24小时热门版块排行榜    

CyRhmU.jpeg
查看: 653  |  回复: 10
当前主题已经存档。
本帖产生 1 个 翻译EPI ,点击这里进行查看
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

lxhlxh052c

木虫 (著名写手)

小木虫之无虫

[交流] 求高手翻译(不要翻译软件修改修改的)

首先将丙烯酰胺、季戊四醇和硝酸铈铵分别配制成一定浓度的水溶液。向反应瓶中加入50mL的AM溶液和一定体积的季戊四醇溶液。反应瓶经充分除氧后密封,用注射器向反应瓶中加入一定量的硝酸铈铵溶液,震荡反应瓶,混合均匀,然后将反应瓶置入一定温度的恒温槽中,反应一定时间,用一定量的丙酮沉淀。沉淀物经机械切碎后,在丙酮中浸泡24h,室温烘干再经丙酮回流数小时,除去单体,在25℃真空烘箱中烘干至恒重。


谢谢高手帮忙!!!

» 猜你喜欢

这就是我想要的
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

lastzealot

新虫 (著名写手)

【乱世的奸雄】

水平有限,请lz仔细检查。
3楼2010-04-20 14:00:11
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 11 个回答

lastzealot

新虫 (著名写手)

【乱世的奸雄】

lxhlxh052c(金币+10): 2010-04-21 09:56
First of all, acrylamide, pentaerythrite and ammonium ceric nitrate were mixed by some concentration in an aqueous solution. 50 mL AM solution and a certain amount of pentaerythrite were added into the reaction flask, followed by deoxidization. Then some ammonium ceric nitrate was injected with a syringe, and a little vibration was made to obtain a uniform solution. The reaction system was kept in a thermostatic bath for a certain period of time. Then acetone was employed to precipitate the resultant. The product was squeezed the immersed in the acetone for 24 h. Drying was done at ambient temperature and refluxed in acetone for hours to get rid of monomers. Finally, a vacuum oven was used to dry the product to a constant weight.

[ Last edited by lastzealot on 2010-4-20 at 20:21 ]
2楼2010-04-20 13:59:44
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

melody-yhl

木虫 (著名写手)

职业写手

晚上回家再看,呵呵
专利代理人
4楼2010-04-20 16:22:33
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

lvdq44

木虫 (著名写手)

供参考

lxhlxh052c(金币+10, 翻译EPI+1): 2010-04-21 09:56
引用回帖:
Originally posted by lxhlxh052c at 2010-04-20 13:26:03:
首先将丙烯酰胺、季戊四醇和硝酸铈铵分别配制成一定浓度的水溶液。向反应瓶中加入50mL的AM溶液和一定体积的季戊四醇溶液。反应瓶经充分除氧后密封,用注射器向反应瓶中加入一定量的硝酸铈铵溶液,震荡反应瓶,混合 ...

Firstly,prepare the water solutions of  given concentrations of acrylamide,pentaerythritol and ammonium cerium nitrate respectively. Add 50 ml of AM solution and a given volume of pentaerythritol solution to a reaction flask which is sealed after sufficient deoxigenation.Then add a given amount of ammonium cerium nitrate solution by injection,and mix it well by shaking the flask.Then put the flask in a thermostatic bath of a given temperature. After a given reaction duration,precipitate the mixture with a given amount of acetone.After being shredded michanically,the precipitate is immersed in acetone for 24h,and dried under room temperature ,and then distilled with acetone for a few hours in a column equipped with a reflux condenser to remove the monomer.Finally,the precipitate is dried to constant weight at 25 C in a vacuum oven.
5楼2010-04-21 01:01:02
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复(可上传附件)
信息提示
请填处理意见