|
|
★ ★ ★ ★ ★ ★ ★ guyue_692(金币+7,VIP+0):3q 11-28 11:26
|
Replacement Bearing Seal: In the end cover every point of a seal are installed in two skeleton oil seal, sealing device is usually installed so that a sealing face of the material in isolation from contact with the bearing material, as well as a seal faces sleeve to keep the lubricating oil in good condition, when the machine maintenance, the sealing lip should check at least once a year. Removal of seals, the relieved with the screw fixed to the rotor fixed on the inner surface of cover plate, and then pulled out two separate seals and sealing rings, put into the new sealing gaskets and seals, make sure parts complete alignment and Accessibility. We provide the machine with the assembly tested to ensure that the sealing device is installed correctly, we must ensure that the sealing device in the assembly process will not be damaged. Emergency management: It is recommended drum parts in the new parts used in operation up to 2000 hours or a year should be a thorough examination. Mentioned earlier, the critical range of visual inspection and double-check the link bolts are necessary. Within the scope of this manual may be impossible to mention every one at any time in need of repair or need other types of maintenance work, but based on years of work experience, this manual deals with the maintenance procedures for your machine can basically most of the maintenance requirements. |
|