24小时热门版块排行榜    

CyRhmU.jpeg
查看: 1260  |  回复: 16
当前主题已经存档。

victor3828

金虫 (职业作家)

[交流] 【求助】ansys和ansys workbench计算结果比较

为啥都用国际单位这两个软件算的的位移相差这么大的量级!高手指点!

[ Last edited by victor3828 on 2009-7-28 at 17:12 ]
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jpwang

铜虫 (正式写手)

★ ★ ★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
kuhailangyu(金币+2,VIP+0):谢谢回帖交流 7-28 19:51
wuguocheng(金币+1,VIP+0):谢谢有心人 8-11 12:51
it should not be so huge difference, one of them must be wrong. i am afraid that the condition, materials or load is not correct for one case. would you provide more detailed information so that others can check it for you? one cannot infer anything just from the two pics.

[ Last edited by nono2009 on 2009-9-23 at 20:51 ]
2楼2009-07-28 15:57:20
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

mopsite

木虫 (著名写手)

★ ★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
kuhailangyu(金币+2,VIP+0):谢谢回帖交流 7-28 19:51
这两个 是一个软件阿. 看你都是用一个版本还是 两个版本了阿
3楼2009-07-28 15:57:25
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

victor3828

金虫 (职业作家)


wuguocheng(金币+1,VIP+0):谢谢有心人 8-11 12:51
ansys11.0,我是这样做的
两个软件中,用同一个模型,然后,加载同样的荷载,!然后比较结果!
4楼2009-07-28 16:03:22
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jpwang

铜虫 (正式写手)

★ ★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
kuhailangyu(金币+2,VIP+0):谢谢回帖交流 7-28 19:51
yes, i know you think you are right, but the thing is that what you thought right is not the way as you thought.

just check whether the materials is the same? the conditon is ok? as well as the load

that is what i can think of. yes, other factors may also affect the result, but just affect, not give a wrong result.

[ Last edited by nono2009 on 2009-9-23 at 20:52 ]
5楼2009-07-28 16:20:50
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

victor3828

金虫 (职业作家)

引用回帖:
Originally posted by jpwang at 2009-7-28 16:20:
yes, i know you think you are right, but the thing is that what you thought right is not the way as you thought.

just check whether the materials is the same? the conditon is ok? as well as t ...

好的,你等一下,我把我加载的参数放上来!稍等!
6楼2009-07-28 16:24:52
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

victor3828

金虫 (职业作家)

自己顶一下!
7楼2009-07-28 17:14:54
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jpwang

铜虫 (正式写手)

★ ★ ★
小木虫(金币+0.5):给个红包,谢谢回帖交流
kuhailangyu(金币+2,VIP+0):谢谢回帖交流 7-28 19:51
in ansys, your unit is mm
while in workbench it is m  
all your results are correct
8楼2009-07-28 18:04:24
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

victor3828

金虫 (职业作家)

引用回帖:
Originally posted by jpwang at 2009-7-28 18:04:
in ansys, your unit is mm
while in workbench it is m  
all your results are correct

请指出我ansys中那部分是mm,另外,我workbench中最后变形图上单位m可是我ansys和workbench如何换算,我有点乱,请高手指点我一下!
9楼2009-07-28 18:11:41
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

这不是马甲

10楼2009-07-28 18:19:00
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 victor3828 的主题更新
普通表情 高级回复(可上传附件)
信息提示
请填处理意见