24小时热门版块排行榜    

查看: 860  |  回复: 5
当前主题已经存档。

dongdyp

金虫 (正式写手)

[交流] 【求助】autogrid4运行错误

严格按照中文操作手册实行,中间并未发现任何异常,最后却说打不开相关文件,请高人指点
Running: autogrid4 -p C:\Python25\Lib\site-packages\MGLToolsPckgs\AutoDockTools\bin\my project\3B9N.gpf

       _______________________________________________________

__________//____________________________/////_________________/________
_________/__/____________/_____________/______________/_______/________
________/____/___________/_____________/______________________/________
________/____/__/_____/_/////___/////__/__////_/_///__/__////_/________
_______/______/_/_____/__/_____/_____/_/_____/_//___/_/_/____//________
_______////////_/_____/__/_____/_____/_/_____/_/______/_/_____/________
_______/______/_/____//__/___/_/_____/_/_____/_/______/_/____//________
_______/______/__////_/___///___/////___/////__/______/__////_/________

       _______________________________________________________

                                ______
                               /      \
                              /        \
                             /          \
                             \    /\    /
                              \  /  \  /
                               \/ /\ \/
                                 /  \
                                /____\


                ______________________________________
               |                                      |
               |            AutoGrid 4.2.2            |
               |                                      |
               |        Garrett M. Morris, TSRI       |
               |            Ruth Huey, TSRI           |
               |        David S. Goodsell, TSRI       |
               |         Arthur J. Olson, TSRI        |
               |                                      |
               |        (C) 1989-2009, TSRI           |
               |   The Scripps Research Institute     |
               |______________________________________|

                ______________________________________
               |                                      |
               | Calculation of van der Waals, H-Bond,|
               |   Electrostatic Potential Energy, &  |
               |   Desolvation Free Energy Grid Maps  |
               |             for AutoDock             |
               | For help, email autodock@scripps.edu |
               |______________________________________|




                           $Revision: 1.72 $



Maximum number of maps that can be computed = 16 (defined by MAX_MAPS in "autocomm.h".


This file was created at:                        4:16 01" p.m., 12/01/2009
                   using:                        "192bc95cf405430"


Setting up parameter library with AutoDock default Unbound_Same_As_Bound values.


Free energy coefficient for the van der Waals term =         0.1662

Free energy coefficient for the H-bonding term     =         0.1209

Free energy coefficient for the electrostatic term =         0.1406

Free energy coefficient for the desolvation term   =         0.1322

Free energy coefficient for the torsional term     =         0.2983

Parameters for the atom type "H" were initialised with the following default values:

        R-eqm = 2.00 Angstrom,  weighted epsilon = 0.003,
        At.frag.vol. = 0.000,  At.solv.par. = 0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 3

Parameters for the atom type "HD" were initialised with the following default values:

        R-eqm = 2.00 Angstrom,  weighted epsilon = 0.003,
        At.frag.vol. = 0.000,  At.solv.par. = 0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 2,  bond index = 3

Parameters for the atom type "HS" were initialised with the following default values:

        R-eqm = 2.00 Angstrom,  weighted epsilon = 0.003,
        At.frag.vol. = 0.000,  At.solv.par. = 0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 1,  bond index = 3

Parameters for the atom type "C" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "A" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "N" were initialised with the following default values:

        R-eqm = 3.50 Angstrom,  weighted epsilon = 0.027,
        At.frag.vol. = 22.449,  At.solv.par. = -0.002,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 1

Parameters for the atom type "NA" were initialised with the following default values:

        R-eqm = 3.50 Angstrom,  weighted epsilon = 0.027,
        At.frag.vol. = 22.449,  At.solv.par. = -0.002,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 4,  bond index = 1

Parameters for the atom type "NS" were initialised with the following default values:

        R-eqm = 3.50 Angstrom,  weighted epsilon = 0.027,
        At.frag.vol. = 22.449,  At.solv.par. = -0.002,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 3,  bond index = 1

Parameters for the atom type "OA" were initialised with the following default values:

        R-eqm = 3.20 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 17.157,  At.solv.par. = -0.003,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 5,  bond index = 2

Parameters for the atom type "OS" were initialised with the following default values:

