24小时热门版块排行榜    

查看: 835  |  回复: 5
当前主题已经存档。
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

arthurii

木虫 (正式写手)

[交流] 【求助】Autogrid的时候Error2,修改了路径有一个乱码的错误

Running: autogrid4 -p E:\csb\temp\123.gpf
[Error 2]

选定autogrid4.exe后,运行是开始了,但是又有错误。

Running: E:\csb\temp\autogrid4.exe -p E:\csb\temp\123.gpf

       _______________________________________________________

__________//____________________________/////_________________/________
_________/__/____________/_____________/______________/_______/________
________/____/___________/_____________/______________________/________
________/____/__/_____/_/////___/////__/__////_/_///__/__////_/________
_______/______/_/_____/__/_____/_____/_/_____/_//___/_/_/____//________
_______////////_/_____/__/_____/_____/_/_____/_/______/_/_____/________
_______/______/_/____//__/___/_/_____/_/_____/_/______/_/____//________
_______/______/__////_/___///___/////___/////__/______/__////_/________

       _______________________________________________________

                                ______
                               /      \
                              /        \
                             /          \
                             \    /\    /
                              \  /  \  /
                               \/ /\ \/
                                 /  \
                                /____\


                ______________________________________
               |                                      |
               |            AutoGrid 4.2.1            |
               |                                      |
               |        Garrett M. Morris, TSRI       |
               |            Ruth Huey, TSRI           |
               |        David S. Goodsell, TSRI       |
               |         Arthur J. Olson, TSRI        |
               |                                      |
               |        (C) 1989-2009, TSRI           |
               |   The Scripps Research Institute     |
               |______________________________________|

                ______________________________________
               |                                      |
               | Calculation of van der Waals, H-Bond,|
               |   Electrostatic Potential Energy, &  |
               |   Desolvation Free Energy Grid Maps  |
               |             for AutoDock             |
               | For help, email autodock@scripps.edu |
               |______________________________________|




                           $Revision: 1.71 $



Maximum number of maps that can be computed = 16 (defined by MAX_MAPS in "autocomm.h".


This file was created at:                        11:51 31" a.m., 08/21/2009
                   using:                        "zsu-7077a27a02a"


Setting up parameter library with AutoDock default Unbound_Same_As_Bound values.


Free energy coefficient for the van der Waals term =         0.1662

Free energy coefficient for the H-bonding term     =         0.1209

Free energy coefficient for the electrostatic term =         0.1406

Free energy coefficient for the desolvation term   =         0.1322

Free energy coefficient for the torsional term     =         0.2983

Parameters for the atom type "H" were initialised with the following default values:

        R-eqm = 2.00 Angstrom,  weighted epsilon = 0.003,
        At.frag.vol. = 0.000,  At.solv.par. = 0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 3

Parameters for the atom type "HD" were initialised with the following default values:

        R-eqm = 2.00 Angstrom,  weighted epsilon = 0.003,
        At.frag.vol. = 0.000,  At.solv.par. = 0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 2,  bond index = 3

Parameters for the atom type "HS" were initialised with the following default values:

        R-eqm = 2.00 Angstrom,  weighted epsilon = 0.003,
        At.frag.vol. = 0.000,  At.solv.par. = 0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 1,  bond index = 3

Parameters for the atom type "C" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "A" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "N" were initialised with the following default values:

        R-eqm = 3.50 Angstrom,  weighted epsilon = 0.027,
        At.frag.vol. = 22.449,  At.solv.par. = -0.002,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 1

Parameters for the atom type "NA" were initialised with the following default values:

        R-eqm = 3.50 Angstrom,  weighted epsilon = 0.027,
        At.frag.vol. = 22.449,  At.solv.par. = -0.002,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 4,  bond index = 1

Parameters for the atom type "NS" were initialised with the following default values:

        R-eqm = 3.50 Angstrom,  weighted epsilon = 0.027,
        At.frag.vol. = 22.449,  At.solv.par. = -0.002,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 3,  bond index = 1

Parameters for the atom type "OA" were initialised with the following default values:

        R-eqm = 3.20 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 17.157,  At.solv.par. = -0.003,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 5,  bond index = 2

Parameters for the atom type "OS" were initialised with the following default values:

        R-eqm = 3.20 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 17.157,  At.solv.par. = -0.003,
        Hb R-eqm = 1.900,  weighted Hb epsilon = 0.604,
        Hb type = 3,  bond index = 2

Parameters for the atom type "F" were initialised with the following default values:

        R-eqm = 3.09 Angstrom,  weighted epsilon = 0.013,
        At.frag.vol. = 15.448,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Mg" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 1.560,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "MG" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 1.560,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "P" were initialised with the following default values:

        R-eqm = 4.20 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 38.792,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 5

