24小时热门版块排行榜    

查看: 225  |  回复: 4
当前主题已经存档。
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

jmn

银虫 (小有名气)

[交流] 求助求助哪位高手帮忙给翻译一下?

1、在反应釜中投入200升A、64公斤B,搅拌下加入5公斤C和53公斤D,通入蒸气,升温回流脱水。10小时后取样跟踪分析,保证B反应完全。降温到常温,加入500升水,搅拌半小时后静置15分钟,分层,分去下层水层,再用300升水水洗一次。升温脱出溶剂,当温度升至110ºC后关闭蒸气。减压蒸出剩余溶剂,蒸完后降温到室温。装桶,称重,取样分析。

[ Last edited by jmn on 2009-8-13 at 17:18 ]

» 猜你喜欢

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

monitor2885

至尊木虫 (职业作家)

队长

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
jmn(金币+20,VIP+0):真是非常感谢!你的翻译水平很高呀! 8-13 21:49
zap65535(金币+5,VIP+0):补发 12-23 13:01
在反应釜中投入200升A、64公斤B,搅拌下加入5公斤C和53公斤D,通入蒸气,升温回流脱水。10小时后取样跟踪分析,保证B反应完全。降温到常温,加入500升水,搅拌半小时后静置15分钟,分层,分去下层水层,再用300升水水洗一次。升温脱出溶剂,当温度升至110ºC后关闭蒸气。减压蒸出剩余溶剂,蒸完后降温到室温。装桶,称重,取样分析。

200 liters of A and 64 kg of B were put into reactor. Under mixing and adding 5 kg of C and 53 kg of D, the system was access to steam, and heated with recycled water to complete dehydration. After 10h, monitoring samples were made to ensure reaction B in completeness. Then, it was cooled to room temperature with adding 500 liters of water and stirring for half an hour. 15 minutes was necessary for standing, separation from water in low layer. 300 liters of water was used to wash the solution once. Solvent extrusion was made under high temperature. When temperature rose to 110oC steam, the valve was closed. After decompression to steam solvent remained, temperature of system was cooled to room temperature. Finally, loading into barrels, weighing and analysis of sample should be completed.
Retirement
5楼2009-08-13 20:23:48
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 5 个回答

wangwei2008

木虫 (职业作家)

小木虫之移花宫主

你这个是超临界萃取仪做的么?
2楼2009-08-13 18:08:26
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jmn

银虫 (小有名气)

to wangwei2008:
不是
3楼2009-08-13 19:09:14
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

xinyunsina

金虫 (小有名气)

★ ★ ★ ★ ★
jmn(金币+5,VIP+0):非常感谢您的帮忙! 8-13 21:50
在反应釜中投入200升A、64公斤B,搅拌下加入5公斤C和53公斤D,通入蒸气,升温回流脱水。10小时后取样跟踪分析,保证B反应完全。降温到常温,加入500升水,搅拌半小时后静置15分钟,分层,分去下层水层,再用300升水水洗一次。升温脱出溶剂,当温度升至110ºC后关闭蒸气。减压蒸出剩余溶剂,蒸完后降温到室温。装桶,称重,取样分析。

First, put 200 liters of A and 64 kilograms B into the reactor, and then, add 5 kg of C and 53 kg of D under the condition of mixing, access to steam and then heat and reflux to dewatering. Ten hours later, take and analysis samples to ensure the complete reaction of B . Cool to room temperature, add 500 liters of water to the mixture and standing for 15 minutes after whisked for half an hour to be layered. Discard the lower water and then wash for the second time with 300 liters of water. Heat to remove the solvent by steam until the temperature rise to 110℃. Decrease the pressure to remove the residual solvent and put to the room temperature. Barrel, weight and then sample and analysis.
4楼2009-08-13 19:29:49
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见