        R-eqm = 3.20 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 17.157,  At.solv.par. = -0.003,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 3,  bond index = 2

Parameters for the atom type "F" were initialised with the following default values:

        R-eqm = 3.09 Angstrom,  weighted epsilon = 0.013,
        At.frag.vol. = 15.448,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Mg" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 1.560,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "MG" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 1.560,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "P" were initialised with the following default values:

        R-eqm = 4.20 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 38.792,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 5

Parameters for the atom type "SA" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 33.510,  At.solv.par. = -0.002,
        Hb R-eqm = 2.500,  weighted Hb epsilon = 0.121,
        Hb type = 5,  bond index = 6

Parameters for the atom type "S" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 33.510,  At.solv.par. = -0.002,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 6

Parameters for the atom type "Cl" were initialised with the following default values:

        R-eqm = 4.09 Angstrom,  weighted epsilon = 0.046,
        At.frag.vol. = 35.824,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "CL" were initialised with the following default values:

        R-eqm = 4.09 Angstrom,  weighted epsilon = 0.046,
        At.frag.vol. = 35.824,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Ca" were initialised with the following default values:

        R-eqm = 1.98 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 2.770,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "CA" were initialised with the following default values:

        R-eqm = 1.98 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 2.770,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Mn" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 2.140,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "MN" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 2.140,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Fe" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.002,
        At.frag.vol. = 1.840,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "FE" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.002,
        At.frag.vol. = 1.840,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Zn" were initialised with the following default values:

        R-eqm = 1.48 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 1.700,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "ZN" were initialised with the following default values:

        R-eqm = 1.48 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 1.700,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Br" were initialised with the following default values:

        R-eqm = 4.33 Angstrom,  weighted epsilon = 0.065,
        At.frag.vol. = 42.566,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "BR" were initialised with the following default values:

        R-eqm = 4.33 Angstrom,  weighted epsilon = 0.065,
        At.frag.vol. = 42.566,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "I" were initialised with the following default values:

        R-eqm = 4.72 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 55.059,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Z" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "G" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "GA" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "J" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "Q" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

GPF> receptor 3B9N.pdbqs                  # macromolecule

autogrid4: ERROR:  can't find or open receptor PDBQT file "3B9N.pdbqs".



autogrid4: ERROR:  Unsuccessful completion.




Receptor Input File :        3B9N.pdbqs

Receptor Atom Type Assignments:


autogrid4: ERROR:  can't find or open receptor PDBQT file "3B9N.pdbqs".



autogrid4: ERROR:  Unsuccessful completion.

[ Last edited by dongdyp on 2009-12-1 at 17:14 ]
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

javacfish

金虫 (小有名气)

★ ★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
zeoliters(金币+2,VIP+0):多谢回帖交流! 12-8 14:59
找不到"3B9N.pdbqs".
先按照我这个例子在运行一遍。
http://download.csdn.net/source/1863350

里面有运行完的实例,你比较一下吧
2楼2009-12-01 17:21:23
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

fmj121

铜虫 (小有名气)

★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
zeoliters(金币+1,VIP+0):多谢回帖交流! 12-8 15:00
在做box的时候应该先选定一下再保存
3楼2009-12-07 15:53:19
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

arthurii

木虫 (正式写手)


zeoliters(金币+1,VIP+0):多谢回帖交流! 12-8 15:00
引用回帖:
Originally posted by fmj121 at 2009-12-7 15:53:
在做box的时候应该先选定一下再保存

请教,我也遇到这个问题,在grid box的时候,调完坐标,save还不行吗?
需要另外选定一点啥的?
4楼2009-12-08 12:38:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

fmj121

铜虫 (小有名气)

★ ★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
lei0736(金币+2,VIP+0):谢谢 12-16 13:52
引用回帖:
Originally posted by arthurii at 2009-12-8 12:38:


请教,我也遇到这个问题,在grid box的时候,调完坐标,save还不行吗?
需要另外选定一点啥的?