Parameters for the atom type "SA" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 33.510,  At.solv.par. = -0.002,
        Hb R-eqm = 2.500,  weighted Hb epsilon = 0.121,
        Hb type = 5,  bond index = 6

Parameters for the atom type "S" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.033,
        At.frag.vol. = 33.510,  At.solv.par. = -0.002,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 6

Parameters for the atom type "Cl" were initialised with the following default values:

        R-eqm = 4.09 Angstrom,  weighted epsilon = 0.046,
        At.frag.vol. = 35.824,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "CL" were initialised with the following default values:

        R-eqm = 4.09 Angstrom,  weighted epsilon = 0.046,
        At.frag.vol. = 35.824,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Ca" were initialised with the following default values:

        R-eqm = 1.98 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 2.770,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "CA" were initialised with the following default values:

        R-eqm = 1.98 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 2.770,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Mn" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 2.140,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "MN" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.145,
        At.frag.vol. = 2.140,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Fe" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.002,
        At.frag.vol. = 1.840,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "FE" were initialised with the following default values:

        R-eqm = 1.30 Angstrom,  weighted epsilon = 0.002,
        At.frag.vol. = 1.840,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Zn" were initialised with the following default values:

        R-eqm = 1.48 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 1.700,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "ZN" were initialised with the following default values:

        R-eqm = 1.48 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 1.700,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Br" were initialised with the following default values:

        R-eqm = 4.33 Angstrom,  weighted epsilon = 0.065,
        At.frag.vol. = 42.566,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "BR" were initialised with the following default values:

        R-eqm = 4.33 Angstrom,  weighted epsilon = 0.065,
        At.frag.vol. = 42.566,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "I" were initialised with the following default values:

        R-eqm = 4.72 Angstrom,  weighted epsilon = 0.091,
        At.frag.vol. = 55.059,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 4

Parameters for the atom type "Z" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "G" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "GA" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "J" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

Parameters for the atom type "Q" were initialised with the following default values:

        R-eqm = 4.00 Angstrom,  weighted epsilon = 0.025,
        At.frag.vol. = 33.510,  At.solv.par. = -0.001,
        Hb R-eqm = 0.000,  weighted Hb epsilon = 0.000,
        Hb type = 0,  bond index = 0

GPF> npts 40 44 54                        # num.grid points in xyz

Number of grid points in x-direction:        41
Number of grid points in y-direction:        45
Number of grid points in z-direction:        55

GPF> gridfld 1kf1_H9.maps.fld             # grid_data_file

/cygdrive/e/csb/temp/autogrid4: ERROR:  can't create grid dimensions data file 1kf1_H9.maps.fld

/cygdrive/e/csb/temp/autogrid4: ERROR:  Unsuccessful completion.

/cygdrive/e/csb/temp/autogrid4: ERROR:  can't create grid dimensions data file 1kf1_H9.maps.fld

/cygdrive/e/csb/temp/autogrid4: ERROR:  Unsuccessful completion.

试过很多个不同的文件,包括几个练习示例,都是这样。在另一台机上重新装了一次,把文件全部放在默认路劲也是一样。

用VINA可以运行,但是直接在ADT上就用不了。
PS:autogrid4文件是新下载的4.2   MG是1.5.2的


[ Last edited by lei0736 on 2009-11-25 at 13:29 ]
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

liujunhero

新虫 (文学泰斗)

文献杰出贡献文献杰出贡献

★ ★
arthurii(金币+1):谢谢参与
arthurii(金币+1,VIP+0):谢谢 8-25 21:09
估计是版本的兼容性问题
4楼2009-08-25 20:43:05
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 6 个回答

gwdavid

木虫 (著名写手)

小木虫散兵坑坑长

★ ★ ★ ★ ★ ★ ★
arthurii(金币+1):谢谢参与
yjcmwgk(金币+1,VIP+0):感谢交流 8-21 18:43
arthurii(金币+5,VIP+0):谢谢,我再试试先 8-22 08:31
楼主先试试之前的版本可不可以,我看了一下,想不出哪里有问题,都对。
你下一个4.0.1版的试试
个人博客:[url]http://blog.sina.com.cn/gaiwei[/url]
2楼2009-08-21 15:32:10
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

winterose_

铜虫 (小有名气)

★ ★ ★ ★ ★
arthurii(金币+1):谢谢参与
yjcmwgk(金币+2,VIP+0):thankU 8-25 17:34
arthurii(金币+2,VIP+0):正准备这样子,但是MGL的卸载和更换有点麻烦的说…… 8-25 21:09
建议LZ将MGL换成1.5.4的版本,版本不对路很容易出错.
1.5.2对应的是4.0版本,1.5.4对应的是4.2.
换了以后所有的准备文件也要用新版本重新准备一遍,否则Grid没问题,Dock也会有问题地.
3楼2009-08-25 16:56:42
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

syfnet

新虫 (初入文坛)

