 个 翻译EPI ,点击这里进行查看

lcc830306

银虫 (小有名气)

[交流] 求助翻译一小段

For the preparation of CeO2 nanoparticles, cerium nitrate and azodicarbonamide were used as starting materials and other materials were used as additives. Typically, 0.434 g Ce(NO3)3 ¢ 9H2Owas dissolved in 50mLdoubly distilledwater,
and 0.11 g AZOwas added to the aqueous solution of Ce(NO3)3. This is followed by the addition of a different amount of additives.The solution was sonicated at room temperature for 3 h by a high-intensity ultrasonic probe (Misonix, XL sonifier, 1.13-cm-diameter Ti horn, 20 KHz, 100 W/cm2). During sonication,the temperature of the reaction mixture rose to ca. 80±C. The suspension was then centrifuged, and the precipitate was washed with distilled water and ethanol and then dried under vacuum at room temperature. A yellow fine powder was obtained. The pH of the solution is measured before and after the sonication and is found to increase after the reaction.
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

rendvgv

新虫 (初入文坛)

lcc830306(金币+15, 翻译EPI+1):翻译的不错,谢谢 2010-05-04 11:01
为了制备纳米氧化铈,我们以硝酸铈和偶氮甲酰胺作为起始原料,其他的物质作为添加剂。通常,将0.434g的Ce(NO3)3•9H2O(该物质名称的翻译需要确认下给的英文原文)溶解在50ml的双蒸馏水中形成溶液,再向该溶液中加入0.11g的偶氮,接着加入不同量的各种添加剂。该溶液在室温下由一个高强度的超声探头(Misonix, XL sonifier, 1.13cm直径的Ti探头, 超声频率20 KHz, 功率100 W/cm2)进行超声辐射3h。在超声辐射的过程中,反应混合物的温度升到了约80摄氏度左右。然后将得到的悬浮物通过离心分离,将得到的沉淀物分别经过蒸馏水洗涤和乙醇洗涤,再在室温下进行真空干燥。最终得到一种黄色的细粉。在超声辐照前后分别对溶液的pH值进行了测量,发现超声后pH值有所上升。
为自己描绘一个梦想,放飞吧!
2楼2010-05-03 21:42:22
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

benmao_mogu

铁杆木虫 (著名写手)

lcc830306(金币+5):谢谢 补充 2010-05-04 11:02
我们以硝酸铈和偶氮二甲酰胺为原料,其他物质为添加剂来制备纳米CeO2,。通常,将0.434gCe(NO3)3 ¢9H2O(分子式不太理解)溶解在50ml的二次蒸馏水中形成溶液,再向该溶液中加入0.11g的偶氮,接着加入不同量的添加剂。在室温下将该溶液用高强度的超声波探头(Misonix, XL 声波降解器,直径1.13cmTi探头, 超声频率20 KHz, 功率100 W/cm2)声处理3h。声处理期间,反应混合物的温度升至约80℃。将悬浮物离心处理,得到的沉淀物用蒸馏水和乙醇洗涤之后,再在室温下进行真空干燥。最终得到黄色细粉末。声波降解前后对溶液的pH值测量发现反应后pH值较之有所上升。
希望对楼主有所帮助!!
不拼搏,怎能享受美好生活
3楼2010-05-04 10:06:21
已阅   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 lcc830306 的主题更新
信息提示
请填处理意见