好久没做了,我记得当初我也是遇见这个问题,后来是这样解决的,在你调完坐标以后,要点选一下file>chose saving current 然后再保存就可以了,希望对你有用!
5楼2009-12-09 15:33:47
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

arthurii

木虫 (正式写手)


小木虫(金币+0.5):给个红包,谢谢回帖交流
引用回帖:
Originally posted by fmj121 at 2009-12-9 15:33:




好久没做了,我记得当初我也是遇见这个问题,后来是这样解决的,在你调完坐标以后,要点选一下file>chose saving current 然后再保存就可以了,希望对你有用!

谢谢指点!
6楼2009-12-09 17:59:27
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 dongdyp 的主题更新
普通表情 高级回复 (可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[考博] 售SCI-T0P文章,我:8O.5.5.1.O.54,科目齐全,可+急 +4 jzg3xk1po8 2026-07-31 12/600 2026-08-01 17:50 by Kddn1pB6pAzX
[基金申请] 售SCI一区文章,我:8.O.55.1.O.54,科目齐全,可伽急 +4 jzg3xk1po8 2026-07-31 12/600 2026-08-01 17:50 by Kddn1pB6pAzX
[教师之家] 售SCI一区T0P文章,我:8.O55.1.O.54,科目全,可十急 +4 jzg3xk1po8 2026-07-31 9/450 2026-08-01 17:43 by Kddn1pB6pAzX
[考研] 售SCI一区T0P文章,我:8.O.55.1.O.5.4,科目全,可+急 +4 jzg3xk1po8 2026-07-31 12/600 2026-08-01 17:43 by Kddn1pB6pAzX
[论文投稿] 售SCI一区T0P文章,我:8.O.55.1.O.54,科目齐全,可+急 +3 jzg3xk1po8 2026-07-31 7/350 2026-08-01 17:42 by Kddn1pB6pAzX
[硕博家园] 售SCI一区文章,我:8.O.551.O.5.4,科目全,可伽急 +3 jzg3xk1po8 2026-07-31 9/450 2026-08-01 17:40 by Kddn1pB6pAzX
[博后之家] 售SCI一区T0P文章,我:8.O55.1.O.54,科目全,可十急 +3 jzg3xk1po8 2026-07-31 9/450 2026-08-01 15:50 by y4XuShGyllvT
[公派出国] 售SCI-T0P文章,我:8O.5.5.1.O.54,科目齐全,可+急 +3 jzg3xk1po8 2026-07-31 6/300 2026-08-01 15:46 by y4XuShGyllvT
[基金申请] 2026年国自然面上资助率 +15 布布和一二 2026-07-30 19/950 2026-08-01 15:18 by 40862026
[基金申请] 微信指数没变化,科研之友没阅读 +14 wangze12014 2026-07-28 18/900 2026-07-31 18:35 by lzchaihuo
[教师之家] 基础研究怎么拉横向,学校到款任务越来越多,难以完成 拉横向,都有哪些途径啊 +8 锦衣卫寒战 2026-07-28 8/400 2026-07-31 18:13 by beefly
[高分子] HXDI做水性聚氨酯乳液,是不是特别容易出渣 15+3 yuyusuv 2026-07-29 3/150 2026-07-31 09:21 by huizingga
[基金申请] 系统今天又提示维护了,估计离放榜不远了 +11 winnerche 2026-07-29 15/750 2026-07-30 23:08 by jnhyjjm
[基金申请] 今年的WR进展到哪一步了? +5 wsgjhwz 2026-07-25 9/450 2026-07-30 12:59 by 可淡不可忘
[有机交流] 产物和副产物价值比较 30+4 小汤02 2026-07-27 5/250 2026-07-30 12:44 by czyzsu
[基金申请] 时间戳他又来了 +14 晓晓爱翠翠 2026-07-26 17/850 2026-07-29 16:30 by 呵呵二哥
[基金申请] 这种情况还有戏吗 +5 drbart 2026-07-27 11/550 2026-07-29 05:50 by drbart
[基金申请] 同事接到电话了,我却没有 +4 1234567wang 2026-07-27 4/200 2026-07-28 10:11 by GOODLUCKER
[基金申请] 准备明年的基金了 +5 Tide man 2026-07-27 5/250 2026-07-28 09:25 by newfuzzy1
[分析] 水蒸气蒸馏法乳化现象 +3 月光娇娇 2026-07-26 3/150 2026-07-26 23:25 by caiyun
信息提示
请填处理意见