★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
yjcmwgk(金币+1,VIP+0): 10-15 16:30
你是在adt中做的吗?把参数文件、autodock4、autogrid4都放到c:\document and setting\usr下面,再运行autogrid4试试。
6楼2009-10-14 22:36:38
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 龙 兔 虎 猫 高级回复 (可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[考研] 售SCI一区T0P文章,我:8.O.55.1.O54,科目全,可伽急 +3 FChKX8meu1ds 2026-11-09 5/250 2026-11-11 04:29 by Z7qfCsdIiD1T
[论文投稿] 售SCI一区T0P文章,我:8O.55.1.O.5.4,科目齐全,可+急 +4 cqv1zKnzd7hr 2026-11-09 7/350 2026-11-11 04:21 by Z7qfCsdIiD1T
[论文投稿] 售SCI一区T0P文章,我:8.O.55.1.O.5.4,科目全,可+急 +3 0TEMgxdT1eIw 2026-11-09 6/300 2026-11-11 04:10 by Z7qfCsdIiD1T
[硕博家园] 售SCI文章,我:8O.5.5.1O.54,科目全,可十急 +4 0TEMgxdT1eIw 2026-11-09 6/300 2026-11-11 04:07 by Z7qfCsdIiD1T
[教师之家] 售SCI一区T0P文章,我:8O.55.1.O.5.4,科目齐全,可+急 +3 FChKX8meu1ds 2026-11-09 6/300 2026-11-11 01:32 by Z7qfCsdIiD1T
[考研] 售SCI一区T0P文章,我:8O.55.1.O.5.4,科目齐全,可+急 +3 cqv1zKnzd7hr 2026-11-09 5/250 2026-11-11 01:24 by Z7qfCsdIiD1T
[考研] 售SCI文章,我:8O.5.5.1O.54,科目全,可十急 +4 0TEMgxdT1eIw 2026-11-09 6/300 2026-11-11 01:10 by Z7qfCsdIiD1T
[教师之家] 售SCI一区T0P文章,我:8.O55.1.O.54,科目全,可十急 +4 zSbvVX9JFl9J 2026-11-09 6/300 2026-11-11 01:02 by Z7qfCsdIiD1T
[考研] 售SCI一区文章,我:8.O.55.1.O.54,科目齐全,可伽急 +3 FChKX8meu1ds 2026-11-09 4/200 2026-11-10 22:39 by Z7qfCsdIiD1T
[教师之家] 售SCI一区T0P文章,我:8.O55.1.O.54,科目全,可十急 +4 cqv1zKnzd7hr 2026-11-09 5/250 2026-11-10 20:45 by Z7qfCsdIiD1T
[教师之家] 延安大学回应“副教授留绝笔信”:确已离世,正核实举报内容 +4 yexuqing 2026-11-04 6/300 2026-11-10 11:13 by susizheng
[考博] 售SCI一区文章,我:8.O.55.1.O.54,科目齐全,可伽急 +3 zSbvVX9JFl9J 2026-11-09 4/200 2026-11-10 01:29 by FChKX8meu1ds
[考博] 27博士申请 +3 白白白ly 2026-11-09 3/150 2026-11-09 21:39 by szq0819
[文学芳草园] 厉娜 +3 张丹枫1991 2026-11-09 5/250 2026-11-09 16:53 by 张丹枫1991
[硕博家园] 售SCI一区T0P文章,我:8O.55.1.O.54,科目全,可伽急 +5 5sJFDKp2kwuI 2026-11-06 16/800 2026-11-09 11:47 by GwrQVVR6Oenx
[考研] 售SCI一区T0P文章,我:8O.55.1.O.54,科目全,可伽急 +3 5sJFDKp2kwuI 2026-11-06 12/600 2026-11-09 06:32 by l48hFd8Nwae2
[教师之家] 售SCI一区T0P文章,我:8.O.55.1.O.54,科目齐全,可+急 +4 5sJFDKp2kwuI 2026-11-06 8/400 2026-11-08 23:01 by l48hFd8Nwae2
[公派出国] 售SCI一区T0P文章,我:8.O.55.1.O.54,科目齐全,可+急 +5 ttH3f1oA6ace 2026-11-04 10/500 2026-11-06 16:12 by 5sJFDKp2kwuI
[考研] 售SCI一区T0P文章,我:8.O55.1.O.54,科目全,可十急 +4 ttH3f1oA6ace 2026-11-04 10/500 2026-11-06 02:04 by qL1cU46YIdK0
[硕博家园] 售SCI一区T0P文章,我:8.O55.1.O.54,科目全,可十急 +4 hNpp4Y2CGvSC 2026-11-04 12/600 2026-11-06 01:53 by qL1cU46YIdK0
信息提示
请填处理意见