应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台» 学术交流区» 论文翻译 » 论文翻译求助完结子版 » 求助医学方向英文翻译（求助有效期至12月20日12时）
81/1返回列表
查看: 449  |  回复: 7
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看
当前主题已经存档。

晴朗

荣誉版主 (知名作家)

广庭诗社之boss姐姐

优秀版主

[交流] 求助医学方向英文翻译（求助有效期至12月20日12时）

帮忙翻译一段话。加急，万分感谢！！不要在线翻译的啊。


目的：本实验采用三维有限元方法建立平台转换种植系统的模型，分析平台转换种植系统应用于前牙时，种植体植入不同深度的应力分布情况。方法：联合利用Solidwork2007机械设计软件和Ansys Workbench 有限元分析软件分析平台转换种植形式和传统的平齐对接形式的种植体分别植入于平牙槽嵴水平（bonelevel）、牙槽嵴下1mm水平(minus1)、牙槽嵴下2mm水平(minus2)的应力分布情况。结果：平台转换组中牙槽嵴顶骨质的应力值随种植体植入深度加深而有效降低，应力值均比平齐对接组小，而平齐对接组没有随种植体深入种植发生明显变化。垂直加载下，各个模型中平台转换基台的应力分布基本相似，与种植水平无明显的相关性，而平齐对接基台的应力分布随着种植水平的下降有明显的变化，呈逐渐上移的趋势；各个种植水平中两组种植体的应力分布情况基本相似，与种植水平无明显的相关性；在平台转换组中，皮质骨的应力分布随种植水平的下移而下移，而平齐对接组中皮质骨的应力始终集中于牙槽嵴顶与基台相接处，不随种植体植入水平改变而改变，且其应力分布比平台转换组集中；两组模型中松质骨的应力分布没有明显的变化。水平加载下各模型的应力分布规律与垂直组相似，不同的是基台、种植体的最大应力值主要集中在它们相应部位的颊侧。皮质骨中，颊侧的应力明显较垂直加载组集中。结论：平台转换种植系统种植体植于牙槽嵴顶下水平可以改善牙槽嵴顶应力分布情况，比传统的平齐对接有明显的优势，水平方向的分力将增加牙槽嵴顶骨组织受力应尽量避免。
回复此楼

» 猜你喜欢
日日深杯酒满，朝朝小圃花开，自歌自舞自开怀，无拘无束无碍。
1楼 2009-12-18 12:00:04
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syh9288

捐助贵宾 (著名写手)

海军上将
我来试试
回复此楼
人生如梦，一樽还酹江月
2楼2009-12-18 13:05:45
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syh9288

捐助贵宾 (著名写手)

海军上将
purpose: in this experiment the model of Platform Conversion implant system is established by adopting three-dimensional finite element method to and the Stress distribution condition that implant can be planted into various depth is analyzed when platform conversion implant systems is applied in front teeth.
赞一下 回复此楼
人生如梦，一樽还酹江月
3楼2009-12-18 13:26:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syh9288

捐助贵宾 (著名写手)

海军上将
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
晴朗(金币+30,VIP+0):多谢阁下啊，后面的请继续好不？ 12-18 14:11
Methods:make use of Solidwork207(mechanical design software)and Ansys Workbench(Finite Element Analysis Software) to analyze the Stress distribution condition when impant in the form of platform conversion implant and in the traditional abreast and abutting form are respectivlely
planted into the level of alveolar ridge(bonelevel),1mm below bonelevel(minus 1),2mm below bonelevel(mins 2).
赞一下(12人) 回复此楼
人生如梦，一樽还酹江月
4楼2009-12-18 13:53:52
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

fenfen0922

金虫 (正式写手)
都是牛人
回复此楼
5楼2009-12-18 14:29:54
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syh9288

捐助贵宾 (著名写手)

海军上将
Results: the deeper imlpant is planted,the more alveolar creat's bony stress
in the group of platform conversion form is effectively reduced,but the
alveolar creat's bony stress in the group of the abreast and abutting form
stress have no changes as implant being palnted deeper.under vertical
loading the stress distribution in the every model's based-station of
platform conversion is basically similar, having no significant correlation
with the planting level, while the stress distribution in the abreast and
abutting base station have a significant change:gradually trending up,with  
the decrease in the planting level; the stress distribution of two groups of

implant in every planting level basically similar, having no obivious
correlation with the planting level;In the group of platform conversion, the
stress distribution of cortical bone shifts down as the planting level move
down,while in the abreast and abutting group the stress distribution of
cortical bone always focused on the joint between alveolar ridge top and
based-station, having on change with the planting level changing, which is
more concentrated than that in the group of paltform conversion;the stess
distribution of cancellous bone in two groups of models  of the has no
obvious changes. the distribution law of stress under the horizontal loading
is smiliar with that under the vertical,the difference between them is that
based-station and the biggest stress value of implant mainly concentrated in
their corresponding buccal parts.in Cortical bone, buccal stress is
obviously more concentrated than that in the vertical loading group.
赞一下 回复此楼
人生如梦，一樽还酹江月
6楼2009-12-18 14:55:59
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syh9288

捐助贵宾 (著名写手)

海军上将
Results: the deeper imlpant is planted,the more alveolar creat's bony stress

in the group of platform conversion form is effectively reduced,but the

alveolar creat's bony stress in the group of the abreast and abutting form

stress have no changes as implant being palnted deeper.under vertical

loading the stress distribution in the every model's based-station of

platform conversion is basically similar, having no significant correlation

with the planting level, while the stress distribution in the abreast and

abutting base station have a significant change:gradually trending up,with  

the decrease in the planting level; the stress distribution of two groups of

implant in every planting level basically similar, having no obivious

correlation with the planting level;In the group of platform conversion, the

stress distribution of cortical bone shifts down as the planting level move

down,while in the abreast and abutting group the stress distribution of

cortical bone always focused on the joint between alveolar ridge top and

based-station, having on change with the planting level changing, which is

more concentrated than that in the group of paltform conversion;the stess

distribution of cancellous bone in two groups of models  of the has no

obvious changes. the distribution law of stress under the horizontal loading

is smiliar with that under the vertical,the difference between them is that

based-station and the biggest stress value of implant mainly concentrated in

their corresponding buccal parts.in Cortical bone, buccal stress is

obviously more concentrated than that in the vertical loading group.
赞一下 回复此楼
人生如梦，一樽还酹江月
7楼2009-12-18 14:57:35
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syh9288

捐助贵宾 (著名写手)

海军上将

完了，自己在我的基础上再修改一下

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
晴朗(金币+30,VIP+0):辛苦了！！谢谢谢谢！！！ 12-18 15:22
Conclusion: planting implants of platform conversion system into the level below the alveolar ridge top can improve the stress distribution, having obvious advantages over the traditional abreast and abutting form ,the condition that component force in horizontal direction will increase the stress on the parietal of alveolar ridge should be avoided.
赞一下(6人) 回复此楼
人生如梦，一樽还酹江月
8楼2009-12-18 15:06:08
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 晴朗 的主题更新
81/1返回列表
普通表情 龙 兔 虎 猫 高级回复 (可上传附件)
信息提示
关闭
请填处理意见
关闭